Installation Guide

General Notes

No modifications of the luminaire which the LED lamp is to be used with are to be made.

This lamp may not be suitable for use in all applications where a traditional fluorescent lamp has been used. The temperature range of this lamp is more restricted. In cases of doubt regarding the suitability of the application, the manufacturer of this lamp should be consulted. This lamp is designed for general lighting service (excluding e.g. explosive atmospheres).

• This lamp is not suitable to be used in emergency luminaires designed for double-capped fluorescent lamp(s).
• Do not touch the lamp until it cools down.

Installation with Electronic (HF) Ballast

Step 1: Turn off power.

Step 2: Remove original fluorescent lamp.

Step 3: Wiring Diagram. The diagram shows the original fluorescent lamp fixture. Mains power (Line 'L', Neutral 'N') is connected to an electronic ballast. The ballast then provides power to the lamp holders. The original fluorescent lamp is removed, and the LED lamp is installed in its place, connected to the same lamp holders.

Step 4: Insert LED lamp.

Step 5: Turn on power.

Installation for AC Mains only

This fixture has been modified and can no longer operate the original fluorescent lamp.

Step 1: Turn off power.

Step 2: Remove original fluorescent lamp.

Step 3: Wiring Diagram. This diagram shows a modified fixture where the original ballast has been bypassed. Mains power (Line 'L', Neutral 'N') is now connected directly to the lamp holders, powering the LED lamp.

Step 4: Insert LED lamp.

Step 5: Turn on power.

Disposal Information

Please inform yourself about the local waste disposal, separation and collection system for electrical and electronic products and packaging. Please act according to your local rules and do not dispose your old product and packaging with your normal household waste. The correct disposal of the packaging, your product and/or batteries will help prevent potential negative consequences for the environment and human health. Batteries should be disposed separately from the municipal waste stream via designated collection facilities. When disposing a product that contains non-user replaceable batteries, the non-user replaceable batteries shall be removed by a professional.