Manuals+

SATEL XD-2 Universal Detector - Quick Installation Guide

This guide provides essential information for the installation of the SATEL XD-2 universal detector. For detailed instructions, please refer to the full manual available at www.satel.eu.

Important Safety Information:

Detector Functions

The XD-2 detector can operate as:

Refer to the full manual for specific guidance on selecting the detector type and installation location.

Installation Steps

  1. Open the detector enclosure.
  2. Configure the detector (refer to the full manual).
  3. Create an opening for the cable in the enclosure base.
  4. Run the cable through the opening.
  5. Secure the enclosure base to the mounting surface using appropriate wall plugs and screws. Ensure wall plugs are suitable for the mounting surface.
  6. Connect the wires to the appropriate terminals:
    • LED: Enable/disable the LED indicator.
    • SNS: Input for connecting an NC type detector (e.g., another magnetic contact) or a flood probe. If unused, connect the terminal to common ground (COM).
    • S: Alarm output (NC relay), used when the two output mode is activated (refer to the full manual).
    • NC: Alarm output (NC relay).
    • TMP: Tamper output (NC).
    • COM: Common ground.
    • +12V: Power input.
  7. Close the detector enclosure.
  8. If used as a magnetic contact, install the magnet (refer to the full manual).
  9. If used as a water flood detector, install the probe.
  10. Power up the detector.
  11. Verify the device is functioning correctly.

Environmental Disposal

When the device reaches the end of its service life, it should not be discarded with household waste. Electronic equipment should be delivered to a specialized collection center for recycling. Proper disposal helps protect the environment and natural resources.

Further Information

The full manual and Declaration of Conformity are available on the SATEL website: www.satel.eu. Scan the provided QR codes to access these resources.

Models: XD-2 Multipurpose Detector, XD-2, Multipurpose Detector, Detector

File Info : application/pdf, 2 Pages, 828.17KB

PDF preview unavailable. Download the PDF instead.

xd-2 sii int 5d76f2f2

References

Adobe PDF Library 16.0.3 Adobe InDesign 17.0 (Windows)

Related Documents

Preview SATEL DMP-100, DRP-100, DCP-100 Fire Detectors User Manual
User manual for SATEL's DMP-100 multisensor smoke and heat detector, DRP-100 optical smoke detector, and DCP-100 heat detector. Covers features, installation, maintenance, and specifications for fire alarm systems, compliant with EN standards.
Preview Satel ASD-200 Wireless Smoke and Heat Detector Manual
Comprehensive manual for the Satel ASD-200 wireless smoke and heat detector, covering features, installation, maintenance, battery replacement, and specifications. Learn how to effectively use and maintain your fire detection device.
Preview SATEL AOCD-260 Wireless Outdoor Dual Technology Curtain Detector Manual
User manual for the SATEL AOCD-260 wireless outdoor dual technology curtain detector. Covers features, description, alarms, operating modes, installation, and specifications. Compatible with ABAX 2 and ABAX systems.
Preview Satel TSD-1 Smoke and Heat Detector User Manual
Comprehensive guide to the Satel TSD-1 combined smoke and heat detector, covering features, installation, configuration, maintenance, and technical specifications.
Preview SATEL TSD-1 Smoke and Heat Detector Quick Installation Guide
A concise guide for the quick installation of the SATEL TSD-1 smoke and heat detector, covering essential steps and safety precautions in multiple languages.
Preview TSD-1 Smoke and Heat Detector | SATEL | Technical Manual & Specifications
Comprehensive technical manual and specifications for the SATEL TSD-1 multisensor smoke and heat detector. Learn about features, installation, maintenance, and compliance.
Preview SATEL ACMD-200 DE Carbon Monoxide Detector Manual
Comprehensive manual for the SATEL ACMD-200 DE carbon monoxide detector, covering features, operation, installation, mounting, battery replacement, and technical specifications for both autonomous and ABAX 2 system use.
Preview SATEL DG-1 Gas Detectors: CO, LPG, Methane, and Soporific Gases - User Manual
Comprehensive user manual for SATEL DG-1 series gas detectors, including DG-1 CO (Carbon Monoxide), DG-1 LPG (Liquefied Petroleum Gas), DG-1 ME (Methane), and DG-1 TCM (Soporific Gases). Covers features, description, installation, specifications, and signaling for each model.