Philips CorePro - LED HID HPL
Product Overview
The Philips TrueForce Core LED HPL lamps offer an easy, LED solution with a short payback period for replacing High Intensity Discharge (HID) lamps. This new generation of LED Core Post-Top lamps provides the energy efficiency and long-lifetime benefits of LED for HID replacement, delivering instant savings with a low initial investment. TrueForce CorePro LED HPL lamps are designed to match the lamp size and light distribution of their HID alternatives. Featuring high-power LED filament technology, they offer a seamless transition. The unique IP65 design allows TrueForce Core LED HPL Post-Top lamps to be used in both outdoor and indoor applications.
Warnings and Safety
- Installation should always be performed by a qualified electrician or installer.
- Refer to the installation guide for detailed instructions.
Product Data - General Information
| Parameter | Value |
|---|---|
| Cap-Base | E27 |
| Nominal lifetime | 25,000 hour(s) |
| Switching Cycle | 50,000 |
| Lighting Technology | LED |
| Flux measurement reference | Sphere |
Product Data - Light Technical
| Parameter | Value |
|---|---|
| Color Code | 840 [CCT of 4000K] |
| Beam Angle (Nom) | 300 degree(s) |
| Luminous Flux | 4,000 lm |
| Color Designation | Cool White (CW) |
| Correlated Color Temperature (Nom) | 4000 K |
Product Data - Luminous Efficacy & Consistency
| Parameter | Value |
|---|---|
| Luminous Efficacy (rated) (Nom) | 163 lm/W |
| Color Consistency | <6 |
| Color rendering index (CRI) | 80 |
| LLMF At End Of Nominal Lifetime (Nom) | 70 % |
| Photobiological safety according to EN 62471 | RG0 |
Product Data - Operating and Electrical
| Parameter | Value |
|---|---|
| Input Frequency | 50 to 60 Hz |
| Power Consumption | 24.5 W |
| Lamp Current (Nom) | 175 mA |
| Starting Time (Nom) | 0.5 s |
| Warm-up time to 60% light | 0.5 s |
| Power Factor (Fraction) | 0.5 |
Product Data - Voltage & Ballast Compatibility
| Parameter | Value |
|---|---|
| Voltage (Nom) | 220-240 V |
| Ballast Compatibility | Mains only |
| Inrush current at mains | 10.6 |
| Max. lamp no. on MCB B type 10A - Mains | 30 |
| Max. lamp no. on MCB B type 10A – EM ballast without Compensation Capacitor. | - |
| Max. lamp no. on MCB B type 10A – EM ballast with Compensation Capacitor. | - |
| Max. lamp no. on MCB B type 16A - Mains | 49 |
| Max. lamp no. on MCB B type 16A – EM ballast without Compensation Capacitor. | - |
| Max. lamp no. on MCB B type 16A – EM ballast with Compensation Capacitor. | - |
Product Data - Energy Consumption & Compliance
| Parameter | Value |
|---|---|
| Energy Consumption kWh/1000 h | 25 kWh |
| EPREL Registration Number | 1962815 |
| CE mark | Yes |
| EU RoHS compliant | Yes |
| Flickering value (PstLM) - Flickering value as per EN 61000-3-3 | 1 |
| Stroboscopic effect visibility measure (SVM) | 1.6 |
| Ambient temperature range | -30 to +45 °C |
Application Conditions
| Parameter | Value |
|---|---|
| Can it be used in closed luminaires | Yes |
Product Data - Ordering Information
| Parameter | Value |
|---|---|
| Order product name | TForce Core LED HPL 24.5W E27 840 FR |
| Full product name | TForce Core LED HPL 24.5W E27 840 FR |
| Full product code | 872016933635300 |
| Order code | 929003836602 |
| Material Nr. (12NC) | 929003836602 |
| Numerator - Quantity Per Pack | 1 |
| EAN/UPC - Product/Case | 8720169336353 |
| Numerator - Packs per outer box | 6 |
| EAN/UPC - Case | 8720169336360 |
Product Dimensions
| Product | D | C |
|---|---|---|
| TForce Core LED HPL 24.5W E27 840 FR | 91.5 mm | 218 mm |
Note: The dimensional drawing shows the lamp's dimensions, labeled D and C, with values 91.5 mm and 218 mm respectively.
Photometric Data
Light Distribution Diagram: This diagram illustrates the light intensity distribution of the TForce Core LED HPL 24.5W E27 840 FR lamp in various directions, indicated by polar coordinates (cd/1000lm).
Spectral Power Distribution Colour: This graph shows the spectral output of the TForce Core LED HPL 24.5W E27 840 FR lamp, plotting intensity (%) against wavelength (nm). The distribution peaks in the blue, green, and yellow regions of the spectrum, characteristic of white LED light.
Lifetime - Life Expectancy Diagram: This graph depicts the failure rate (%) of the lamps over operating hours. It shows a low failure rate initially, gradually increasing over time up to 40,000 hours.
Lumen Maintenance Diagram: This graph illustrates the lumen maintenance of the TForce Core LED HPL 24.5W E27 840 FR lamp, showing the percentage of initial luminous flux remaining over operating hours. The output gradually decreases from 100% at 0 hours to approximately 70% at 50,000 burning hours.
Data last updated: January 28, 2025. Data subject to change.
For more information, visit www.lighting.philips.com.
Philips and the Philips Shield Emblem are registered trademarks of Koninklijke Philips N.V.
Sustainable LED lighting solutions | Philips lighting
