PAX D200 Mobile Payment Terminal Installation Manual

1. Installation

SAM/SIM Card:

  1. Remove the battery cover (At the bottom of the terminal).
  2. Remove the battery.
  3. Insert the SAM/SIM card to the corresponding card slot.

Battery:

Alignment battery tip side to battery tip in terminal and insert.

2. Instructions

1) Power ON/OFF

Power on: Plug in power adapter or insert the battery, Press [power-button] for 3 seconds until 'Di' is heard, and then PAX LOGO will display on LCD.

Power off: Press [power-button] for 3 seconds until Shutting down... can be seen. POS terminal is being turned off.

2) IC Card

Put IC card chip side upward, push-in IC card slot and to bottom.

3) Contactless Card

The card read area is above the LCD. Put the card above the LCD.

4) Battery Charge display

Connecting USB port with external adapter can charge the battery. There is a charging display.

5) Battery Charge style

Please use the original adapter instead of a PC USB port if you need to charge.

3. Installation and Usage Tips

  1. Avoid putting the terminal in direct sunlight, high temperature, moist, or dusty environment.
  2. Forbid non-professional to repair the terminal.
  3. Before inserting the card, please check internal and around of the IC card slot. When you found some suspicious objects, must report to related administrator.

4. Lithium Ion Battery Usage Tips

  1. Avoid putting the battery in sunlight or smoke, dusty environment.
  2. Forbid crushing, treading, or throwing the battery into fire or liquid.
  3. Replace the battery immediately if it is damaged (exothermic or distorted).
  4. It is recommended to change the battery that has been used for more than two years.

FCC Regulations (Only applicable to the terminals)

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment complies with Part 68 of the FCC rules and the requirements adopted by the ACTA. On the body of this equipment is a label that contains, among other information, a product identifier. If requested, this number must be provided to the telephone company.

RF Exposure Information (SAR)

This device is designed and manufactured not to exceed the emission limits for exposure to radio frequency (RF) energy set by the Federal Communications Commission of the United States. These limits are part of comprehensive guidelines and establish permitted levels of RF energy for the general population. The guidelines are based on standards that were developed by independent scientific organizations through periodic and thorough evaluation of scientific studies. The standards include a substantial safety margin designed to assure the safety of all persons, regardless of age and health. The exposure standard for wireless mobile Countertop Payment Terminals employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted with the Countertop Payment Terminal transmitting at its highest certified power level in all tested frequency bands. Although the SAR is determined at the highest certified power level, the actual SAR level of the Countertop Payment Terminal while operating can be well below the maximum value. This is because the Countertop Payment Terminal is designed to operate at multiple power levels so as to use only the power required to reach the network. In general, the closer you are to a wireless base station antenna, the lower the power output.

Before a Countertop Payment Terminal model is available for sale to the public, it must be tested and certified to the FCC that it does not exceed the limit established by the government adopted requirement for safe exposure. The tests are performed in positions and locations (e.g., at the ear and worn on the body) as required by the FCC for each model. The highest SAR value for this model Countertop Payment Terminal when tested for use on the body, as described in this user guide, is 0.563W/Kg. Body-worn measurements differ among Countertop Payment Terminal models, depending upon available accessories and FCC requirements. The maximum scaled SAR in hotspot mode is 0.563W/Kg. While there may be differences between the SAR levels of various Countertop Payment Terminals and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model Countertop Payment Terminal with all reported SAR levels evaluated as in compliance with the FCC RFexposure guidelines. SAR information on this model Countertop Payment Terminal is on file with the FCC and can be found under the Display Grant section of http://www.fcc.gov/oet/fccid after searching on FCC ID: V5PD200HS.

Additional information on Specific Absorption Rates (SAR) can be found on the Cellular Telecommunications Industry Association (CTIA) web-site at http://www.wow-com.com. In the United States and Canada, the SAR limit for mobile Countertop Payment Terminals used by the public is 1.6 watts/kg (W/kg) averaged over one gram of tissue. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in measurements.

Body-worn Operation

This device was tested for typical body-worn operations. To comply with RF exposure requirements, a minimum separation distance of 10mm must be maintained between the user's body and the handset, including the antenna. Third-party belt-clips, holsters, and similar accessories used by this device should not contain any metallic components. Body-worn accessories that do not meet these requirements may not comply with RF exposure requirements and should be avoided. Use only the supplied or an approved antenna.

Hereby, PAX Computer Technology (Shenzhen) Co., Ltd. declares that the radio equipment type D200 is in compliance with Directive 2014/53/EU.

PAX TECHNOLOGY LIMITED

To know more product details, please visit http://www.pax.com.cn

P/N: 200312000000206

Models: D200HS, V5PD200HS, D200 Mobile Payment Terminal, Mobile Payment Terminal

File Info : application/pdf, 4 Pages, 220.38KB

PDF preview unavailable. Download the PDF instead.

GetApplicationAttachment.html?id=4964136

References

Microsoft Office Word 2007

Related Documents

Preview PAX D190 Mobile Payment Terminal Installation Manual
This document provides installation and usage instructions for the PAX D190 Mobile Payment Terminal, covering component checklists, setup procedures for SAM cards and batteries, operational instructions, environmental considerations, battery care, and regulatory compliance information.
Preview PAX D195 Mobile Payment Terminal Quick Setup Guide
A concise guide for installing, operating, and maintaining the PAX D195 mobile payment terminal, including essential usage tips and regulatory compliance information.
Preview PAX IM20 POS Terminal Quick Setup Guide
Get started with your PAX IM20 POS Terminal. This guide covers setup, installation, card reader interfaces, maintenance, and important compliance information for the IM20 payment device.
Preview PAX D180 mPOS Terminal: User Manual & Quick Start Guide
Get started with your PAX D180 mPOS terminal. This guide covers setup, operation, card handling (magnetic stripe and smart card), charging, and important FCC/ISED compliance information.
Preview PAX A910 Smart Mobile Payment Terminal Installation Manual
This document provides installation instructions and important safety information for the PAX A910 Smart Mobile Payment Terminal. It covers the product checklist, description, installation steps, instructions for use, general usage tips, safety warnings, working mode tips, environmental parameters, and FCC regulations.
Preview PAX A930RTX Smart Mobile Payment Terminal Quick Setup Guide
Concise and SEO-optimized guide for setting up the PAX A930RTX Smart Mobile Payment Terminal, covering checklist, product description, installation, instructions, safety warnings, and FCC/ISED regulations.
Preview PAX IM15 Unattended Payment Terminal Quick Setup Guide
A comprehensive quick setup guide for the PAX IM15 Unattended Payment Terminal, covering product description, installation, instructions, maintenance, and compliance information.
Preview PAX S920 Electronic Payment Terminal: Internal Photographs and Component Details
Explore the internal structure of the PAX S920 electronic payment terminal through detailed photographs. This document highlights key components such as antennas (WWAN, NFC, Bluetooth, WLAN), SIM card slots, and the main PCB, offering a comprehensive visual overview for technical reference.