Introduction
This report presents the findings of radio frequency testing conducted on the Extreme Networks AP302W Access Point. The testing was performed by SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory in accordance with established industry standards, including 47 CFR FCC Part 15 and ANSI C63.10-2013. The document outlines the test configuration, methodology, and results for various RF parameters to ensure compliance.
Key Information
- Equipment: Access Point
- Brand Name: Extreme Networks
- Model Name: AP302W
- FCC ID: QXO-AP302W
- Applicant/Manufacturer: Extreme Networks, Inc.
- Testing Laboratory: SPORTON INTERNATIONAL INC. EMC & Wireless Communications Laboratory
- Test Dates: September 9, 2020 - October 30, 2020
Test Summary
The Extreme Networks AP302W Access Point was evaluated for compliance across several key RF performance indicators. The test results indicate that the device meets the applicable technical standards for:
- Antenna Requirement
- AC Power-line Conducted Emissions
- DTS Bandwidth
- Maximum Conducted Output Power
- Power Spectral Density
- Emissions in Non-restricted Frequency Bands
- Emissions in Restricted Frequency Bands
For detailed test results and explanations, please refer to the respective sections within the full report.
Compliance Standards
The testing adhered to the following primary standards:
- 47 CFR FCC Part 15
- ANSI C63.10-2013
- FCC KDB 558074 D01 v05r02
- FCC KDB 414788 D01 v01r01
Testing Location
Testing was conducted at SPORTON INTERNATIONAL INC.'s facilities located in Taiwan (R.O.C.). Specific test sites and environments are detailed within the report.
