Package Contents
The package includes:
- Soundcore Vortex Headphones
- Owner's Manual
- Charging Case
- USB Charging Cable
- 3.5mm Audio Cable
- Warning and Safety Information booklet
Diagram Description: Visual representation of the headphones, a circular charging case, owner's manual, warning booklet, USB charging cable, and 3.5mm audio cable.
Overview
The Soundcore Vortex headphones feature intuitive controls and connectivity options.
Diagram Description: The headphones are shown with labels pointing to key buttons and ports. Icons indicate the following functions:
- Power/Bluetooth Button: ⏻ (Long press for power, pairing)
- Volume Up / Next Track: ? / ⏭️
- Volume Down / Previous Track: ? / ⏮️
- Play/Pause / Call Answer/End: ▶️ / ⏸️ / ?
- Microphone: ?
Powering On/Off and Charging
Powering On and Off
- To Power On: Press and hold the power button (⏻) for 1 second. The blue LED will flash once.
- To Power Off: Press and hold the power button (⏻) for 3 seconds. The red LED will flash once.
Diagram Description: Illustration showing the power button and the corresponding LED indicator behavior for powering on (blue flash) and powering off (red flash).
Charging
Connect the headphones to a power source using the provided USB charging cable.
- Low Charge: The LED indicator will be solid red.
- Charging: The LED indicator will be solid red.
- Fully Charged: The LED indicator will be solid blue.
Diagram Description: The headphones are shown connected to a USB port on a laptop using the USB charging cable. The LED indicator status is described for different charge levels.
Pairing and Connectivity
Bluetooth Pairing
To connect your device via Bluetooth:
- Press and hold the power button (⏻) for 4 seconds to enter Bluetooth pairing mode. The blue LED will flash rapidly.
- On your device, search for Bluetooth devices and select "Soundcore Vortex".
- Once connected, the blue LED will be solid for 5 seconds.
- To re-enter pairing mode to connect to a new device, press and hold the power button (⏻) for 4 seconds.
Diagram Description: Shows the Bluetooth pairing process, including pressing the power button, the device searching for "Soundcore Vortex", and the LED indicator changing from flashing blue to solid blue upon successful connection. It also indicates a maximum Bluetooth range of 1 meter (≤ 1m) for initial pairing.
Aux Input
Connect a 3.5mm audio cable to the headphone's Aux port for wired audio playback.
Behavior: When an audio cable is plugged into the Aux port, the headphones will automatically switch to Aux mode, and Bluetooth will be disabled.
Diagram Description: Illustrates connecting a 3.5mm audio cable (labeled AUX) from a laptop to the headphones.
Controls
The Soundcore Vortex headphones offer comprehensive controls for music, calls, and voice assistants.
Music Playback and Volume
| Action | Button | Function |
|---|---|---|
| Press | Power Button (⏻) x1 | Play / Pause ▶️ / ⏸️ |
| Press and hold for 1 second | Power Button (⏻) | Next Track ⏭️ |
| Press and hold for 1 second | Power Button (⏻) | Previous Track ⏮️ |
| Press | Volume + / - Buttons | Volume Up ? / Volume Down ? |
Call Management
| Action | Button | Function |
|---|---|---|
| Press | Power Button (⏻) x1 | Answer / End Call ? |
| Press and hold for 1 second | Power Button (⏻) | Put current call on hold and answer incoming call |
| Press and hold for 1 second | Power Button (⏻) | Reject Call |
| Press | Power Button (⏻) | Switch between held call and incoming call |
Voice Assistant
| Action | Button | Function |
|---|---|---|
| Press and hold for 1 second | Microphone Button (?) | Activate Siri / other voice assistant software |
Diagram Description: Detailed layouts of buttons and their functions for music control, call handling, and voice assistant activation. LED status indicators are also shown: solid blue for active calls, flashing blue for incoming calls.
Warranty and Compliance
EU Declaration of Conformity
Anker Innovations Limited declares that the Soundcore Vortex (Model: A3031) complies with the essential requirements of the RED Directive 2014/53/EU.
Applicable Standards:
- Safety: EN 60950-1:2006+A11:2009+A1:2010+A12:2011+A2:2013
- Safety (Adaptor): Not specified, but implied compliance
- Health: EN 62479: 2010
- EMC: Draft EN 301 489-1 V2.2.0, Draft EN 301 489-17 V3.2.0
- Radio: EN 300 328 V2.2.0
The technical documentation and test reports are kept for at least 10 years.
Manufacturer Information:
Company: Anker Innovations Limited
Address: Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong
Contact: Beli zhang/manager, Tel. No.: +86 755 22674278, E-mail: Beli.zhang@oceanwing.com
Date of Declaration: 2018-08-24
Compliance Marks: CE
Warranty Terms
The product is covered by a warranty for 2 years from the date of delivery.
- The entire product, including all parts, is covered by the warranty.
- If the product is found to be defective, the consumer may exercise their rights under Article 11 of Law No. 6502 on Consumer Protection, including:
- Withdrawal from the contract.
- Requesting a reduction in the sales price.
- Requesting free repair.
- Requesting replacement of the product with an identical, defect-free one.
- If the consumer chooses the free repair option, the seller is obligated to repair the product without charging for labor, parts, or any other costs. The consumer can also exercise this right against the manufacturer or importer. The seller, manufacturer, and importer are jointly liable.
- If the product is repaired under warranty and malfunctions again, or if the repair exceeds the maximum allowed time, or if repair is deemed impossible by an authorized service station, seller, manufacturer, or importer (as determined by a report), the consumer may request a refund, a price reduction proportional to the defect, or replacement with a defect-free product if possible. The seller cannot refuse these requests.
- The repair period for the product shall not exceed 20 business days. This period starts from the date the defect is reported to the authorized service station or seller (during the warranty period) or from the date the product is delivered to the authorized service station (outside the warranty period). If the defect cannot be resolved within 10 business days, the manufacturer or importer must provide a similar product for the consumer's use until the repair is completed. The repair time is added to the warranty period if the product malfunctions during the warranty period.
- Defects arising from misuse, contrary to the user manual, are not covered by the warranty.
- In case of disputes regarding warranty rights, the consumer may apply to the Consumer Arbitration Committee or Consumer Court at their place of residence or where the transaction took place.
- If the seller fails to provide this Warranty Certificate, the consumer may apply to the General Directorate of Consumer Protection and Market Surveillance of the Ministry of Customs and Trade.
Warranty Validity Conditions
The warranty will be void under the following conditions:
- If the device is installed or repaired by anyone other than our authorized service personnel, or if the device is found to have been opened.
- The warranty does not cover defects arising from the use of the device for purposes other than its intended use or under abnormal conditions. The following are specifically excluded:
- Damage and defects resulting from use contrary to the user manual or installation guide.
- Damage and defects resulting from accidents.
- Damage and defects resulting from voltage incompatibility, faulty electrical installations, or use with voltages different from the one stated on the device label.
- Damage and defects resulting from natural disasters such as fire, flood, or lightning.
- Damage and defects occurring during the transportation, loading, unloading, or moving of the device after delivery to the consumer.
Importer Company:
Company Name: Sanal İletişim Teknoloji Ürünleri Pazarlama Ve Dış Ticaret LTD.ŞTİ.
Address: Dikilitaş mah. Tuna sokak no:6 /1A Beşiktaş/İstanbul
Telephone: 0212 258 70 50
E-Posta: [Email address not provided in OCR]
Website: www.Sanalbt.com
Stamp and Signature: [Space for stamp and signature]
Compliance Marks: CE, ♻️ (WEEE symbol indicating proper disposal)
