ZEALOT PT01 Wireless Speaker

Quick Start Guide

Power On/Off

Press the [ON/OFF] button to turn the speaker on or off.

Battery Indicator

80%-100% Charge: Green indicator light is on.
40%-70% Charge: Yellow indicator light is on.
≤ 30% Charge: Red indicator light is on.

Wireless Connection

Connect your device to the speaker via Bluetooth. The speaker supports wireless audio streaming.

Mode Switch

Use the mode switch button to cycle through available modes.

Play Control

Basic playback controls (play, pause, skip) are available.

PartyAdd (Stereo Connection)

Connect multiple ZEALOT PT01 speakers for an enhanced audio experience:

Turn on a speaker, connect it to your device, and click the dual pairing button. You will hear a prompt tone.
Turn on the second speaker, click the dual pairing button. A prompt tone indicates successful connection to the first speaker.
Repeat step 2 to connect additional speakers (up to N speakers) to the first speaker. All connected speakers can play music simultaneously.

Light Mode

Control the speaker's lighting effects using the Light Switch and Light ON/OFF buttons.

Equalizer

Select different sound modes: Bass, Vocal, or Normal.

Charge

Connect a USB-C cable to the USB-C port for charging.

Technical Specifications

Feature	Specification
Wireless Version	5.4
Charging Voltage	DC 5V
Working Voltage	7.4V
Transmission Distance	10m
Frequency Range	20Hz-20KHz
Speaker Diameter	Φ79mm
SNR (Signal-to-Noise Ratio)	>96dB
Distortion	≤1%
Weight	1.3kg
Size	143×122×145mm

Packing Content

Standard Battery x1
User Manual x1

Warnings and Precautions

To ensure correct use and trouble-free operation, please read this user manual carefully first.

For the first use, it is recommended to fully charge the product.
Use and store the product at room temperature.
Do not expose the product to fire, high temperature, or direct sunlight.
Keep the speaker volume moderate to avoid temporary or permanent hearing impairment.
Do not use organic solvents or other chemicals to clean the product.
Do not allow small particles to enter the product.
Do not disassemble the product or make any modifications to its structure or parts.
If the battery is not replaced correctly, there is a risk of explosion; only replace with the same battery type.
The battery must not be exposed to sunlight, fire, or similar overheating conditions.
Do not throw or drop the product to avoid damage.

Compliance Information

FCC Caution: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement and can be used in portable exposure condition without restriction.

FCC ID: 2AFKR-ZEALOT-PT01

CCC Certification: If consumers use a power adapter to charge, they should purchase a matching set of CCC certification and meet the standards required for the power adapter.

Charger Power Requirement: The power delivered by the charger must be between a minimum of [7.5] Watts required by the radio equipment, and a maximum of [15] Watts to achieve the maximum charging speed.

	FCC Declaration for Shenzhen Zealot Wireless Speakers - Model Series 2AFKR-S46 Official FCC declaration from Shenzhen Zealot Digital Technology Co., Ltd. confirming product consistency across a wide range of wireless speaker models, all sharing identical hardware and software under FCC ID 2AFKR-S46.
	FCC RF Exposure Evaluation for ZEALOT-S49 Wireless Speaker This document details the FCC RF exposure evaluation for the ZEALOT-S49 wireless speaker and its related models, outlining product specifications, evaluation methods, and compliance with RF exposure limits for portable devices.
	ZEALOT FCC Attestation Letter for Model Series 2AFKR-S46 Attestation letter from SHENZHEN ZEALOT DIGITAL TECHNOLOGY CO., LTD for FCC certification of equipment with FCC ID 2AFKR-S46, listing multiple ZEALOT model names.
	SHENZHEN ZEALOT DIGITAL TECHNOLOGY CO., LTD Wireless Speaker Test Report This document details the test results for the ZEALOT Wireless Speaker (Model: ZEALOT-M1) conducted by Shenzhen Bangce Testing Technology Co., Ltd. according to 47 CFR Part 15.247 standards.
	SHENZHEN ZEALOT DIGITAL TECHNOLOGY CO., LTD - Declaration of Model Differences for Wireless Speakers Declaration of model differences for various ZEALOT wireless speaker models including ZEALOT-M1, ZEALOT-S1, ZEALOT-S32, ZEALOT-S32pro, ZEALOT-S49, ZEALOT-S49pro, ZEALOT-S85, ZEALOT-S89, ZEALOT-S87, ZEALOT-ZE21, ZEALOT-S53, ZEALOT-S79, ZEALOT-S76, ZEALOT-P12, ZEALOT-S66, ZEALOT-S97, and ZEALOT-S98. This document confirms that these models are electrically identical, sharing the same schematic, PCB layout, structure, and software, with differences limited to sales channels and model names.
	ZEALOT Wireless Speaker Model Equivalence FCC Declaration SHENZHEN ZEALOT DIGITAL TECHNOLOGY CO., LTD declares that various ZEALOT wireless speaker models share identical internal components, differing only in external appearance for marketing purposes, as submitted to the FCC.
	ZEALOT-PT02 Wireless Speaker Quick Start Guide This document provides a quick start guide for the ZEALOT-PT02 wireless speaker, detailing its technical specifications, features, operation, safety warnings, and compliance information in multiple languages, with English as the primary language.
	RF Exposure Evaluation for ZEALOT-M1 Wireless Speaker This document details the RF exposure evaluation for the ZEALOT-M1 Wireless Speaker, confirming compliance with FCC regulations and SAR test exclusion criteria based on conducted power and separation distances.