VITTSJÖ Nest of Tables

Safety Warnings

WARNING: Delicate table. Do not sit on the product.

WARNING: Do not place heavy objects on this product. Maximum load: 10 kg (22 lb).

Parts and Tools

Parts Included:

8x Adjustable Feet (Part numbers: 122158, 143131)
7x Small Discs/Washers (Part number: 107091)
30x Dowels (Part numbers: 117689, 130610)
10x Screws (Part numbers: 123723, 124694)
4x Brackets (Part numbers: 10130559, 10130564)

Tools Required:

Allen Key (provided, Part number: 10037615)
Screwdriver (Phillips head)

Assembly Instructions

Assembly for the Larger Table

Step 1 (Page 5)

Assemble the base frame and attach the first two vertical legs. Insert 2x dowels (117689, 130610) per leg into the base frame, then attach the legs.

Step 2 (Page 6)

Attach the lower crossbars to the vertical legs. Use 2x dowels (117689, 130610) and 2x screws (10037615) per crossbar. Use the Allen key.

Step 3 (Page 6)

Attach the remaining two vertical legs to the base frame. Insert 2x dowels (117689, 130610) per leg into the base frame, then attach the legs.

Step 4 (Page 7)

Attach the upper crossbars to the vertical legs. Use 2x dowels (117689, 130610) and 2x screws (10037615) per crossbar. Use the Allen key.

Step 5 (Page 7)

Screw the 8x adjustable feet into the bottom of the vertical legs. Turn clockwise to tighten.

Step 6 (Page 8)

Carefully flip the assembled frame upside down. Attach the back panel support rails using 6x small discs/washers (107091) and screws (107091).

Step 7 (Page 9)

Carefully place the glass top onto the assembled frame.

Step 10 (Page 16)

Attach the back panel to the larger table frame using 10x screws (123723, 124694) and a screwdriver.

Assembly for the Smaller Table

Step 1 (Page 10)

Assemble the base frame and attach the first two vertical legs. Insert 2x dowels (117689, 130610) per leg into the base frame, then attach the legs.

Step 2 (Page 11)

Attach 2x brackets (10130559, 10130564) to the vertical legs using 2x screws (10037615) per bracket. Use the Allen key.

Step 3 (Page 11)

Attach the base frame to the vertical legs. Align the base frame with the attached brackets and secure with 2x screws (10037615) per leg. Use the Allen key.

Step 4 (Page 12)

Attach the upper crossbars to the vertical legs. Align the crossbars with the brackets on the legs and secure with 2x screws (10037615) per crossbar. Use the Allen key.

Step 5 (Page 12)