Schneider Electric ABL8BBU24200 Battery Control Module
Product Data Sheet - Characteristics
Product Overview
The ABL8BBU24200 is a battery control module from Schneider Electric's Phaseo range, designed for regulated Switch Mode Power Supplies (SMPS). It operates with an input voltage range of 24 to 28.8 V DC and provides an output voltage that is 0.5 V lower than the battery voltage in battery mode, or 0.25 V lower than the input voltage in nominal mode. The module has a maximum output current of 20 A.
Disclaimer: The information provided is for general description and technical characteristics. It is not intended to substitute for determining product suitability or reliability for specific user applications. Users and integrators are responsible for performing appropriate risk analysis and testing. Schneider Electric Industries SAS is not liable for misuse of the information.
Main Characteristics
| Range of product | Battery control module |
|---|---|
| Product or component type | Phaseo |
| Input voltage | 24...28.8 V DC |
| Output voltage | (Ubattery-0.5) V in battery mode DC; (Uin-0.25) V in nominal mode DC |
| Maximum output current | 20 A |
Complementary Characteristics
| Input voltage limits | 22...30 V |
|---|---|
| Maximum power dissipation | 7 W |
| Activation threshold | Adjustable 22...36 V |
| Number of output channels | 1 |
| Current consumption | 0.6 A on load; 0.1 mA no load; <= 40.6 A |
| Output protection type | Against overload (protection technology: 1.5 x In); Against short-circuits (protection technology: battery-backed mode, automatic reset); Against short-circuits (protection technology: power-supplied mode) |
| Connections - terminals | For diagnostic relay: removable screw terminal block, connection capacity: 1 x 0.75 mm²; For input connection: screw type terminals, connection capacity: 2 x 0.5...2 x 10 mm² AWG 20...AWG 8; For output connection: screw type terminals, connection capacity: 2 x 0.5...2 x 10 mm² AWG 20...AWG 8 |
| Fixing mode | By clips on 35 mm symmetrical DIN rail, operating position: horizontal; By clips on 35 mm symmetrical DIN rail, operating position: vertical |
| Operating altitude | 2000 m |
| Marking | CE |
| Name of test | Electrostatic discharges conforming to EN/IEC 61000-4-2; Emission conforming to EN 61000-6-3; Induced electromagnetic field conforming to EN/IEC 61000-4-6 level 3; Radiated electromagnetic field conforming to EN/IEC 61000-4-3 level 3; Rapid transient conforming to IEC 61000-4-4 level 3; Surge conforming to EN/IEC 61000-4-5 level 2; Conducted/Radiated emissions conforming to EN 55022 class B, 20 % |
| Local signalling | 1 C/O relay for alarm status; 1 C/O relay for battery status; 1 C/O relay for power supply status; LCD screen for module status |
| Dimensions | Width: 60 mm; Height: 125 mm; Depth: 160 mm |
Environment and Certifications
| Product certifications | RCM, EAC |
|---|---|
| Standards | UL 508, CSA C22.2 No 60950-1 |
| Ambient air temperature for operation | -25...60 °C |
| Ambient air temperature for storage | -40...85 °C |
| Environmental characteristic | EMC conforming to EN 61000-6-3; EMC conforming to EN/IEC 61000-6-2; Safety conforming to EN/IEC 60950-1; Safety conforming to EN/IEC 61204-3 |
| IP degree of protection | IP20 conforming to EN/IEC 60529 |
| Dielectric strength | 500 V between input and ground; 500 V between output and ground |
| Overvoltage category | Class II conforming to VDE 0106-1 |
| Relative humidity | 0...90 % during operation; 0...95 % during storage |
| MTBF reliability | 718708 H at 24 V DC (UTE C80-810 calculation method) |
| Vibration resistance | 2 gn (f= 11.9...150 Hz) conforming to EN/IEC 61131-2; 3.5 mm (f= 3...11.9 Hz) conforming to EN/IEC 61131-2 |
Packing Information
| Unit Type of Package 1 | PCE |
|---|---|
| Number of Units in Package 1 | 1 |
| Package 1 Weight | 1.468 Kg |
| Package 1 Height | 9 Cm |
| Package 1 width | 19.5 Cm |
| Package 1 Length | 19.5 Cm |
| Unit Type of Package 2 | S03 |
| Number of Units in Package 2 | 8 |
| Package 2 Weight | 11.929 Kg |
| Package 2 Height | 30 Cm |
| Package 2 width | 30 Cm |
| Package 2 Length | 40 Cm |
| Unit Type of Package 3 | P06 |
| Number of Units in Package 3 | 72 |
| Package 3 Weight | 118.7 Kg |
| Package 3 Height | 80 Cm |
| Package 3 width | 80 Cm |
| Package 3 Length | 60 Cm |
Offer Sustainability
| Sustainable offer status | Green Premium product |
|---|---|
| REACH Regulation | REACH Declaration |
| REACH free of SVHC | Yes ✔️ |
| EU RoHS Directive | Pro-active compliance (Product out of EU RoHS legal scope) |
| Mercury free | Yes ✔️ |
| RoHS exemption information | Yes ✔️ |
| China RoHS Regulation | China RoHS Declaration |
| Environmental Disclosure | Product Environmental Profile |
| Circularity Profile | End Of Life Information |
| PVC free | Yes ✔️ |
Contractual Warranty
| Warranty | 18 months |
|---|
Dimensions Drawings
The module has a width of 60 mm (2.36 inches), a height of 125 mm (4.92 inches), and a depth of 160 mm (6.3 inches). These dimensions are visually represented in the original document, showing the physical layout and measurement points.
Mounting and Clearance
Mounting: The battery control module is designed for mounting on a 35 mm symmetrical DIN rail, compatible with standards such as AM1 DE200, AM1 ED200, AM1 DP200, and DZ5 MB200. The mounting mechanism utilizes clips.
Clearance: A minimum clearance of 50 mm (1.97 inches) is recommended above and below the module for proper ventilation and operation.
Connections and Schema
Wiring Diagram: The wiring diagram illustrates the connections for the ABL8BBU24200 module. It shows input terminals (N, L1), output terminals (Out), diagnostic relay connections (X101, X202), and connections to compatible power supply units (e.g., ABL 8RP, ABL 8WP) and battery modules (e.g., ABL 8BPK24A0). The diagram also indicates voltage and current ratings for various connections.
Maximum Unstored Charge Capacity: The following table lists compatible ABL power supply units and their maximum unstored charge capacity in microfarads (µF):
| ABL Model | Max. Unstored Charge Capacity (µF) |
|---|---|
| 8RPS24030 | 30,000 |
| 8RPS24050 | 50,000 |
| 8RPS24100 | 100,000 |
| 8RPM24200 | 100,000 |
| 8WPS24200 | 100,000 |
| 8WPS24400 | 100,000 |
Output States: The module provides status indications based on output conditions (U = 24 Vdc: I > 5 mA, U = 230 Vac: I < 500 mA):
- No power from the power supply: Indicates "No alarm".
- Alarm or device not supplied: Indicates "Power from the battery pack".
- No power from the battery pack: Indicates "Power from the power supply".
Inputs States (Dry Contact): The module supports "Operational battery" and "Battery inhibited" input states.
Cable Types and Wire Sizes
The following tables specify compatible cable types and wire sizes for connecting the ABL8BBU24200 and related modules:
IEC/EN Standards
| Module | Connection Type | Wire Size (mm²) | Wire Size (AWG) |
|---|---|---|---|
| ABL 8BBU24200 | In, +/-, Out+/- | Ø 4 mm² | 10 AWG |
| ABL 8BBU24400 | In, +/-, Out+/- | Ø 4 mm² to 10 mm² | 10 AWG |
| Other ABL Models (e.g., 8RPS, 8RPM, 8WPS) | In +/- | 1...4 mm² | 16...12 AWG |
| +/- | 4...10 mm² | 12...6 AWG | |
| Out +/- | 6 mm² (8RPS) / 10 mm² (8RPM, 8WPS) | 10 AWG (8RPS) / 6 AWG (8RPM, 8WPS) |
UL Standards
| Module | Connection Type | Wire Size (mm²) | Wire Size (AWG) |
|---|---|---|---|
| ABL 8BBU24200, ABL 8BBU24400 | OFF/PSU/Alarm/ | 0.14...1 mm² | 26...16 AWG |
| In, +/-, Out+/- | Ø 12 AWG | 12 AWG | |
| Other ABL Models (e.g., 8RPS, 8RPM, 8WPS) | In +/- | - | 16...12 AWG |
| +/- | - | 12...6 AWG | |
| Out +/- | - | 10 AWG (8RPS) / 6 AWG (8RPM, 8WPS) |
Product Life Status: Commercialised
