Anker Soundcore Glow Mini Portable Bluetooth Speaker
At a Glance
The Soundcore Glow Mini features a compact design with accessible controls and indicators.
Top View / Front View:
Side View / Back View:
- [Bluetooth LED]
- [USB-C Charging Port]
- [Strap]
- [Power LED]
Charging Your Speaker
Use a certified USB-C cable and charger to prevent any damage.
Charging Indicators:
| Indicator Status | Meaning |
|---|---|
| Flashing Red | Low Battery |
| Steady Red | Being Charged |
| Steady White | Fully Charged |
Powering On / Off
To Power On: Press the [Power Button]. The speaker will emit a steady white light.
To Power Off: Press and hold the [Power Button] for 2 seconds. The speaker will emit a light off indication.
The speaker will power off automatically after 20 minutes if no device is connected.
Using Your Speaker
Bluetooth Mode
To enter Bluetooth pairing mode, press the [Bluetooth Button]. The [Bluetooth LED] will flash blue. Then, select "soundcore Glow Mini" from your device's Bluetooth list to connect. The [Bluetooth LED] will turn steady blue upon successful connection.
Notes:
- To re-enter Bluetooth pairing mode, press the [Bluetooth Button] once.
- This speaker can only play music on one mobile device at a time. To play from another connected device, pause the device that's currently active first.
- Each time you power on your speaker, it will automatically connect to your last connected device if available within the Bluetooth range. If not, press the [Bluetooth Button] to enter Bluetooth pairing mode.
TWS (True Wireless Stereo) Mode
Two identical soundcore speakers can pair with each other for stereo sound. Both speakers can play the same audio (one as the left channel and the other as the right channel).
With one speaker connected to a smartphone, press and hold the [Bluetooth Button] for 2 seconds on two speakers to enter TWS pairing mode. The [Bluetooth LED] on both speakers will flash white during pairing.
TWS Status:
| Indicator Status | Meaning |
|---|---|
| Flashing White | TWS Pairing |
| Steady Blue (Speaker 1) | TWS Connected (Left Channel) |
| Steady White (Speaker 2) | TWS Connected (Right Channel) |
To exit TWS mode, press and hold the [Bluetooth Button] for at least 2 seconds.
PartyCast Mode
With one speaker connected to a smartphone, press the [PartyCast Button] on up to 100 soundcore speakers with PartyCast function to synchronize audio and light.
PartyCast Status:
| Indicator Status | Meaning |
|---|---|
| Flashing White | PartyCast Pairing |
| Steady White | PartyCast Connected |
Soundcore speakers with PartyCast function can also be connected with this speaker.
Light Modes
The light on the speaker changes with the rhythm of the music. There are 5 preset music-sync light modes. You can also check all available light modes in the soundcore app.
- To switch light modes: Press the [Light Effect Button].
- To turn off the light: Press and hold the [Light Effect Button] for 2 seconds.
Button Controls
| Button | Action | Function |
|---|---|---|
| [Power Button] | Press | Power On |
| Press and Hold for 2 Seconds | Power Off | |
| Multi-function Button (Play/Pause) | Press | Play / Pause |
| Press Twice | Next Track | |
| Press Three Times | Previous Track | |
| Call Button (integrated with Multi-function) | Press | Answer/End a Call |
| Press and Hold for 2 Seconds | Reject a Call | |
| [Bluetooth Button] | Press | Enter Bluetooth Pairing Mode |
| Press and Hold for 2 Seconds | Enter / Exit TWS Pairing Mode | |
| [Light Effect Button] | Press | Switch Light Modes |
| Press and Hold for 2 Seconds | Turn off Light | |
| Volume Buttons ([-/+]) | Press | Volume Up / Down |
| Press and Hold for 2 Seconds | Enter / Exit PartyCast Pairing Mode |
soundcore App
Download the soundcore app to enhance your experience.
[Get it on Google Play]
[Download on the App Store]
App Features:
- Product information: Check the product name and software version, or read the user guide.
- Firmware update: You will be informed once a new version of firmware is detected when you connect the speaker with the app.
- Battery status: Indicates the remaining battery level of your speaker.
- Volume control: Adjust the volume level via the app without pressing the buttons on the speaker.
- EQ settings: There are 4 preset EQ settings you can choose from in the app to optimize your experience while enjoying different music genres.
- soundcore Signature: Standard EQ mode optimized for well-balanced sound.
- Voice: Voices stand out more clearly from other ambient sounds.
- Balance: No enhancement for high-frequency and low-frequency sounds.
- Treble Boost: High frequencies are enhanced.
Additional Features
- Set auto-power off time: Set an auto-power off time. The speaker will automatically turn off when the time is up.
- Light effects: Besides the music-sync light effects, you can also choose your favorite light effects.
- Voice prompt: Mute or restore the voice prompt while powering on/off.
Reset
Press and hold the [Bluetooth Button] and [Volume Up Button] simultaneously for at least 4 seconds to reset the speaker.
Specifications
| Attribute | Value |
|---|---|
| DC Power Input | 5V ⎓ 1A |
| Battery Capacity | 1800mAh/3.7V |
| Audio Output Power | 8W |
| Speaker Driver | 1.75" Full Range x1 |
| Charging Time | 3 Hours |
| Play Time (varies by volume level and music content) | Up to 12 Hours |
| Waterproof Level | IP67 |
| Bluetooth Version | 5.3 |
| Bluetooth Range | 100m / 328ft |
Serial Number (SN) Code Information
Note: The 'x' of SN Code: xxxxxxxxxxxxxxxx is a variable, see below table.
| Variable 'x' | Range of variable | Content |
|---|---|---|
| Seventh | 0-9 or A-F | Denotes the hardware version which is not effected on the safety compliance. |
| Eighth | 8,9,A,B,C... | Denotes the year, 8 means 2018, 9 means 2019, A means 2020, B means 2021, C means 2022, and so on. |
| Ninth and tenth | 01,02,03... | Denotes weeks, 01 means the first week in this year, 02 means the secondary week in this year, and so on. |
| Eleventh | 1-7 | Denotes date, 1 means Monday, 2 means Tuesday..., 7 means Sunday and so on. |
| The last five | 00001-99999 | Denotes serial No. |
Compliance
Hereby, Anker Innovations Limited declares that this device is in compliance with The Product Security and Telecommunications Infrastructure (Security Requirements for Relevant Connectable Products) Regulations 2023. For the Statement of Compliance, visit the website: https://uk.soundcore.com/pages/psti-related.
