TownGuide Performer

BDP100 LED50/740 II DS PCF SI LS-6 62P

TOWNGUIDE PERF FLAT CONE, LED module 5000 lm, Distribution symmetrical, Polycarbonate bowl/cover frosted, LumiStep dimming 6 hours, Post-top for diameter 62 mm

Product Overview

The TownGuide Performer family offers six distinct, modern luminaire shapes: Flat Cone, Bowl, Classic Cone, Classic T, T, and Tzero. Each model is available with a clear (PCC), translucent (PCTR), or frosted (PCF) bowl, with the exception of the Tzero which is only offered with a clear bowl. The range supports various lumen packages and LED light sources in neutral white or warm white, complemented by dedicated optics for lower mounting heights, ensuring optimal selection for specific project needs. These luminaires boast a long life expectancy of 100,000 operating hours. Furthermore, the TownGuide Performer integrates seamlessly with smart energy-reduction programs through various control system options, including LumiStep, DynaDimmer, and LineSwitch for standalone dimming, and Coded Mains for group control. Remote connectivity is available via Interact lighting management software. Installation is simplified by a bayonet whistle connector with an integrated gland in the spigot, eliminating the need to open the luminaire. The Signify Service tag app provides direct access to all relevant data, facilitating easy maintenance. Philips has focused on optimizing the Total Cost of Ownership (TCO), offering significant energy and maintenance cost savings compared to conventional lighting solutions, due to its dedicated LED technology and compatibility with diverse control systems.

Product Data

General Information

Lamp family code	LED50 [LED module 5000 lm]
Light source replaceable	Yes
Number of gear units	1 unit
Driver included	Yes
Photocell	-

Technical Specifications

Light Source

Light source engine type	LED
Service tag	Yes
Product family code	BDP100 [TOWNGUIDE PERF FLAT CONE]
Lighting Technology	LED
Value ladder	Performance
Embedded control	LumiStep dimming 6 hours
CE mark	Yes
Warranty period	5 years
Flammability mark	ENEC mark
ENEC mark	ENEC mark
Glow-wire test	Temperature 650 °C, duration 5 s
EU RoHS compliant	Yes
Serviceability class	Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts

Light Technical

Upward light output ratio	3
Luminous Flux	2,800 lm
Standard tilt angle posttop	0°
Standard tilt angle side entry	-
Correlated Color Temperature (Nom)	4000 K
Luminous Efficacy (rated) (Nom)	82 lm/W
Color rendering index (CRI)	70
Number of light sources	4
Light source color	740 neutral white
Optical cover type	Polycarbonate bowl/cover frosted
Luminaire light beam spread	75°
Optic type outdoor	Distribution symmetrical

Operating and Electrical

Input Voltage	220-240 V
Line Frequency	50 to 60 Hz
Inrush current	45 A
Inrush time	0.285 ms
Power Consumption	34 W
Power Factor (Fraction)	0.95
Connection	Screw connection block 5-pole
Cable	-
Number of products on MCB of 16 A type B	10

Temperature

Ambient temperature range	-40 to +35 °C

Controls and Dimming

Dimmable	Yes
Driver/power unit/transformer	Power supply unit with DynaDimmer
Control interface	-
Constant light output	No

Mechanical and Housing

Housing Material	Aluminum
Reflector material	Acrylate
Optic material	Polycarbonate
Optical cover material	Polycarbonate
Fixation material	Steel
Housing Color	Silver
Mounting device	Post-top for diameter 62 mm
Optical cover shape	Conical flat
Optical cover finish	Frosted
Overall length	570 mm
Overall width	570 mm
Overall height	209 mm
Overall diameter	570 mm
Effective projected area	0.051 m²
Dimensions (Height x Width x Depth)	209 x 570 x 570 mm
Parts color	All parts colored

Approval and Application

Ingress protection code	IP66 [Dust penetration-protected, jet-proof]
Mech. impact protection code	IK10 [20 J vandal-resistant]
Surge Protection (Common/Differential)	Luminaire surge protection level until 6 kV differential mode and 6 kV common mode
Sustainability rating	Lighting for circularity
Protection class IEC	Safety class II

Performance (IEC Compliant)

Initial Performance

Luminous flux tolerance	+/-7%
Initial chromaticity	(0.38, 0.38) SDCM <5
Power consumption tolerance	+/-10%
Init. Color Rendering Index Tolerance	+/-2

Over Time Performance

Driver failure rate at 5000 h	0.5 %
Control gear failure rate at median useful life 100000 h	10%
Lumen maintenance at median useful life* 100000 h	93%

Application Conditions

Performance ambient temperature Tq	25 °C
Maximum dim level	50%

Product Details

Order product name	BDP100 LED50/740 II DS PCF SI LS-6 62P
Full product name	BDP100 LED50/740 II DS PCF SI LS-6 62P
Full product code	871829191006000
Order code	910500991066
Material Nr. (12NC)	910500991066
Numerator - Quantity Per Pack	1
EAN/UPC - Product/Case	8718291910060
Numerator - Packs per outer box	1
EAN/UPC - Case	8718291910060

	Philips TownGuide Performer LED Luminaire Family Overview Explore the Philips TownGuide Performer family of LED luminaires, designed for modern urban and transportation lighting. This brochure details product shapes, features, technical specifications, applications, and performance data for various models.
	Philips TownGuide Performer: Public Lighting Luminaire Product Guide Explore the Philips TownGuide Performer, a versatile and energy-efficient LED luminaire family for urban public lighting. Discover its various shapes, lighting performance, application examples, smart control options, and technical specifications for creating vibrant and sustainable city environments.
	Philips TownGuide Performer BDP105 LED Streetlight Technical Datasheet Detailed technical datasheet for the Philips TownGuide Performer BDP105 LED streetlight, featuring 5000 lm, 830 Warmweiß color temperature, IP66 protection, and energy-saving capabilities for urban lighting.
	Philips TownGuide Performer BDP103 LED70/740 II DS PCC BK CLO 76P Outdoor Luminaire Discover the Philips TownGuide Performer BDP103, a versatile LED luminaire offering 7000 lm, 740 neutral white light, and advanced control options for efficient outdoor lighting. Features include a durable polycarbonate bowl, IP66/IK10 rating, and a 100,000-hour lifespan.
	Philips TownGuide Performer BDP102 LED Street Light - Technical Specifications and Features Detailed technical specifications and features of the Philips TownGuide Performer BDP102 LED street light, including product data, electrical information, control options, and mechanical details. Optimized for search engines.
	Philips Iridium gen4 LED Street Light BGP501/502 - Technical Specifications and Installation Guide Comprehensive guide to the Philips Iridium gen4 LED street light (BGP501/502), detailing technical specifications, dimensions, installation procedures, wiring diagrams, compatibility information, and safety guidelines.
	Philips LumiStreet gen2 BGP293 LED Luminaire - Technical Datasheet Comprehensive technical datasheet for the Philips LumiStreet gen2 BGP293 LED luminaire, detailing specifications, performance data, dimensions, and application information for modern street lighting.
	Philips LumiStreet gen2 BGP292 LED Street Light - Technical Datasheet Detailed technical specifications and data for the Philips LumiStreet gen2 BGP292 LED street light. This datasheet covers general characteristics, electrical specifications, performance metrics, lifetime data, materials, dimensions, photometric distribution, and logistics information for this high-efficiency outdoor luminaire.