Anker Soundcore Space One Headphones
APP
Download the soundcore app to switch ambient sound modes, adjust EQ settings, update firmware, and explore more.
If your headphones cannot connect with the soundcore app, re-install the app or update it to the latest version in your mobile app store.
Available on: [Google Play logo], [App Store logo]
WEARING
Wear the headphones with the [L logo] on your left ear and [R logo] on your right ear. Adjust the length of the headband for a comfortable fit.
Diagram shows correct headphone placement with 'L' on the left and 'R' on the right earcup, and adjustment of the headband.
CHARGING
Fully dry the USB port before charging. Do not turn on your headphones while charging. Use a certified USB-C charging cable and charger to prevent any damage.
Diagram illustrates the USB-C charging port. Charging indicators show that 5 minutes of charging provides 4 hours of playback, and a full charge takes 2 hours.
POWERING ON & PAIRING
Auto Pairing: Press and hold the power button [⏻] for [3 seconds] to power on. The headphones will automatically enter Bluetooth pairing mode when connecting for the first time. Select "soundcore Space One" on your device's Bluetooth list to connect.
Google Fast Pairing: Enjoy instant pairing with your Android smartphone (running Android 6.0 and above) via Fast Pair enabled by Google.
To manually enter Bluetooth pairing mode, when the headphones are powered off, press and hold the power button [⏻] for [5 seconds] to pair.
Diagrams show button presses for powering on (3s) and manual pairing (5s). LED indicators display 'Pairing' and 'Connected' status. Phone interfaces illustrate Android Fast Pair and iOS Bluetooth connection steps.
DUAL CONNECTIONS
The headphones can connect with two devices at the same time. When already connected to one device, press the power button [⏻] [twice] to pair with another device.
In the soundcore app, go to settings and select Dual Connections > Enable Dual Connections > Connect New Device.
App screenshots show the 'Dual Connections' menu, listing connected devices like 'John's iPhone14' and 'Nevi's iPhoneX', and options to connect new devices.
BUTTON CONTROLS
You can enable Normal mode in the soundcore app.
| Function | Action |
|---|---|
| Switch ambient sound modes (ANC / Transparency) | NC button: Press once |
| Power on / off | Power button [⏻]: Press and hold for [3 seconds] |
| Play / Pause | Power button [⏻]: Press once |
| Next track | Volume up button [+]: Press and hold for [2 seconds] |
| Previous track | Volume down button [-]: Press and hold for [2 seconds] |
| Volume up / down | Volume up [+] / down [-] buttons: Press once |
| Answer / End a call | Power button [⏻]: Press once |
| Reject a call | Power button [⏻]: Press and hold for [2 seconds] |
| Mute / Restore the microphone | Volume down [-] button: Press and hold for [2 seconds] |
| Activate Voice Assistant | Power button [⏻]: Press and hold for [2 seconds] |
Diagrams illustrate button locations on the headphones corresponding to the functions listed in the table.
NOISE CANCELLATION
To reduce ambient noise, switch to noise cancellation (default) via the NC button and customize it in the soundcore app.
- Adaptive Noise Cancelling: Adjust the level of noise cancellation automatically for various scenarios.
- Custom Noise Cancelling: Set the level of noise cancellation manually.
App screenshots show Noise Cancellation settings, including options for Adaptive and Custom modes, with sliders or selectors for adjustment.
TRANSPARENCY
To stay aware of your surroundings while listening to music, switch to transparency mode via the NC button and customize it in the soundcore app.
- Custom Transparency Mode: Set the level of transparency manually.
App screenshots display Transparency Mode settings, allowing manual adjustment of ambient sound levels.
EASY CHAT
Easy Chat mode automatically lowers the volume of music and amplifies the voice of the person you're talking to so that you can communicate without taking the headphones off.
- To activate Easy Chat, hold the left panel for [1 second] until you hear a notification sound. Turn off this mode by releasing your hand. (Enabled in app)
- Easy Chat will automatically turn on when you're talking, and off when you stop talking for [5 seconds]. (Beta version is enabled in app)
Diagrams show activating Easy Chat by holding the left earcup panel. App interface elements for Easy Chat are also depicted.
WEARING DETECTION
Auto-pause music playback when removing the headphones, wear them again to resume. You can enable Wearing Detection in the soundcore app.
Diagram illustrates music pausing when headphones are removed and resuming when worn again.
LDAC
Enable LDAC in the soundcore app for higher-quality audio. Only available on devices powered by Android 8.0 or later.
- Use devices powered by Android 8.0 or later to experience LDAC quality sound.
- LDAC provides higher quality sound, increases power consumption, and reduces playtime.
- Enable LDAC in a low-interference environment to ensure a stable Bluetooth connection.
Instructions:
- Go to settings in the soundcore app.
- Click on "Sound Mode".
- Select "Preferred audio quality" to switch to LDAC codec.
- You will be notified that the headphones do not support LDAC when connected to two devices. Select "Turn on" to continue.
- It takes about [10 seconds] to switch audio codecs. You may be requested to update the headphones' firmware if available.
App screenshots guide users through enabling LDAC in 'Sound Mode', with prompts for firmware updates and warnings about dual connection limitations.
WIRED LISTENING
Play audio on an external device by plugging in a 3.5mm AUX cable. Wired listening will automatically turn off Bluetooth mode.
Image shows headphones connected via a 3.5mm AUX cable to an external audio source.
RESET
You might need to reset your headphones if you experience connectivity or function issues. Delete the pairing history from your Bluetooth device first. Press and hold the volume up [+] and power [⏻] buttons simultaneously for [5 seconds] until the LED flashes red three times.
Diagram illustrates the reset process by pressing and holding volume up and power buttons simultaneously.
LED LIGHT GUIDE
| LED Status | Meaning |
|---|---|
| Flashing white | Pairing mode |
| Flashing red | Low battery / Resetting |
| Flashing blue | Connecting |
| Steady blue | Connected |
| Light off | Device off / No power |
FIRMWARE UPDATE
You will be informed once the new version of firmware is detected when you connect the headphones with the app. Ensure the headphones are powered on and connected to a device until the firmware update is complete. During the update, avoid any usage and ensure stable access to the internet.
App screenshots show notifications for firmware updates, including version details and a download process.
SPECS
Specifications are subject to change without notice.
| Specification | Details |
|---|---|
| Input | 5 V ⎓ 0.58 A |
| Rated output power | 10mW |
| Battery capacity | 580mAh |
| Charging time | 2 hours |
| Playtime (with ANC off) | Up to 55 hours |
| Playtime (with ANC on) | Up to 40 hours |
| Driver size | 40mm |
| Frequency response | 20Hz - 20kHz |
| Impedance | 16Ω |
| Bluetooth version | 5.3 |
| Bluetooth range | 15m / 49ft |
1. Power consumption in standby mode: ≤0.5W
2. Powermanagement: ≤20min
3. Information of applicable adapter:
Brand: ANKER
Manufacturer: Anker Innovations Limited
Model: A2337
Input: 100-240Vac, 1A, 50-60Hz
Output: 5V ⎓ 3A / 9V ⎓ 3A / 12V ⎓ 2.5A / 15V ⎓ 2A / 20V ⎓ 1.5A (30W Max)
Default Open Port: Classic Bluetooth
Port Description: After the device is powered on, Classic Bluetooth visibility (or pairing mode) is automatically enabled, providing Bluetooth pairing (or control) services. The Bluetooth service is disabled when the device is powered off.
