HOMCOM 839-383 Adjustable Lounger Chair
Model Number: 839-383
Important Information
Please read carefully and retain for future reference.
Note: The following information is a consolidated translation of the provided multilingual content.
General Use and Safety Precautions
Instructions for Use:
- Place the chair stably on a flat floor.
- Keep away from open flames and heat sources.
- Do not overload the chair. The maximum load capacity is 120 kg.
Precautions Before Assembly:
- Prepare a clean and dry assembly area.
- Verify that the product is not damaged.
- Check that all parts are present.
Maintenance:
- Clean with a soft fabric.
- Regularly check the seating and structure.
Storage Conditions:
- Store the fabric completely dry in a clean and dry place to avoid mold.
Assembly Warning:
- Beware of crushing and cutting hazards during assembly.
The manufacturer declines all responsibility for damages caused by improper installation or weather conditions.
If the chair is equipped with powered seat height adjustments, only qualified personnel may replace or repair these components.
Assembly Instructions
The assembly process involves several steps using the provided hardware and parts. Please refer to the diagrams for detailed visual guidance.
Hardware Included:
- 1: M6*60mm (x12)
- 2: M6*25mm (x2)
- 3: M6*25mm (x2)
- 4: M6*12mm (x2)
- 5: M8*14mm (x8)
- 6: M6 (x10)
- 7: M6*60mm (x2, includes 1 spare)
- 8: Allen Key (x1)
Parts Included:
- 9: Main Seat/Backrest Assembly (x1)
- 10: Support Bar (x2) - 1125x65x18mm
- 11: Support Bar (x2) - 910x65x18mm
- 12: Leg Tube (x1) - Ø32x590mm
- 13: Leg Tube (x2) - Ø32x550mm
- 14: Leg Tube (x2) - Ø32x500mm
- 15: Base Plate (x2) - 500x65x18mm
- 16: Base Plate (x2) - 310x55x18mm
- 17: Support Bracket (x1) - 460x65x18mm
- 18: Support Bracket (x1) - 460x65x18mm
Assembly Steps:
Step 01:
Attach part 11 to part 9 using hardware 1 (x4) and 6 (x4). Attach part 14 to part 9 using hardware 1 (x4) and 6 (x4).
Step 02:
Attach part 10 to part 9 using hardware 1 (x4) and 6 (x4). Attach part 13 to part 9 using hardware 1 (x4) and 6 (x4).
Step 03:
Attach part 15 to part 10 and 12 using hardware 3 (x2) and 5 (x2). Attach part 15 to part 11 and 13 using hardware 3 (x2) and 5 (x2).
Step 04:
Attach part 16 to part 11 and 10 using hardware 2 (x2) and 5 (x2).
Step 05:
Attach part 17 to part 16 and 4 using hardware 7 (x2). Attach part 18 to part 15 and 1 using hardware 1 (x2) and 7 (x2).
Assembly is now complete. [✔️]
Contact Information
For any questions or assistance, please contact the customer care center:
- US: 001-877-644-9366, customerservice@aosom.com
- CA: 416-792-6088, customerservice@aosom.ca
- UK: 0044-800-240-4004, enquiries@mhstar.co.uk
- FR: 0033-1-84166106, aosom@mhfrance.fr
- DE: +49 40 87408465, service@aosom.de
- ES: 0034-931294512, atencioncliente@aosom.es
- IT: 0039-0249471447, clienti@aosom.it
- PT: 0034-931294512, info@aosom.pt
Imported by:
- US: Aosom LLC, 27150 SW Kinsman Rd Wilsonville, OR 97070 USA
- CA: Aosom Canada Inc., 7270 Woodbine Avenue, Unit 307, Markham, Ontario Canada L3R 4B9
- UK: MH STAR UK LTD, Unit 27, Perivale Park, Horsenden lane South Perivale, UB6 7RH
- FR: MH FRANCE, 2 Rue Maurice Hartmann, 92130 Issy Les Moulineaux, France
- DE: MH Handel GmbH, Wendenstraße 309, D-20537 Hamburg, Germany
- ES/PT: SPANISH AOSOM, S.L, C/ROC GROS,N°15.08550, ELS HOSTALETS DE BALENYÀ, SPAIN.
- IT: AOSOM Italy srl, Centro Direzionale Milanofiori, Strada 1 Palazzo F1, 20057 Assago (MI)
Manufacturing Country: MADE IN CHINA / FABRIQUÉ EN CHINE / HECHO EN CHINA / FATTO IN CINA / FEITO NA CHINA
Recycling Information
Please recycle this product responsibly. [♻️]
