Product Overview
The ZEALOT S-67 is a portable Bluetooth speaker. It features a control panel on top and various ports for connectivity.
Control Panel Buttons:
Ports:
1. Turn On/Turn Off
- Long press the ⏻ Power button for 3 seconds: A "Dī dū" prompt sound indicates power on/off.
- Long press the ⏻ Power button for 8 seconds: Resets shutdown.
2. Function Introduction
Mode Switching Order:
| Mode | Description |
|---|---|
| Bluetooth mode → TF card mode → AUX mode | Switch mode by pressing and holding the "M" button. The "M" button requires 2 or more modes to switch. When switching between TF card and AUX mode, the last inserted media will be prioritized by default. |
Working Indicator Light (Blue) Status (Bluetooth mode, TF card / USB flash disk mode):
| Status | Indicator Light Behavior |
|---|---|
| Play | Constantly bright |
| Pause | Flicker |
2.1 Bluetooth
2.1.1 Bluetooth Connection
- Power on the speaker. The blue indicator flashes with the voice prompt "BLUETOOTH", indicating the speaker has entered pairing mode.
- Select "ZEALOT-S67" on your Bluetooth device (e.g., cell phone) and click to connect. Upon hearing two prompt sounds and the blue indicator becoming steady, the speaker and device are successfully connected.
Notices:
- If a "Pairing failed" message appears (e.g., "Please confirm ZEALOT-S67 is turned on, and it is in communication mode, and is ready to pair."), ignore "ZEALOT-S67" on your iPhone's Bluetooth devices list and restart the Bluetooth connection.
- When reconnecting with an iPhone, ensure the ZEALOT-S67 is powered off. Turn on Bluetooth on your phone before starting up the ZEALOT-S67 to avoid initial connection issues.
Reconnection:
- Restarting the speaker will automatically connect it to the last paired cell phone or other Bluetooth devices.
- If connection fails, check your phone's Bluetooth settings to ensure Bluetooth is turned on.
- For iOS devices, Bluetooth should be turned on in advance for the speaker to automatically connect. Otherwise, manual selection of "ZEALOT-S67" may be required.
2.1.2 TWS Connect (True Wireless Stereo)
When two ZEALOT S-67 speakers are turned on and within 10 meters, click the ☍ Stereo button on either speaker to connect them. After the first successful connection, subsequent connections will be automatic.
2.1.3 Bluetooth Call
| Action | Button Press |
|---|---|
| Answer/Hang up | Tap the ▶ Play/Pause button |
| Reject | Press and hold the ▶ Play/Pause button |
| Call back last number | Double-tap the ▶ Play/Pause button |
2.1.4 Bluetooth Play
Open the music player on your device to play music in Bluetooth state.
The operation for TF card and U disk modes is the same.
2.2 Data Transmission and USB Audio Function
A USB data cable can be used to charge the speaker when it is powered off. To use the speaker for data transmission, connect it to a computer while powered on. Insert a TF card. Once the computer identifies the mobile USB and hard disk, you can copy files.
2.3 Equalizer Function
Press the EQ button to cycle through equalizer modes:
- Click once: Vocal mode (green light flashes twice, then stays on).
- Click twice: Subwoofer mode (orange light flashes twice, then stays on).
- Click thrice: Normal mode (blue light flashes twice, then stays on).
2.4 USB Mode
Insert a U disk (USB flash drive) into the USB port. Upon hearing the prompt tone "USB", songs on the disk will begin to play.
2.5 TF Card Mode
Insert a TF card into the TF card slot. Upon hearing the prompt tone "TF Card", songs on the card will begin to play.
2.6 AUX Mode
Connect an audio cable to the AUX port. The speaker will switch to AUX mode after hearing the warning tone "AUX".
3. Charging
- When the battery voltage is low, a voice prompt "Low battery, please charge" will be heard. The power state of the Bluetooth speaker can also be viewed on a connected phone.
- Plug a Micro USB charging cable into the speaker and the other end into an adapter or computer USB port. A red indicator light will be on during charging and will turn off when fully charged.
- Charging time may vary depending on the adapter and computer USB charging port used.
4. Specification
Input Voltage: DC5V
Transmission Range: 10m
SNR: >95dB
Working Voltage: 7.4V
Dimensions: 297*133*130mm
Driver: 4 Ω
Frequency Response: 80Hz-20KHz
Distortion: <1%
Weight: 1956g
5. Notice
- Ensure the charger model is suitable for this product before charging.
- Do not submerge the speaker in water.
- Avoid extreme temperatures.
- Improper disassembly or modification without professional skills may cause unknown damage or even explosion. Such damage is not covered by the warranty.
Tips:
Keep the speaker and mobile phone within a 10-meter working range for optimal performance.
