Secretlab OTTO™ Adjustable Legrest User Manual
Designed for Secretlab Chairs
Lounge in Comfort
The Secretlab OTTO™ Adjustable Legrest is exclusively designed with dedicated, personalized leg support for your Secretlab chair. The legrest offers the ability to adjust the height, incline, and distance from your chair, bringing tailored comfort across multiple sitting and lounging positions.
Contents
Usage
Height Adjustment
Position the Secretlab OTTO™ just below the seat base of your chair. This ensures your knees are at or slightly below hip level, promoting a neutral posture for comfort.
- Lift and hold the left lever to raise the legrest cushion to its maximum height.
- Use your other hand to press down on the center of the cushion to lower it to the desired height between 39-47cm.
- Release the lever to lock the legrest at the desired height.
Diagram Description: Visuals show the lever operation for height adjustment, indicating the 39-47cm range.
Incline Adjustment
Tilt the Secretlab OTTO™ to match your chair's backrest configuration. Adjust the legrest to a gentler incline as you recline or tilt your chair backward.
- Lift and hold the right lever to adjust the tilt across 5 incline angle settings (0°, 7.5°, 15°, 22.5°, and 30°).
- Place your other hand on the side of the legrest cushion that is facing away from your chair:
- A) For a steeper incline, press down on the cushion edge.
- B) For a gentler incline, lift the cushion edge.
- Release the lever to lock the legrest at the desired incline. You should hear a click when it is locked in place.
Diagram Description: Visuals show the lever operation for incline adjustment, demonstrating how to achieve steeper (A) or gentler (B) inclines by pressing or lifting the cushion edge.
Recommended Setup Configurations
Upright
Backrest Recline: 90° - 100°
Legrest Incline: 22.5° - 30°
Suggested Activities: Working, gaming
Diagram Description: A figure is shown in an upright chair position with the legrest at a 22.5°-30° incline.
Semi-Reclined Lounging
Backrest Recline: 110° - 135°
Legrest Incline: 7.5° - 15°
Suggested Activities: Watching videos
Diagram Description: A figure is shown in a semi-reclined chair position with the legrest at a 7.5°-15° incline.
Full-Reclined Lounging
Backrest Recline: >135°
Legrest Incline: 0° - 7.5°
Suggested Activities: Short naps, Rest breaks
Diagram Description: A figure is shown in a fully reclined chair position with the legrest at a 0°-7.5° incline.
Distance Adjustment
The distance between your Secretlab chair and Secretlab OTTO™ determines which area of your legs receives targeted support.
- Use the side grooves to gently lift and move the legrest to the desired position.
-
A. For support near the knees: Position the legrest closer to the chair.
Diagram Description: Figure shows legrest positioned closer to the chair for knee support, with a minimum 5 cm gap indicated between the seat base and legrest.
-
B. For support near the feet: Position the legrest farther from the chair.
Diagram Description: Figure shows legrest positioned farther from the chair for foot support, with a minimum 5 cm gap indicated between the seat base and legrest.
Tip: Maintain a minimum 5 cm gap between the seat base and legrest to relieve pressure and reduce discomfort behind the knees.
Stretching with the Secretlab OTTO™ Adjustable Legrest
With versatile adjustability in height, incline, and distance from chair, the Secretlab OTTO™ can help to stretch your legs while seated, especially your calves and hamstring region.
⚠️ Important: If you experience any discomfort or strain while performing these stretches, stop immediately.
Calf Stretch with Incline at 0°
- Sit slightly forward and away from the backrest while keeping your back straight.
- Fully extend one leg in front of you with your heel resting on the legrest's cushion edge. Keep your other foot flat on the ground.
- Gently lean your body forward and feel a stretch in your calf.
Hold for 15 - 30 seconds, then switch legs. Repeat 2 - 3 times with short breaks between sets.
Diagram Description: Figures illustrate the calf stretch. The legrest is at 0° incline. Steps show sitting forward, extending one leg with heel on the edge, and leaning forward.
Hamstring Stretch with Incline at 7.5° or 15°
- Sit slightly forward and away from the backrest while keeping your back straight.
- Fully extend one leg in front of you, resting both your calf and heel on the legrest. Keep your other foot flat on the ground.
- Slowly bend at the hips and reach toward your toes and feel a stretch in your hamstring.
Hold for 15 - 30 seconds, then switch legs. Repeat 2 - 3 times with short breaks between sets.
Diagram Description: Figures illustrate the hamstring stretch. The legrest is at 7.5° or 15° incline. Steps show sitting forward, extending one leg with calf and heel on the legrest, and bending at the hips.
Aftercare
Upholstery Care
The velour material is not water resistant and should not be washed. Follow the cleaning instructions below for proper maintenance.
- Connect the brush attachment ? to your vacuum and gently vacuum the pillow to remove dirt/dust and loose debris.
- Dampen a soft, clean cloth ? in cool water and gently dab at any stains. Do not rub the velour to avoid damaging it.
- If you wish, you can spray the pillow with a fabric-safe deodorizer ?.
Mechanical Components
Components such as the height and tilt mechanism should not require regular maintenance, as long as they are used as intended. Should you encounter any issues with these parts, please reach out to Secretlab for help. If your legrest is still within its warranty period, contact Secretlab to see if the issue is covered.
Technical Specifications
Feature | Specification |
---|---|
Height Adjustment Range | 8 cm (3.1") |
Minimum Height (From Floor) | 39 cm (15.4") |
Maximum Height (From Floor) | 47 cm (18.5") |
Tilt Adjustment Range | 0°, 7.5°, 15°, 22.5°, 30° |
Load Capacity | 60 kg (132.2 lbs) |
Pillow Top Dimensions | 49.5 x 40 cm (19.5 x 15.7") |
Need any help? For additional support and full warranty terms and conditions, please visit our website secretlab.co/support.
Note: The document mentions QR codes for accessing the manual in multiple languages but does not display them in the provided OCR text.
Important Safety Information
This user manual contains important safety regulations. Any non-conforming use may result in personal injury or mechanical damage. Please read this user manual carefully before use as it provides key information about safety, use, assembly and maintenance of the Secretlab OTTO™ Adjustable Legrest.
Ensure that you have received all parts according to the part checklist prior to installation. If any parts are missing or faulty, contact the Secretlab support team for replacements. The Secretlab OTTO™ Adjustable Legrest contains small items that could be a choking hazard if swallowed. Keep these items away from children and pets. Do not overtighten the screws during installation.
Place the legrest away from corrosive gas, water and dusty environment. Alteration or modding of any factory components outlined in the part checklist will automatically void your warranty.
- ⚠️ This legrest is not intended for use by children without adult supervision.
- ⚖️ Do not exceed the maximum load capacity stated for the legrest, 60 kg (132.2 lbs).
- ? Do not sit on the legrest.
- ? Do not stand on the legrest.
- ? This product is intended for indoor use only. Using this product outdoors could lead to product failure.
- ? Do not remove the red safety screw until the base is assembled.
To view this manual in the following languages, please scan the QR Code to the left.