Philips TownGuide Performer
Model: BDP103 LED70/740 II DS PCC BK CLO 76P
Product Overview
TOWNGUIDE PERF CLASSIC T, LED module 7000 lm, 740 neutral white, Safety class II, Distribution symmetrical, Polycarbonate bowl/cover clear, Black, Post-top for diameter 76 mm.
Product image description: A product image shows the Philips TownGuide Performer luminaire, a modern outdoor light fixture with a clear bowl and a dark-colored post.
The TownGuide Performer family comprises six distinct shapes: Flat Cone, Bowl, Classic Cone, Classic T, T, and Tzero. Each luminaire offers options for clear (PCC), translucent (PCTR), or frosted (PCF) bowls, with Tzero exclusively available with a clear bowl. Available with a wide range of lumen packages, neutral white or warm white LED light sources, and specialized optics for lower mounting heights, users can easily select the version best suited for their project requirements. These luminaires boast a long life expectancy of 100,000 operating hours and support various control system options for smart energy reduction, including LumiStep, DynaDimmer, and LineSwitch standalone dim control, as well as Coded Mains group control and seamless remote connectivity with Interact lighting management software. Installation is simplified by a bayonet connector with an integrated gland in the spigot, eliminating the need to open the luminaire. The Signify Service tag app provides direct access to all relevant data for easy maintenance. Philips has focused on optimizing the Total Cost of Ownership (TCO), offering significant energy and maintenance cost savings compared to conventional lighting.
Product Data
General Information
| Lamp family code | LED70 [LED module 7000 lm] |
| Light source replaceable | Yes |
| Number of gear units | 1 unit |
Light Technical
| Upward light output ratio | 3 |
| Luminous Flux | 5,250 lm |
| Standard tilt angle posttop | 0° |
| Standard tilt angle side entry | |
| Luminous Efficacy (rated) (Nom) | 115 lm/W |
| Correlated Color Temperature (Nom) | 4000 K |
| Color rendering index (CRI) | 70 |
| Light source color | 740 neutral white |
| Optical cover type | Polycarbonate bowl/cover clear |
| Luminaire light beam spread | 75° |
| Optic type outdoor | Distribution symmetrical |
Operating and Electrical
| Input Voltage | 220-240 V |
| Line Frequency | 50 to 60 Hz |
| Inrush current | 45 A |
| Inrush time | 0.285 ms |
| Power Consumption | 45.5 W |
| Power Factor (Fraction) | 0.97 |
| Connection | Screw connection block 5-pole |
| Cable | - |
| Number of products on MCB of 16 A type B | 10 |
Temperature
| Ambient temperature range | -40 to +35 °C |
Controls and Dimming
| Dimmable | No |
| Driver/power unit/transformer | Power supply unit regulating with constant light output |
| Control interface | Yes |
| Constant light output | Yes |
Mechanical and Housing
| Housing Material | Aluminum |
| Reflector material | Acrylate |
| Optic material | Polycarbonate |
| Optical cover material | Steel |
| Fixation material | Steel |
Approval and Application
| Driver included | Yes |
| Light source engine type | LED |
| Service tag | Yes |
| Product family code | BDP103 [TOWNGUIDE PERF CLASSIC T] |
| Lighting Technology | LED |
| Value ladder | Performance |
| Serviceability class | Class A, luminaire is equipped with serviceable parts (when applicable): LED board, driver, control units, surge protection device, optics, front cover and mechanical parts |
| Housing Color | Black |
| Mounting device | Post-top for diameter 76 mm |
| Optical cover shape | Wide |
| Optical cover finish | Clear |
| Overall height | 458 mm |
| Overall diameter | 570 mm |
| Effective projected area | 0.093 m² |
| Ingress protection code | IP66 [Dust penetration-protected, jet-proof] |
| Mech. impact protection code | IK10 [20 J vandal-resistant] |
| Surge Protection (Common/Differential) | Luminaire surge protection level until 6 kV differential mode and 6 kV common mode |
| Sustainability rating | Lighting for circularity |
| Protection class IEC | Safety class II |
| Flammability mark | Yes |
| CE mark | ENEC mark |
| ENEC mark | 5 years |
| Warranty period | Yes |
| EU RoHS compliant | Yes |
Initial Performance (IEC Compliant)
| Luminous flux tolerance | +/-7% |
| Initial chromaticity | (0.43, 0.40) SDCM <5 |
| Power consumption tolerance | +/-10% |
| Init. Color Rendering Index Tolerance | +/-2 |
| Standard Deviation of Colour Matching (McAdam ellipse) | SDCM≤5 |
Over Time Performance (IEC Compliant)
| Control gear failure rate at median useful life | 10% / 100000 h |
| Lumen maintenance at median useful life* | 93 / 100000 h |
Application Conditions
| Performance ambient temperature Tq | 25 °C |
| Maximum dim level | Not applicable |
Product Data
| Order product name | BDP103 LED70/740 II DS PCC BK CLO 76P |
| Full product name | BDP103 LED70/740 II DS PCC BK CLO 76P |
| Full product code | 871951465886800 |
| Order code | 910925868810 |
| Material Nr. (12NC) | 910925868810 |
| Numerator - Quantity Per Pack | 1 |
| Net Weight (Piece) | 7.480 kg |
| EAN/UPC - Product/Case | 8719514658868 |
| Numerator - Packs per outer box | 1 |
| EAN/UPC - Case | 8719514658868 |
Dimensional Drawing
Dimensional drawing description: The luminaire features a top diameter ranging from 48-76 mm, with a central measurement of 70 mm. The overall height is 458 mm, and the overall diameter is 571 mm. The post-top mounting diameter is specified as 76 mm.
Sustainable LED lighting solutions | Philips lighting
