AstroAI BC3 Portable Electric Air Pump
User Manual
Introduction
Thank you for purchasing the AstroAI Portable Electric Air Pump. This device is designed and tested to provide the best inflating experience. Use the pump indoors and outdoors to inflate airbeds, inflatable mattresses, pillows, floats, camping equipment, and other household items. This device features a high-quality lithium-ion battery and a built-in flashlight.
Thank you again for choosing AstroAI. If you have any questions or concerns regarding your device, please email support@astroai.com.
Read this entire manual before using this device and save it for future reference.
Warning
- This device includes small accessories. Do not allow children to operate, interact with, or play with the air pump or its accessories.
- Store this device in a dry place away from direct sunlight.
- Do not disconnect or modify any part of the electric air pump.
- Keep the device away from flames, corrosive liquids, and strong acids.
- Do not use or store the air pump in a humid environment.
- Do not use the air pump for purposes other than those indicated.
- Do not use the air pump continuously for more than 15 minutes. Allow it to cool down before the next use.
- Keep hair, gravel, rocks, and other foreign objects out of the air pump. These objects can cause the pump to be damaged or stop working.
- While the pump is operating, keep your eyes at a safe distance from the inflation and deflation ports.
- Do not insert fingers into any part of the pump.
- After the air pump has finished charging, quickly disconnect the power supply.
- This electric air pump contains a lithium-ion battery pack that users should not discard; dispose of it properly according to your local regulations.
Package Includes
| Portable Electric Air Pump | x 1 |
| Charging Cable | x 1 |
| Storage Bag | x 1 |
| Nozzles | x 5 |
| User Manual | x 1 |
| Warranty Card | x 1 |
Diagram
The device features the following parts:
- 1. Strap Handle
- 2. Power Button
- 3. Light Button
- 4. Charging Port
- 5. Lighting Area
- 6. Inflation Port
- 7. Deflation Port
Diagram showing the AstroAI BC3 Portable Electric Air Pump with labeled parts.
Dimensions
The pump has the following dimensions:
- Height: 3.7 inches / 93 millimeters
- Width: 2 inches / 52 millimeters
Diagram showing the dimensions of the AstroAI BC3 Portable Electric Air Pump.
Instructions
Inflation/Deflation
- Select Nozzles: Attach the appropriate nozzle to the inflation/deflation port. Diagram showing a nozzle being attached to the inflation port.
- Connection: Connect the other end of the nozzle to the inflatable item. Diagram showing the nozzle connected to an inflatable item.
- Start: Press and hold the Power Button for 2 seconds to start the pump. Diagram showing a finger pressing and holding the power button.
- Stop: Press the Power Button once to turn off the pump when the desired inflation/deflation level is reached. Diagram showing a finger pressing the power button once.
Nozzle Selection
- 1. Vacuum Storage Bags
- 2. Inflatable Mattresses; Floating Beds
- 3. Air Mattresses; Air Pillows
- 4. Swim Rings; Inflatable Toys
- 5. Used Alone: suitable for inflatable boats
- Use in Connection: suitable for outdoor air cushions
Diagram showing five different nozzles and their typical uses.
Lighting
- Turn on Light: Press and hold the Light Button for 2 seconds. Diagram showing a finger pressing and holding the light button.
- Adjust Lamp: Press and hold the button to adjust the brightness of the light. Diagram showing a finger pressing and holding the light button to adjust brightness.
- Turn off Lamp: Press the button once. Diagram showing a finger pressing the light button once.
Charging
- Low Battery Indicator: When the battery is less than 20% charged, the red indicator will light up to signal its low battery level. Quickly charge the device to ensure normal operation.
- Charging Status: The indicator will light up red when the device is charging. After the device is fully charged, the indicator will light up green.
Technical Specifications
| Model | BC3 |
| Input Voltage | 5V DC |
| Operating Voltage | 3.7V |
| Maximum Current | 5A |
| Rated Power | 45W |
| Inflation Speed | 300L/min |
| Maximum Operating Pressure | 0.5 PSI |
| Maximum Operating Time | 15 minutes |
| Lighting Level | 100 Lumens |
| Battery Capacity | 3000mAh |
| Dimensions | 3.7 in x 2 in (93 mm x 52 mm) |
Troubleshooting
The Pump Does Not Work
- Ensure the battery is sufficiently charged.
Poor Inflation/Deflation
- Check if the nozzle is properly connected.
- Check if the battery level is too low.
- Excessive use will slow down the device's inflation/deflation speed; let it rest for at least 10 minutes.
Air Leaks During Use
- Ensure the nozzle is properly connected.
Recycling
You can dispose of this device when its lifespan has ended; recycle recyclable parts according to your local regulations.
Warranty Period
AstroAI 2-Year Limited Warranty.
Each AstroAI Portable Electric Air Pump shall be free from defects in materials and workmanship. This warranty does not cover damage from negligence, misuse, contamination, alteration, accidents, or abnormal conditions of operation or handling. This warranty covers only the original purchaser and is non-transferable.
Contact Us
AstroAI always wants to provide our customers with excellent devices and customer service. Questions or concerns? We'd be happy to help! Please contact us via support@astroai.com.
Web: www.astroai.com
E-Mail: support@astroai.com
