Corsair HS70 Bluetooth Multi-Platform Gaming Headset

Product Overview and Components

The CORSAIR HS70 BLUETOOTH is a multi-platform gaming headset designed for both wireless Bluetooth and wired connectivity via USB and 3.5mm audio jacks.

Key Components:

• A CORSAIR HS70 BLUETOOTH headset
• B USB audio and charging cable
• C 3.5mm audio cable
• D Detachable microphone boom
• E 3.5mm audio jack
• F USB-C port
• G Mute button
• H Volume control
• I Bluetooth MFB (Multi-Function Button for power/pairing)
• J Bluetooth status LED indicator
• K Headband adjustment

Getting Started

Bluetooth Connectivity: Connect to your mobile device or other Bluetooth-compatible products to receive phone calls and listen to music or other content.

3.5mm Audio Jack Connectivity: Connect to console controllers or other compatible devices. Important: The included 3.5mm cable is directional. Ensure the headset icon on the cable end is correctly oriented before connecting.

PC Connectivity: For optimal performance on PC, use the USB connection. Download the iCUE software from corsair.com/support/downloads to unlock the full feature set. Install iCUE on a PC running Windows 10 or later, reboot, and launch the software to customize audio equalizer (EQ) settings and adjust microphone input volume and sidetone.

Note: Prolonged listening at high volumes may adversely affect your hearing. Take breaks between sessions and always begin with the volume at the lowest possible level before increasing.

Charging the Headset

Important: The HS70 BLUETOOTH headset must be fully charged before its first use.

Connect the USB charging cable to a working USB port on your PC and then to the headset.

The HS70 BLUETOOTH headset battery has no "memory effect," meaning it does not need to be fully discharged before recharging. The lithium-ion battery supports hundreds of charge/discharge cycles. Ensure your USB port is USB 2.0 or better.

Charging Status LED:

• RED (SOLID): Charging
• OFF: Fully charged

Bluetooth Mode Operations

Pairing: Ensure the headset is off. To enable pairing, press and hold the MFB until the Bluetooth status LED blinks red and blue. Once paired, the MFB LED will blink blue. Select the headset from your mobile device's Bluetooth list.

Turning Bluetooth On/Off: Press and hold the MFB for 3-5 seconds to turn Bluetooth mode on or off. The Bluetooth status LED will turn off when Bluetooth is disabled.

Bluetooth Status Indicators:

• Disconnected: Double blink (red)
• Pairing: Alternating blink (red and blue)
• Connected: Single blink (blue)

Call and Media Controls

Answering and Ending Phone Calls: Single press the MFB to answer an incoming call. Single press the MFB again to end the call.

Music Playback: Single press the MFB to play or pause. Double press quickly to skip forward. Triple press quickly to skip backward.

Battery Removal Information

This product uses a rechargeable battery. Follow safety guidelines for disposal and recycling.

The diagrams illustrate a 6-step process for safely removing the battery for disposal and recycling. These diagrams depict a step-by-step disassembly process to access and remove the battery pack from the headset.

CORSAIR MEMORY, Inc. encourages customers to recycle used electronic hardware and rechargeable batteries in accordance with local laws and regulations.