TELE System SONIC32FL SMV14 Smart TV Quick Start Guide
This guide provides essential information for setting up and using your TELE System SONIC32FL SMV14 Smart TV.
Connections
The following inputs and outputs are available on the TV:
- CI/CI+: Common Interface module slot.
- USB 2.0 (x2): Ports for Mediaplayer function.
- RF IN (T2/C): Antenna input (IEC) for terrestrial (DVB-T/T2) or cable (DVB-C) signals.
- RF IN (S2): Satellite RF Antenna Input (Type F).
- HDMI (x3): HDMI1 (ARC), HDMI2, HDMI3 (v.1.4) for connecting AV sources.
- RCA: Audio-video input for connecting RCA devices (CVBS + Stereo LR).
- Audio Out: Digital audio output + earphone (3.5mm).
- LAN: Ethernet port (RJ45) for SmartTV/HbbTV functions.
- Power: 230VAC, 50Hz.
Remote Control
Insert 2 AAA batteries (not supplied), observing correct polarity. Dispose of used batteries separately from household waste.
WARNINGS: To prevent damage from corrosive liquid leakage, remove batteries if the remote will not be used for a long time. Do not mix old and new batteries, or different types of batteries.
First Installation
Connect the antenna cable (terrestrial and/or satellite) and the Ethernet cable (if available).
After powering on the TV, follow the on-screen wizard for the first installation:
- Select Menu Language.
- Connect to the network (wired or wireless):
- Cable: Connection is automatic.
- Wireless: Select your WiFi network and enter the password. The TV supports WPS.
- Select Country.
- Accept Terms and Conditions (some services may be unavailable if skipped).
- Select Usage Mode. The TV will then prompt to scan for channels.
- Set and confirm a PIN (remember this PIN).
ATTENTION! The system does not accept "0000" as a password.
Main Functions
1.1 Channel Scanning
To access channel search: Menu > Settings > Channel > Auto Scan (enter PIN).
- Select Reception Mode (Satellite, Antenna (DVB-T), Cable). Multiple selections are possible.
- Satellite:
- Select Operator (Tivusat or Standard).
- Select Antenna System (Single LNB, DiSEqC, Unicable).
- Select Satellite (default: Hotbird 13°E).
- Terrestrial:
- Select Channel Ordering (LCN).
- Scanning Mode: DTV.
- Start Scanning.
NOTE: Using LCN (terrestrial) or TivùSat (satellite) functions creates a predefined channel list. Viewing encrypted channels requires a separate Conditional Access Module (CAM) and smart-card.
1.2 Channel List
After scanning, a channel list is created. Use the CH.LIST button to view and manage it (create favorites, add to homepage, filter, edit). You can switch between terrestrial and satellite lists using the arrow keys.
1.3 Antenna System Configuration (Satellite)
Default settings are for a fixed antenna system with a single LNB receiving from Hotbird 13°E. Modify parameters in the Channels/Scan/LNB menu for different systems.
NOTES AND WARNINGS: The TV is compatible with universal single converters, multi-satellite DiSEqC (1.0 - 1.2), and multi-user SCR/dCSS/Unicable systems. Incorrect antenna configuration can prevent channels from loading. Professional installation is recommended. Signal indicators refer to the selected satellite transponder. Avoid connecting the TV to satellite signals via the loop-through connector of an external receiver, as both cannot operate simultaneously. For SCR systems, each connected device must use a different SCR channel. Use a dedicated external signal splitter for multiple receivers.
Smart (Home) Mode
The Home menu, accessible via the HOME button, provides access to:
- Application management and use.
- Web browser.
- Input source/mode selection.
- System settings.
WARNING: Connect to the internet to use SMART TV features.
Factory Reset
Resets all settings to their initial condition. Accessible via Menu > Settings > Support > Reset to Factory Default (enter PIN). You can choose to keep the channel list.
WARNING: Resetting clears all user customizations, including channels, apps, and settings. The TV will restart and display the first installation wizard.
E-Manual
The extended manual is available via Menu > Settings > Support > E-Manual. A digital version can be accessed via QR code.
Parental Control
Use Parental Control (via Menu > Settings > System > Parental Control) to block channels or services using a PIN. Options include time block, channel block, content block (age-based), and app block.
Technical Specifications
| Panel | ||
|---|---|---|
| Format | 32" - 16:9 wide (80 cm) | |
| Resolution | 1366 x 768 (HD ready) | |
| Contrast | 3000:1 | |
| Brightness | 200 (cd/m²) | |
| Viewing angle | 178°/178° (Horizontal/Vertical) | |
| Inputs | ||
| HDMI | x3 - HDMI (HDMI1 ARC) | |
| A/V in | x1 - CVBS + Audio LR | |
| USB | x2 - USBv2.0, compatible FAT32 and NTFS, Mediaplayer function | |
| TV Signals | ||
| Audio output | Coaxial + Earphone 3.5mm | |
| LAN | x1 - RJ45, Ethernet 10/100 | |
| RF input (DTT) | x1 - 75 Ω, IEC-type, VHF/UHF 7MHz/8MHz | |
| RF input (SAT) | x1 - 75 Ω, F type | |
| Common Interface | x1 - CI / CI+ | |
| Video | MPEG-2, MPEG-4, H.265 | |
| Audio | MPEG-1 layer 1/2, MPEG-2 layer 2/AC3/EAC3 | |
| Speaker | 4 x 10 W | |
| General | ||
| Power Supply | 100-240V, 50/60Hz | |
| Power Consum | <0.5W in Standby; 60W Max | |
| USB supported formats | AVI/MP4/MKV,WenM,3GPP,MPEG transport stream, FLV | |
| Wi-Fi | IEEE b/g/n, 2.4GHz | |
| TV dimensions (WxHxD) | with supports | 716 x 505 x 191 mm |
| without supports | 716 x 459 x 80 mm | |
| Standard wall bracket | VESA 200/100 | |
| Included Accessories | x1 standard remote control, x1 EASY remote control unit, x1 instruction manual |
Simplified EU Conformity Declaration
The manufacturer, TELE System Digital s.r.l., declares that the radio equipment type SMART TV named SONIC32FL SMV14 complies with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at: https://www.telesystem.it/CE
Patent Lists - Access Advance
TELE System: Digitale per Passione
Dichiarazioni di conformità EU - TELE System
