GreenYi 1280*720 Wireless 4CH DVR System with IPS Screen

1. Introducing

Thank you for purchasing our Digital Wireless 2-4 Camera System! This manual will enable you to properly install and operate the system.

Digital Wireless Details: This product uses the latest wireless point-to-point connection technology. It will not interfere with other wireless devices.

Install this Digital Wireless 2-4 Camera System on any vehicle. 960P cameras need to be powered by connecting the wires to any direct power source. Once the system has power, the images are wirelessly transmitted from the camera to the monitor.

The LCD monitor must be directly powered to a power source from either the cigarette lighter adapter, ACC, or directly to the battery (highly recommended). There is no need to run any wires from the camera to the monitor.

The monitor has the latest pedestrian detection chip built in and supports blind spot alert function. This function is turned off by default. If necessary, please turn it on in the settings.

Tip: The "SEL" button on the display is the recording button. Pressing it once can start/pause video recording. It also serves as the confirmation button in the menu settings.

2. Blind Zone Function

System Overview: An illustration shows the GreenYi wireless camera system components: a central monitor displaying four camera feeds labeled CH1, CH2, CH3, CH4, a DVR unit, and four compact wireless cameras.

Monitor Interface and Features: The monitor's interface displays various control buttons such as PAIRING, PICTURE, FLIP, MODE, SMART, PLAYBACK, RECORDING, and SYSTEM. Settings menus are also shown, including options for Alarm sound, Blind zone warning, BSD (Blind Spot Detection) enable, Calibration, and Alarm sensitivity.

SMART Features & Settings:

• Calibration: Allows for system calibration.
• Set Interface: Provides options for adjusting alarm sensitivity (High, Middle), identifying lines, and saving results.
• Adjust Line Width: Users can adjust the width of guide lines.
• Guide Lines Moving UP or Down: Guide lines can be repositioned vertically.

Rear Camera View Example: A view from a rear-mounted camera shows a road with cyclists, overlaid with green guide lines for parking assistance. An audio indicator labeled 'MOVING SPOT Speaker' is visible.

Tips

We recommend performing a benchmark test before fully installing the system on a vehicle to ensure all components are working properly. Consult an experienced technician if you are not familiar with installing a 2-4 camera system.

FAQ

1. Is the camera water resistant?

   Yes, the camera is IP69 Rating waterproof. It can be placed outside and can be cleaned using a pressure washer.

2. Can this be used as a full-time camera on the rear of a travel trailer for better vision of surrounding vehicles?

   Yes, this wireless 2-4 camera system works as a full-time camera on the rear of a travel trailer or can be located anywhere on the vehicle. It is your preference for camera installation locations, provided your camera and monitor have continuous power.

3. Will this work on a fifth-wheel camper?

   Yes, this system will work on any vehicle and can also be used at home.

4. I am using one camera for reversing; How do I mirror the image?

   Please press the flip button on the monitor.

5. Further questions?

   You are always welcome to contact us.