Ariston Cube S Net Wi-Fi Thermostat

Introduction

Discover the Ariston Cube S Net, a Wi-Fi thermostat designed by Ariston to enhance your home heating and hot water experience. This device allows you to conveniently control your home's temperature and hot water settings remotely via a smartphone or PC. It actively monitors energy consumption, helping you save on gas bills, and provides real-time alerts for boiler malfunctions. For advanced support, the teleassistance service enables remote problem-solving by the Ariston service center.

For more information, visit the dedicated Ariston Net website: www.ariston.com/it/ariston-net or contact customer service at 800 300 633. Customer service is available 7 days a week from 8 AM to 8 PM.

Key Features

• Remote control of heating and hot water via smartphone or PC.
• Energy consumption monitoring for cost savings.
• Real-time malfunction alerts.
• Teleassistance service for remote support.

Safety First

This manual is an essential part of the product. Please read and keep it for future reference. Improper use or installation may lead to damage or safety hazards. Maintenance should only be performed by qualified personnel using original spare parts.

Important Safety Warnings:

• Failure to comply with warnings may result in personal injury or death.
• Improper use can cause damage to property, plants, or animals.
• Keep the appliance away from children and inexperienced users.
• Ensure proper battery replacement to avoid explosion risks.

Installation and Setup

The installation process is designed to be simple and quick, typically involving three main steps: Installation of the Cube S Net, Account Registration, and Internet Connection/Product Registration.

For detailed installation instructions, please refer to the relevant sections within this manual. Ensure the device is installed in an environment with normal pollution levels and at a height of approximately 1.50 m from the floor, away from heat sources and drafts.

For the complete installation manual, please download it from: http://www.ariston.com/it/Termoregolazione_Caldaie/cube_s_net

Connectivity

The Cube S Net supports Wi-Fi connectivity with WEP, WPA/WPA2 Personal encryption. Follow the on-screen prompts to connect to your Wi-Fi network during the initial setup or access the 'Connectivity' menu to configure it later.

Technical Specifications

The Ariston Cube S Net operates on a BUS BridgeNet® system and is compatible with 8 to 24V power supply. It features a 3.7 VDC lithium-ion battery and has a temperature accuracy of +/- 0.5°C. The device dimensions are 103mm x 103mm x 19.1mm, and it operates within the 2400 MHz - 2483.5 MHz frequency band.