HG 1/144 Gundam Astaroth Assembly Instructions
Official Assembly Manual and Color Guide
Product Overview
The HG 1/144 Gundam Astaroth is a model kit based on the mobile suit from the Mobile Suit Gundam: Iron-Blooded Orphans series. It features the characteristic Gundam Frame and two Ahab Reactors. The design shares similarities with other Gundam Frame machines like Barbatos, Kimaris, and Gusion, but incorporates special energy transmission mechanisms. This specific equipment was intended for the Astaroth but was lost when it left the Warren family.
Key equipment includes the Demolition Knife, a large close-combat weapon with a folding mechanism, and the Boost Armor, which aids in posture control due to the Astaroth's asymmetrical design and houses a hidden knife. It also comes with a Rifle that was maintained during its time with the Warren family.
The model kit also includes detailed instructions for assembly and a color guide for painting the mobile suit to match its in-universe appearance.
Safety Precautions and Preparation
Warning
- Contains small parts. Risk of ingestion and suffocation, do not give to children under 3 years old.
Caution
- Be careful as there are sharp edges.
- Be careful as there are pointed tips.
- Cut out parts cleanly and discard the scraps.
- Do not put the bag over your head or cover your face. There is a risk of suffocation.
Precautions for Assembly
- Read the instructions carefully before assembling.
- Confirm part numbers and cut them out cleanly with nippers, etc.
- We recommend using safer "water-based paints" for painting.
- Please be very careful when assembling, especially when touching pointed tips or thin edges.
- PC parts are made of soft material; check the marks used during assembly and create parts in the specified quantities.
- Assemble parts in the specified quantities.
- Select one and attach.
- Attach identical parts on both sides.
- Pay attention to the direction and shape of the parts.
- Please assemble.
Color Guide
For a more realistic finish, please refer to these basic colors.
We recommend using safer "water-based paints" for painting.
Color formulations are reference values; colors may differ from the images.
| Main Body White Part | White (100%) + Gray (small amount) |
|---|---|
| Main Body Blue Part | Indi Blue (60%) + White (40%) + Blue (small amount) |
| Main Body Red Part | Monza Red (100%) |
| Frame Gray Part | Mahogany (45%) + White (25%) + Black (20%) + Khaki (10%) |
| Toe Black Part | Black (100%) + White (small amount) |
| Main Camera Light Green Part | White (50%) + Light Blue (30%) + Emerald Green (20%) |
| Sensor Green Part | Yellow Green (50%) + White (25%) + Yellow (25%) |
| Rifle Dark Gray Part | Black (70%) + White (30%) |
| Knife Blade Light Gray Part | Gray (65%) + White (35%) |
Assembly Steps
1. Body Assembly
Diagrams show the assembly of the main body unit. This involves connecting parts like A1, A2, B, C, D, and PC parts. Pay close attention to the orientation of parts and the order of assembly as indicated by the illustrations.
Key parts involved: A1, A2, B, C, D, PC parts.
Diagrams illustrate connecting various plastic components, including specific part numbers and indicating orientation changes.
2. Head Assembly
Diagrams illustrate the assembly of the head unit. This step involves connecting parts such as B20, E0, D14, and applying stickers. Ensure correct part orientation and secure attachment.
Key parts involved: B20, E0, D14, PC parts, Stickers.
Diagrams show the process of assembling the head, including attaching small components and applying decals.
3. Right Arm Assembly
Diagrams detail the assembly of the right arm. This includes connecting parts like A10, B9, B1, and B2. Attention to part orientation is crucial for correct assembly.
Key parts involved: A10, B9, B1, B2, A1, A10, A10, A10, B9, A10, B1, B2.
Illustrations guide the connection of multiple parts to form the right arm, with specific callouts for orientation.
4. Left Arm Assembly
Diagrams show the assembly of the left arm, mirroring the process for the right arm. Parts such as A10, C7, C11, C12, C14, and C20 are used. Ensure correct part orientation.
Key parts involved: A10, C7, C11, C12, C14, C20, A1, A10, C7, A10, C11, C12, C14, C20, A10, C20.
The assembly process for the left arm is depicted, involving similar part types and connection methods as the right arm.
5. Foot Assembly
Diagrams illustrate the assembly of the foot units. This step involves connecting parts like C2, C3, C1, and PC parts. Ensure correct part orientation and secure attachment.
Key parts involved: C2, C3, C1, PC parts.
Illustrations guide the assembly of the foot components.
6. Right Leg Assembly
Diagrams show the assembly of the right leg. This involves connecting parts such as A10, A1, B26, B29, and D6. Pay close attention to the orientation of parts.
Key parts involved: A10, A1, B26, B29, D6.
The assembly of the right leg is detailed, showing the connection of various parts to form the leg structure.
7. Left Leg Assembly
Diagrams illustrate the assembly of the left leg, similar to the right leg. Parts such as B28, B24, E3, B10, and PC7 are used. Ensure correct part orientation.
Key parts involved: B28, B24, E3, B10, PC7, B1, B28, B24, E3, B10, PC7, B1.
The assembly process for the left leg is depicted, involving similar part types and connection methods as the right leg.
8. Waist Assembly
Diagrams show the assembly of the waist unit. This involves connecting parts like A2, D7, D24, B8, B3, B1, C5, and PC0. Pay close attention to part orientation.
Key parts involved: A2, D7, D24, B8, B3, B1, C5, PC0.
Illustrations guide the connection of multiple parts to form the waist section.
9. Boost Armor Assembly
Diagrams illustrate the assembly of the Boost Armor. Parts such as B16, B5, B7, B6, and stickers are used. Ensure correct part orientation and secure attachment.
Key parts involved: B16, B5, B7, B6, Stickers.
The assembly of the Boost Armor components is depicted.
10. Backpack Assembly
Diagrams show the assembly of the backpack unit. Parts such as D23, D22, D20, D26, and D0A are used. Pay attention to part orientation.
Key parts involved: D23, D22, D20, D26, D0A, D0A, D20, D26, D0A.
Illustrations guide the connection of various parts to form the backpack.
11. Arm Subknuckle Assembly
Diagrams detail the assembly of the arm subknuckle. Parts such as D24, D20, D17, and D16 are used. The text notes compatibility with Bandai Action Base 2 (sold separately).
Key parts involved: D24, D20, D17, D16.
The assembly of the arm subknuckle is shown, with a note about accessory compatibility.
12. Weapon Assembly
Diagrams show the assembly of the rifle and other weapons. This involves connecting parts like D0, D3, D13, D7, D2, D8, D1, and D25. The instructions mention disassembling the wrist to attach the weapon and that the weapon can be held by either hand.
Key parts involved: D0, D3, D13, D7, D2, D8, D1, D25.
Illustrations guide the assembly of the rifle, including connecting multiple segments and attaching it to the mobile suit's hand.
How to Order Parts
If any parts are defective or missing, please write the product name, part number, and description of the defect to the Shizuoka Consultation Center (〒420-8681 Shizuoka City, Aoi-ku, Naganuma 500-12, Bandai Co., Ltd. Shizuoka Consultation Center). You can also order parts if you have lost or broken them.
How to Order Parts:
- Write the order details on the Parts Order Card (e.g., A-1x1, C-1x2, Foil Sticker x1). Some parts may be sold by runner (frame) unit.
- Prepare payment: Combine part cost + shipping cost. Use postal money orders for amounts in hundreds of yen and stamps for amounts less than one hundred yen. Postal money orders can be obtained at post office counters.
- Send the Parts Order Card and payment in an envelope to the Consultation Center below. Phone orders are not accepted.
Contact Information: TEL: 054-208-7520 (Reception hours: Monday-Friday (excluding holidays) 10:00-16:00)
For more information, visit the Bandai Hobby Site: http://bandai-hobby.net/site/index.html
Information on mail-order methods is also available via an automated voice guide (24 hours): TEL: 054-208-7537.
Estimated Costs (for reference):
- Parts: ¥80 per piece
- Foil Stickers: ¥40
- Instruction Manual: ¥40
- Shipping (estimated): ¥140 (Foil Stickers/Manual), ¥120 (approx. 5 parts), ¥140 (approx. 15 parts), ¥250 (approx. 25 parts), ¥205 (approx. 50 parts).
The personal information provided will only be used for parts shipping and information provision. Changes, cancellations, or returns after ordering are not accepted. Orders may be returned if parts are out of stock. Costs such as money order fees are the customer's responsibility. Part prices and shipping costs are subject to change without notice. Postal rates may also change.
