Secretlab TITAN Evo Usage Guide

Key Adjustment Features

• Backrest Recline Adjustment
• Height Adjustment
• Multi-Tilt Adjustment
• L-ADAPT™ Lumbar Support Adjustment
• Armrest Adjustment

Chair Overview

The Secretlab TITAN Evo chair offers several adjustment points for personalized comfort. These include:

• Lumbar Curvature: Adjusts the inward curve of the lumbar support.
• Lumbar Height: Adjusts the vertical position of the lumbar support.
• Backrest Recline: Allows the backrest to tilt backward.
• Chair Height: Adjusts the overall height of the seat.
• 4D Armrests: Armrests that can be adjusted in four directions (up/down, forward/backward, left/right, and pivot).
• Tilt Lock: Engages or disengages the tilt mechanism.
• Tilt Tension: Controls the resistance of the tilt mechanism.

A. Backrest Recline Adjustment

Adjustment Range: 85-165° (Tilt Unlocked)

1. Shift your weight off the backrest slightly and pull up fully on the lever.
2. Lean back slowly until the backrest is at your desired angle.
3. Slowly return the lever to its starting position. Ensure that the lever locks back in place.

Visual Description: A diagram shows a lever being pulled upwards to release the backrest, which then reclines to different angles.

B. Height Adjustment

Adjustment Range: 7.5 cm (S and R sizes), 9.5 cm (XL size)

1. To lower the height of your chair, pull up on the height adjustment lever while seated. Release the lever when you have reached the desired height.
2. To raise the height of your chair, pull up on the height adjustment lever with your weight off the chair. Release the lever when you have reached the desired height.

Visual Description: A diagram illustrates pulling a lever under the seat to adjust the chair's height, with arrows indicating upward and downward movement.

C. Multi Tilt Adjustment

Adjustment Range: 0-30°

Tilt Angle

1. Push down on the tilt lever handle to unlock the multi-tilt mechanism.
2. Lean your weight back slowly until the seatbase is at your desired angle.
3. Pull up on the tilt lever handle to lock the seatbase tilt angle.

Tilt Tension

1. Turn the tension knob clockwise to loosen the rocking tension of the chair. Turn anti-clockwise to tighten.
2. Adjust according to your weight; more weight requires more tension.

Visual Description: Diagrams show how to operate the tilt lever to adjust the angle and a knob for controlling tilt tension.

D. L-ADAPT™ Lumbar Support Adjustment

Important Notes:

• Do not put weight on the backrest when adjusting your lumbar support.
• Do not turn the knobs past their maximum and minimum points.
• Do not attempt to turn both knobs at the same time.

Height Adjustment

Turn the knob anti-clockwise to lower the height of the lumbar support, and clockwise to raise it.

Curvature Adjustment

Turn the knob anti-clockwise to decrease the curvature of the lumbar support, and clockwise to increase it.

Visual Description: Diagrams show two knobs on the back of the chair. One adjusts the height of the lumbar support (labeled 'LOWER' and 'HIGHER'), and the other adjusts its curvature (labeled with '-' for decrease and '+' for increase).

E. Armrests Adjustment

The armrests are adjustable in multiple ways:

• 01 Height Lever: Pull the lever up and adjust to your desired height. Release to lock the height.
• 02 Front Button: Press the button to adjust the angle and front-back position. Release to lock the position.
• 03 Inner Side Button: Press the button to adjust the side-side position. Release to lock the position.

Visual Description: Diagrams illustrate the operation of the armrest adjustments, showing a lever for height, a button for front/back and angle, and another button for side-to-side movement.