Introduction
Congratulations on your purchase of a Smart, Remote Bluetooth-connected Thermometer/ Hygrometer. You will now be able to remotely monitor the temperature and humidity of your living room, bedroom, greenhouse and etc. from your smartphone.
Components
- One Bluetooth Indoor Thermometer Hygrometer
- One AAA Battery
- One User Manual
Features
The ThermoPro TP357 includes the following features:
- Temperature Display
- Bluetooth Icon ?
- Humidity Display
- Comfort Level Indicator
- °F / °C Button
- Hanging Hole
- Magnet
- Battery Compartment Door
Specifications:
- Temperature range: -4°F to 140°F (-20°C to 60°C)
- Temperature accuracy: +/-1.0°F (+/-0.5°C)
- Humidity range: 10% to 99%
- Humidity accuracy: +/- 2%RH
Comfort Level Icons:
The device displays comfort levels based on humidity:
- If humidity is below 30%: ? [Comfortable]
- If humidity is between 30% to 60%: ? [Slightly Uncomfortable]
- If humidity is above 60%: ? [Uncomfortable]
Connectivity & Power:
- Wireless Bluetooth range: 260ft/80m
- Power source: One AAA battery (1.5V)
- Connectivity: 2.4GHz wireless Bluetooth function, connects to smartphone app via Bluetooth.
Device Controls:
- °F /°C button: Press to toggle the temperature display unit between °F and °C. Press and hold for two seconds to enter pairing status.
Mounting Options:
- Magnet-mountable and wall-mounted design.
Usage
Follow these steps to set up your ThermoPro Bluetooth Thermometer/Hygrometer and remotely monitor your environment:
Step 1: Download and install the “ThermoPro Sensor” App.
Scan the QR code below for your smartphone's operating system, or search for "ThermoPro Sensor" on the Apple App Store (iOS) or Google Play Store (Android). Download and install the app.
App Requirements:
- iPhone and iPad apps require iOS 9.0 and above.
- Android apps require versions 4.4 and above.
- Android users may need to grant app permissions.
App Download QR Codes:
For iOS: [QR code for downloading the ThermoPro Sensor app for iOS]
For Android: [QR code for downloading the ThermoPro Sensor app for Android]
Step 2: Enable Bluetooth on your smartphone.
Navigate to your smartphone's Settings section and enable Bluetooth. If Bluetooth is already enabled, you can skip this step.
Step 3: Insert the battery.
Insert one AAA battery into the battery compartment on the back of the thermometer, ensuring correct polarity (+ and -) as indicated.
Step 4: Initial Display and Pairing Readiness.
The temperature and humidity will be displayed on the thermometer screen. The Bluetooth icon ? will be flashing, indicating the device is ready for pairing for approximately 2 minutes.
Step 5: Pair the thermometer with the app.
Launch the ThermoPro Sensor App on your smartphone and press the ➕ [Add icon] to add a thermometer. The app will display a list of available thermometers; select your device to pair.
Once pairing is complete, the Bluetooth icon ? on the thermometer display will stop flashing, and the current temperature and humidity will be shown on the app.
Troubleshooting Pairing: If the Bluetooth icon ? stops flashing and pairing is not complete, press and hold the °F /°C button on the back of the unit for 2 seconds. The Bluetooth icon ? will begin flashing again, indicating pairing status.
For any questions or further assistance with setup, please contact ThermoPro Customer Service.
Declaration of Conformity
ThermoPro hereby declares that this product complies with the basic requirements and applicable regulations of the Radio Equipment Directive 2014/53/EU and the EMC Directive 2014/30/EU.
The complete declaration of conformity can be found at: https://itronicsmall.com/eudeclaration-of-conformity/complies
Disposal of the electronic appliance
This electronic appliance should not be disposed of with normal household waste. Please dispose of the unit at an approved facility or your local recycling center. Observe current rules and regulations when disposing of the appliance. Contact your local council if you are in doubt. ♻️ [Recycling symbol]
Limited One-Year Warranty
ThermoPro warrants this product to be free of defects in parts, materials, and workmanship for a period of one year from the date of purchase. Should any repairs or servicing under this warranty be required, contact ThermoPro Customer Service by phone or email for instructions on how to pack and ship the product.
This warranty grants you specific legal rights, and you may also have other rights that vary from state to state.
Customer Service
Telephone:
- 1-877-515-7797 (USA & Canada only)
- 44-808-164-1683 (UK)
Email: service@buythermopro.com
Hours:
- Weekdays 8:00 AM - 8:00 PM EST (USA & Canada only)
- Weekdays 1:00 PM - 12:00 AM CET (UK)
Documents / Resources
You can find the official ThermoPro TP357 Bluetooth Thermometer/Hygrometer User Manual in PDF format.
Related Document: ThermoPro TP357 Bluetooth Thermometer/Hygrometer [pdf] User Manual
