Petlibro Granary Intelligent Feeder with Camera

Model: PLAF203

Petlibro

Manufacturer: Shenzhen Libro Technology Co., Ltd.

Address: 12/F, Tower B, GALAXY WORLD, Yabac Street, Longgang District, Shenzhen, China

Made in China

PLAF203-V0004

FCC ID: 243DE-PLA200C28-PLAFU AN ICES-003 (SEE)

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Please read this manual before using the product and keep it for future reference. The product is intended for household use only.

Safety Instructions

• Use the feeder in a dry place.
• Place the feeder on a flat surface.
• Dispose of all packaging materials in accordance with applicable regulations. Some elements may be packed in plastic bags; these bags can be a suffocation hazard. Keep them away from children and pets.
• Do not use the feeder for pets that cannot reach the food bowl or have any physical disabilities.
• Do not immerse the feeder base in water, as this may damage the electronic components.
• Do not use the feeder outdoors. Regularly check its operation to ensure it is functioning correctly.
• Do not disassemble the feeder except as instructed in this user manual.
• Use only accessories recommended or sold by the manufacturer. Using unrecommended or non-manufacturer-sold accessories may cause safety hazards.
• Do not modify the feeder.
• Check the feeder after installation. Do not plug it in if there is water on the cord or plug.
• To avoid tripping, always place the power cord away from high-traffic areas.
• If the power cord is damaged, it must be replaced with a special cord available from the manufacturer or its service center.
• This feeder is designed for dry food only. Do not use with wet food, pet supplements, or medication.
• Do not install or store the feeder in locations exposed to atmospheric conditions or temperatures below 0°C (32°F).
• Do not use the feeder without adding pet food first.
• Turn off the feeder when not in use.
• The device may be used by children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, provided they are supervised or have received instructions on the safe use of the device and understand the risks involved. Children should not play with the device. Cleaning and user maintenance should not be performed by children without supervision.
• Only use the feeder with the power adapter supplied with the device.
• If the power cord is damaged, it must be replaced with a special cord available from the manufacturer or its service center.
• This feeder is intended for dry food only. Do not use with wet food, pet supplements, or medication.
• Do not install or store the feeder in locations exposed to atmospheric conditions or temperatures below 0°C (32°F).
• Do not use the feeder without adding pet food first.
• Turn off the feeder when not in use.
• The device may be used by children aged 8 and above, and persons with reduced physical, sensory, or mental capabilities or lack of experience and knowledge, provided they are supervised or have received instructions on the safe use of the device and understand the risks involved. Children should not play with the device. Cleaning and user maintenance should not be performed by children without supervision.

External Power Adapter

Use only with the power adapter supplied with the device.

Model List:

• USA: TPA-418G050200U01
• EU: TPA-418B050200VU01
• UK: TPA-418B050200BU01
• Japan: TPA-418G050200PU01
• AU: TPA-418B050200SU01

Information on WEEE Disposal and Recycling

Products marked with this symbol are waste electrical and electronic equipment (WEEE, according to Directive 2012/19/UE), which should not be mixed with unsorted municipal waste. You should protect human health and the environment by handing over your waste equipment to a designated collection point for the recycling of electrical and electronic equipment, designated by the government or local authorities. Proper disposal and recycling will prevent potential negative consequences for the environment and human health. Please contact the installer or local authorities for information on the location and operating conditions of such collection points.

Package Contents

• Automatic Pet Feeder x1
• Food Bowl with Holder x1
• Power Adapter x1
• Moisture Absorber Bag x1
• User Manual x1
• Quick Start Guide x1

Product Overview

1. Lid
2. Sealing Strip
3. Food Tank
4. Transparent Window
5. Tank Base
6. Anti-clog Sensor
7. Camera
8. Infrared Light
9. Control Panel
10. Display Panel
11. Food Outlet
12. Feeder Base
13. Stainless Steel Bowl
14. Bowl Holder

Button and Indicator Overview

Button Overview

• Unlock: Press and hold for five seconds to unlock the buttons; the device will emit a sound. Only this button works when locked.
• Manual Feed: When unlocked, press once to dispense one portion of food.
• Play: When unlocked, press once to replay the feeding recording.
• Reset: When unlocked, press and hold until the device emits a sound and the Wi-Fi indicator starts flashing.

Indicator Overview

Feeder Configuration

First Steps

Installation

1. Remove the food bowl from the food tank. Turn the lid counter-clockwise to remove it. Gently pull the latches on both sides outwards and then upwards to remove the food tank.
2. Insert the microSD card (card NOT included). To enable video recording, first insert the microSD card, then enable recording in the app: tap the device's camera icon in the top right corner > Video Settings.
   • Note: The product supports standard microSD cards (such as Samsung and SanDisk) with a capacity of 16–256 GB and a speed class of 10 or higher.
   • Before first use, format the microSD card in the Petlibro app under settings.
   • To remove the microSD card, gently press it until it is released.
   • For privacy reasons, video files on the microSD card can only be viewed in the Replay section of the Petlibro app. The microSD card cannot be read by a computer or phone.
   • microSD cards with speeds higher than V30 are not supported.

   1) Open the battery compartment; the microSD card slot is in the middle of the compartment.

   2) Insert the microSD card in the direction shown. Push it in until it clicks into place. Do not use force or press excessively when inserting the microSD card.

   Note: Insert the microSD card correctly. Incorrect insertion may cause malfunction.

3. Connect the power.
   • 1) Connect the 5V power adapter to an electrical outlet and the USB cable to the USB port on the back of the feeder.
   • 2) The indicator lights will turn on automatically, indicating the feeder is powered on.
   • 3) Open the battery compartment at the bottom of the feeder. Install three D-type alkaline batteries (not included) in case of a power outage. Ensure the batteries are installed according to the positive (+) and negative (-) markings in the compartment.
     • Note: Batteries are not included.
     • To avoid interference with feeding during a sudden power outage, do not use batteries as the sole power source. Batteries should be used as a backup plan.
     • To prevent battery leakage, remove them if the device will not be used for an extended period.
     • When the feeder is powered solely by batteries, the Wi-Fi, camera, recording button, and reset button functions will be turned off to extend battery life. Feeding schedules will still operate normally.
4. Place the moisture absorber bag in the inner box under the lid.
   • Note: It is recommended to replace the moisture absorber bag every 15 days to prevent mold growth.
   • Remove the moisture absorber bag before cleaning the lid.
5. Install the food tank. Align the food tank with the notches on both sides of the tank base.

Adding Dry Food

6. Add dry pet food to the food tank.

• Note: To prevent uneven food dispensing, add enough food to the visible level.
• Recommended kibble size: 2–15 mm / 0.07–0.6 inches in diameter.
• Do not use canned, wet, or moist food.

7. Replace the lid. Turn the lid clockwise from the right rotation mark to the left rotation mark to lock it in place.

Attaching the Bowl

8. Attach the food bowl. Attach the bowl to the designated notches under the feeder base. Note: Before moving the feeder, press the bowl down to detach it from the feeder base. If there is food in the bowl, handle it carefully to avoid spills. Lift the feeder by holding the base, not other parts.

App Control

1. Download and install the PETLIBRO app.

Note: There are two similar apps available in your phone's app store: PETLIBRO and PETLIBRO LITE. Please ensure you download the "PETLIBRO" app (not "PETLIBRO LITE").

2. To complete the setup, choose one of the two options in the PETLIBRO app:

• Option 1
• Option 2

Maintenance and Care

Regular cleaning of the feeder is recommended for your pet's health.

Washable parts include: the lid, food tank, tank base, stainless steel bowl, and bowl holder. Clean other parts with a dry cloth.

Clean the lid, food tank, and tank base. Before removing the food tank, ensure it is empty to avoid spilling food.

1. Disconnect the power before cleaning.

1. Turn the lid counter-clockwise to remove it, then remove the moisture absorber bag from the inner container under the lid.
2. Gently pull the latches on both sides outwards, then upwards, to remove the food tank.
3. Turn counter-clockwise to remove the tank base.
4. Rinse thoroughly and allow to dry the lid, tank, and tank base.

6. Reassemble them onto the device. Turn the tank base clockwise until it locks into place.

7. Install the tank and lid.

Cleaning the Food Bowl

1. Press the food bowl with the holder to remove it.

2. Rinse thoroughly and allow to dry before reassembling onto the device.

Specifications

Troubleshooting

Camera Troubleshooting

Manufacturer Information

Manufacturer Name: LIBRO TECHNOLOGY CO., LIMITED

Address: Room 616, 6/F, Kam Tim Industrial Building, 135 Connaught Road West, Western District, Hong Kong

Email: leo.wang@designlibro.com

EU Responsible Party: SUCCESS COURIER SL

Address: CALLE RIO TORMES NUM. 1, PLANTA 1, DERECHA, OFICINA 3, Fuenlabrada, Madrid, 28947 Spain

Email: support@petlibro.com

Safety Warnings and Information

All product usage information is provided in the user manual. Before using the product, please read its content and follow the instructions.

Please also read the following information before use:

Usage Warnings

Product Damage Risk:

• Products should only be used as intended, as described in the user manual.
• Regularly check the condition of the food dispenser or bowl, especially mechanical parts such as lids, handles, dispensing mechanisms, and food tanks. If visible damage is found, stop using the product and contact customer service.
• Do not overload food or water tanks – adhere to the capacities specified by the manufacturer.

Pet Safety Risk:

• Ensure the food dispenser is suitable for the pet's size, age, and dietary needs.
• Regularly check the quality of stored food – ensure it is fresh and stored in dry conditions to prevent spoilage.
• Place the device in a stable location, easily accessible to the pet, but away from areas exposed to excessive sunlight, moisture, or contact with other animals.

Child Safety Risk:

• Food dispensers are not toys. Keep them out of reach of children to prevent accidental damage to the device.
• Do not allow children to operate the device without adult supervision, especially when refilling food or maintaining mechanisms.

Risk Associated with Electronic Components:

• Regularly check the condition of power cords, batteries, and electronic components. If damaged, stop using the device.
• For electrically powered models, ensure the device is connected to a stable power source.
• If the device is battery-powered, replace batteries according to the user manual and use only manufacturer-recommended batteries.

Recommendations for Proper Usage

• Before first use, read the user manual and ensure all components, such as lids, dispensing mechanisms, and food tanks, are correctly installed.
• Regularly refill the food tank with food that complies with the manufacturer's recommendations, avoiding products that may cause mechanism blockage.
• For models with automatic functions, ensure the feeding schedule is set correctly.

Maintenance and Storage:

• Products should be stored in a dry and clean place, away from moisture and extreme temperatures.
• Regularly clean dispensers and bowls according to the manufacturer's instructions, using mild detergents and soft materials. Do not use harsh chemicals or tools that may damage the device.
• Replace consumable parts, such as filters (if applicable), according to the manufacturer's recommendations.

Battery Safety:

• For battery-operated devices, use only batteries recommended by the manufacturer.
• Dispose of used batteries in accordance with local environmental regulations.
• If the device will not be used for an extended period, remove the batteries to prevent leakage.

Additional Precautions

Pet Adaptation:

• Observe the pet's reaction to the food dispenser or bowl – ensure that using the device does not cause stress or discomfort.
• For pets prone to overeating, set appropriate food portions or feeding schedules to prevent health problems.

Damage and Service:

• All repairs of mechanical or electronic devices should only be performed at authorized service centers.
• Do not make unauthorized modifications to the device, as this may affect its safety and functionality.

Declaration of Conformity

The products have been designed in accordance with the safety requirements specified in Regulation (EU) 2023/988. They comply with relevant technical standards, including those for user safety, electromagnetic compatibility, and material durability.

Environmental Protection

Used electronic equipment marked in accordance with the European Union Directive, should not be placed together with other municipal waste. It is subject to selective collection and recycling at designated points. By ensuring its proper disposal, you prevent potential negative consequences for the natural environment and human health. The system for collecting used equipment complies with local environmental regulations for waste disposal. Detailed information on this matter can be obtained from the municipal office, cleaning facility, or store where the product was purchased.

The product meets the requirements of the EU New Approach Directives concerning user safety, health protection, and environmental protection, specifying the hazards that should be detected and eliminated.

This document is a translation of the original user manual created by the manufacturer.

Detailed information on warranty conditions from the distributor/manufacturer is available on the website: https://serwis.innpro.pl/gwarancja

Products should be regularly maintained (cleaned) by the user or by specialized service points at the user's expense and scope. In the absence of information on necessary cyclical or service maintenance actions in the user manual, regularly, at least once a week, assess the condition of the product's physical state compared to its physically new state. In case of detecting or identifying any difference, promptly take maintenance (cleaning) or service steps. Failure to properly maintain (clean) and react upon detecting a difference may lead to permanent damage to the product. The warranty does not cover damage resulting from neglect.

Importer:

INNPRO Robert Błędowski sp. z o.o.

ul. Rudzka 65c

44-200 Rybnik, Poland

tel. +48 533 234 303

hurt@innpro.pl

www.innpro.pl

Simplified EU Declaration of Conformity

LIBRO TECHNOLOGY CO., LIMITED hereby declares that the radio equipment type Petlibro Granary, 5L camera feeder is in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://files.innpro.pl/petlibro

Manufacturer's Address: Room 616, 6/F, Kam Tim Industrial Building, 135 Connaught Road West, Western District, Hong Kong

Radio frequency: 2400MHz-283.5MHz

Maximum radio frequency power: <20dBm