Soundcore Mini 3: At a Glance
At a Glance
The Soundcore Mini 3 is a compact portable Bluetooth speaker. The diagram shows the front and back views with numbered components.
| Number | Component |
|---|---|
| 1 | Power LED |
| 2 | Power button |
| 3 | Volume down button |
| 4 | Multi-function button |
| 5 | Volume up button |
| 6 | Bluetooth/PartyCast button |
| 7 | Bluetooth/PartyCast LED |
| 8 | Microphone |
| 9 | USB-C charging port |
Charging
- Use the provided USB-C cable to prevent any damage.
- Fully charge this speaker before the first use to prolong the lifespan of the built-in battery.
- Disconnect this speaker from the charger when fully charged. Do not charge for extended periods.
Charging status indicators:
- ● Flashing red: Low battery
- ● Steady red: Being charged
- ● Steady white: Fully charged
Powering On/Off
To power on or off, press and hold the power button for 2 seconds.
This speaker will power off automatically 30 minutes after no audio input or button inactivity.
Using your Soundcore Mini 3
Bluetooth Mode
With this speaker, you can enjoy music through your Bluetooth-enabled devices.
To enter Bluetooth pairing mode, press the Bluetooth button. The LED will flash blue. Once connected, the LED will be steady blue.
| Indicator | Status |
|---|---|
| Flashing blue | Bluetooth pairing |
| Steady blue | Bluetooth connected |
- Dual Bluetooth Connection: This speaker can pair up to 2 mobile devices via Bluetooth. To pair with another device, press the Bluetooth button to re-enter Bluetooth pairing mode.
- This speaker can only play music on one mobile device at a time. To play from another connected device, pause the currently active device first.
- Each time you power on your Soundcore speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the Bluetooth button to enter Bluetooth pairing mode.
PartyCast Mode
You can wirelessly connect up to 100 identical Soundcore Mini 3 speakers together.
- Connect one Soundcore Mini 3 speaker with your smartphone or tablet as the primary speaker.
- Press and hold the Bluetooth button on the primary speaker and all desired speakers to enter pairing mode.
When successfully connected, the Bluetooth LED on the primary speaker will continue flashing white, while on the secondary speakers will turn white.
Switching Speakers in PartyCast Mode:
- Any secondary speaker can be switched to become the primary speaker by pressing the Bluetooth button twice and connecting to your smartphone.
- Any primary speaker can be switched to become the secondary speaker by pressing the Bluetooth button twice and searching for an available primary speaker.
- To exit the PartyCast mode, press and hold the Bluetooth button on any speaker for 2 seconds.
Button Controls
| Action | Button | Function |
|---|---|---|
| Press | Multi-function | Play/Pause |
| Press twice | Multi-function | Next track |
| Press thrice | Multi-function | Previous track |
| Press | Volume Up/Down | Adjust volume |
| Press | Multi-function | Answer/End a call |
| Press and hold for 2 seconds | Multi-function | Answer a second incoming call and put the current call on hold |
| Press and hold for 2 seconds | Multi-function | Reject an incoming call |
| Press and hold for 2 seconds | Bluetooth/PartyCast | Switch between a call on hold and an active call |
| Press and hold for 2 seconds | Multi-function | Activate Siri or other voice assistant software |
Soundcore App
Download the Soundcore App for an enhanced product experience. Features include:
- Check product information
- Update firmware
- Indicate battery status
- Switch BassUp mode
- Remotely control the volume and play/pause
Available on:
Get it on Google Play (Google Play and the Google Play logo are trademarks of Google Inc.)
Download on the App Store (Apple and the Apple logo are trademarks of Apple Inc.)
Specifications
Specifications are subject to change without notice.
| Feature | Details |
|---|---|
| DC power input | 5V = 1A |
| Battery capacity | 1800 mAh / 3.7 V |
| Audio output power | 6 W |
| Charging time | 2-3 hours |
| Playtime (varies by volume level and music content) | Up to 15 hours |
| Waterproof level | IPX7 |
| Bluetooth version | 5.0 |
| Bluetooth range | 20 m / 66 ft |
Serial Number (SN) Code Explanation
Note: The 'x' of SN Code: XXXXXXXXXXXXXXXX is a variable. See the table below.
| Variable 'x' | Range of variable | Content |
|---|---|---|
| Seventh | 0-9 or A-F | Denotes the hardware version which is not affected on the safety compliance. |
| Eighth | 8,9,A,B,C... | Denotes the year, 8 means 2018, 9 means 2019, A means 2020, B means 2021, C means 2022, and so on. |
| Ninth and tenth | 01,02,03... | Denotes weeks, 01 means the first week in this year, 02 means the secondary week in this year, and so on. |
| Eleventh | 1-7 | Denotes date, 1 means Monday, 2 means Tuesday..., 7 means Sunday and so on. |
| The last five | 00001-99999 | Denotes serial No. |
Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website: https://uk.soundcore.com/pages/psti-related.
Additional Specifications
- Power consumption in standby mode: ≤0.5W
- Power management: ≤ 20min
Applicable Adapter Information
- Brand: ANKER
- Manufacturer: Anker Innovations Limited
- Model: A2337
- Input: 100-240V~ 1.0A, 50-60Hz
- Output: 5.0V = 3.0A 15.0W / 9.0V = 3.0A 27.0W / 12.0V = 2.5A 30.0W / 15.0V = 2.0A 30.0W / 20.0V = 1.5A 30.0W (30.0W Max)
Port Description
Default Open Port: Classic Bluetooth. After the device is powered on, Classic Bluetooth visibility (or pairing mode) is automatically enabled, providing Bluetooth pairing (or control) services. The Bluetooth service is disabled when the device is powered off.
SOUNDCORE - Passport
