Secretlab Chair Skins User Manual
Before you get started, a few pointers:
- Please ensure that your chair is free from visible dust or dirt before installation.
- Adjust your armrests horizontally to their most outward positions.
- Optional: Use a cloth iron on low heat to smooth out any minor creases in either sleeves before assembling.
BACKREST SLEEVE ASSEMBLY
Unzip the side and bottom zippers.
Slide the backrest sleeve over your chair and pull it down the seat's backrest.
[Diagram: A chair back with the sleeve being pulled down over it.]
Ensure holes on the backrest sleeve align with the lumbar knobs on the chair wings.
[Diagram: Close-up of the chair back showing alignment of sleeve holes with lumbar knobs.]
Once the backrest sleeve is securely on, zip down the zippers on either side of the backrest sleeve and adjust for a snug fit.
[Diagram: Side view of the chair back with zippers being closed.]
Incline the backrest all the way forward.
[Diagram: Side view of the chair tilted forward.]
Locate two straps at the base of the backrest sleeve. Route them through the gap between the seat's backrest and seat base, then tug gently to reinforce fit.
[Diagram: Underside view of the chair back showing straps being routed and pulled.]
Pull both straps upward and tuck them in.
[Diagram: Straps being pulled up and tucked.]
Connect the top and bottom zipper of the upper and lower backrest sleeve and zip close. If straps slip out, simply tuck them back upwards and continue zipping.
[Diagram: Zippers of the backrest sleeve being connected and closed.]
Adjust backrest sleeve for the best fit. Starting from the chair's side wings, lightly tug the sleeve inwards or outwards to align the seams and accents of the sleeve with the edges of your chair.
[Diagram: Person adjusting the fit of the backrest sleeve by tugging at the sides.]
SEAT BASE SLEEVE ASSEMBLY
Pull the seat base sleeve over the seat base and ensure general alignment.
[Diagram: Seat base sleeve being pulled over the chair seat.]
Once the seat base sleeve is on, slide in the sleeve inserts on the left and right sides of the seat base sleeve. Ensure they are securely slotted in.
Note: When installing the right sleeve insert, do not apply any pressure on or pull the recline lever to prevent accidentally adjusting the backrest.
Align the side of the sleeve insert with the side of the recline cover, then slide it in.
[Diagram: Close-up showing sleeve insert alignment with recline cover and insertion.]
Tuck the top of the sleeve insert into the gap between the seat base and recline cover.
[Diagram: Close-up showing the top of the sleeve insert being tucked into the gap.]
Incline the backrest all the way forward.
[Diagram: Side view of the chair tilted forward.]
Slide seat base sleeve through the gap between the backrest and base. Gently tug the quick-release buckles to ensure a better fit.
[Diagram: Seat base sleeve being threaded through the chair frame, with straps being tugged.]
Clip and secure quick-release buckles below the seat base and ensure that the straps are placed above the tilt levers.
[Diagram: Underside view showing buckles being clipped. Includes visual cues for correct (checkmark) and incorrect (cross) strap placement relative to tilt levers.]
Adjust seat base sleeve for the best fit. Lightly tug the sleeve inwards or outwards to align the seams and accents of the sleeve with the edges of your chair.
[Diagram: Person adjusting the fit of the seat base sleeve by tugging at the sides.]
DISASSEMBLY GUIDE
BACKREST SLEEVE DISASSEMBLY
- Unzip the zippers located on the back of the backrest (bottom, left, right).
- Pull and remove the backrest sleeve from the chair.
SEAT BASE SLEEVE DISASSEMBLY
- Unclip the quick-release buckles below the seat base.
- Use one hand to press down on and grip fabric located closest to the sleeve inserts. Use another hand to remove the sleeve inserts from the seat base. Remove the seat base sleeve off your chair.
AFTERCARE GUIDE
Cleaning and maintaining your Secretlab Chair Skins is quick and easy. Improper use and installation can damage your chair sleeves (backrest and seat base). Follow the usage and installation instructions to keep them in great condition for a long time. Any form of moisture is detrimental to the upholstery. Should there be any spills on your chair sleeves, remove them immediately to prevent liquid from seeping onto your chair. ? Remove any visible dust before washing by using a vacuum cleaner or gently brushing with a dry microfiber cloth. Refer to the Washing Directions for detailed washing instructions. ? Even the toughest of chair skins won't be able to stand up to rough usage. Avoid stretching the fabric excessively when installing the individual backrest and seat base sleeves. ⚠️Follow the usage and installation instructions
Keep away from liquids
Easy cleaning
Don't abuse it
WASHING DIRECTIONS
- 30°C ? Machine wash cold, gentle or delicate
- ? (inside out) Wash inside out
- Zipper ? Close zippers before washing
- ? (low heat) Tumble dry low
- ♨️ (low heat) Iron low heat
- ❌♨️ Do not iron on decoration
- ❌? Do not dry bleach
- ❌? Do not bleach
- ?❌ Do not mix with other laundry
- ?? Do not wring
NEED ANY HELP?
For additional support and full warranty terms and conditions, please visit our website:
Customer support | Secretlab US
