Goodman GPG 16 SEER "M" Series Installation Manual

Introduction

This document provides essential installation instructions for the Goodman GPG 16 SEER "M" Series Single Package Gas-Electric Heating & Cooling Units, covering models from 2 to 4 Tons. It is crucial for installing personnel to thoroughly familiarize themselves with this manual and all safety warnings prior to installation or repair.

Proper installation, adjustment, servicing, and repair must only be performed by trained and qualified personnel. Failure to adhere to these guidelines can result in product damage, property damage, personal injury, or death.

Key Information & Safety

• Safety First: Always observe safety warnings and recognize symbols indicating precautions.
• Trained Personnel Required: Only individuals trained in the installation, adjustment, service, or repair of this equipment should perform such tasks.
• ENERGY STAR® Compliance: This product is designed to meet ENERGY STAR® criteria for energy efficiency when matched with appropriate coil components. Proper refrigerant charge and airflow are critical for optimal performance.
• Installation Standards: Installation must comply with all local building codes and ordinances, and where applicable, the latest edition of the National Fuel Gas Code (NFPA 54/ANSI Z223.1) and the National Standard of Canada (CAN/CSA B149).
• Manufacturer Information: For detailed specifications and further information, please consult the product specification sheets available at www.goodmanmfg.com.