Wi-Fi Smart Garage Door Opener User Manual

Product Components

The Wi-Fi Smart Garage Door Opener package includes:

• Smart Garage Controller: The main control unit.
• Door Sensor: Detects the open/closed status of the garage door.
• Line Holds: For managing wires.
• Sticker: Adhesive for mounting.
• Ties: For cable management.
• Brackets: For mounting the sensor.
• Wall Nails: For mounting.
• Screws: For mounting.
• Wall Console: The wired button for manual operation (Note: This is typically part of the existing garage door opener system, not always included with the smart controller itself, as per the manual's note).

Visual representation of components: Smart Garage Controller, Door sensor, Line Holds, Sticker, Ties, Brackets, Wall Nails, Screws, Wall Console.

Test Device For Opener Compatibility

Before installation, test your garage door opener's compatibility:

1. Power Up: Connect the garage controller. The red light (?) and blue light (?) will flash alternatively.
2. Wire Connection: Use the included Red & Black wires to connect the device to your opener. Terminate each wire to the same terminals where the wall button wires are connected.
3. Test Activation: Use a small screw or nail to press the button on the device. Your garage door should activate (open or close).

Note: The garage door opener motor and existing wall console are not included with this smart controller.

Diagram showing the Smart Garage Controller connected to the Garage Door Opener MOTOR via Red and Black wires, mimicking the connection of a standard wall button.

Test Result Confirmation

Test OK! If clicking the device's button successfully opens or closes the garage door each time, your opener is compatible.

Checklist Before Using the Device

• Your smart phone or tablet must be connected to a 2.4G Wi-Fi network with internet access.
• This device exclusively supports 2.4G Wi-Fi. If your router provides both 5G and 2.4G signals, ensure your device connects to the 2.4G network.
• Download either the "Tuya Smart" APP or the "Smart Life" APP from the App Store or Google Play Store.
• During the pairing process, ensure your iOS or Android device and the garage controller are within the range of your Wi-Fi router.
• Verify that your router's MAC filtering is disabled or configured to allow the device.

Diagram illustrating the network setup: Internet ? -> Router ? -> Smart Garage Controller ?, connected to a smartphone ?.

Add Device to App

Follow these steps to add the device after confirming compatibility and downloading the app:

1. Ensure your garage door is closed before starting.
2. Power up the garage controller; the red (?) and blue (?) lights will flash alternatively.
3. Launch your chosen APP (Tuya Smart or Smart Life) and tap the "+" icon in the top right corner.
4. Navigate to "Electrical" and select the "Wall Switch" (or similar garage door opener category).
5. Tap "Confirm indicator rapidly blink" (or the equivalent prompt indicating the device is in pairing mode).
6. Enter your correct 2.4G Wi-Fi password and tap "Confirm".
7. The app will automatically connect to the device. Once completed, you will be prompted to rename the device. Enter a new name and save.

Visuals: App interface screenshots showing the process of adding a device, selecting categories, entering Wi-Fi details, and device status indicators (e.g., "Opening", "Close", "Offline").

The app interface displays device status: "ON: The door is open.", "OFF: The door is close.", "Offline: Fail to control." Users can tap icons to control the door.

Additional app features shown include: Welcome Home settings, location settings, Socket, All Devices, countdown timers, and record logs.

EASY INSTALLATION

Important: Keep your garage door closed during installation.

Diagram illustrating the installation setup: Wall, Garage door, Sensor with cable, Magnet, and wires.

Installation Steps:

1. 1st Step: Power up. (Connect the device as described previously).
2. 2nd Step: Connect to the wall console. Insert the Red & Black wires (2.0mm terminal) into the garage opener, connecting them to the same terminals as the existing wall button wires.
3. 3rd Step: Connect to the garage door.
   • Attach the sensor to the garage door frame and the magnet to the garage door itself.
   • Ensure the gap between the sensor and magnet is between 3mm and 15mm when the door is closed.
   • Secure the sensor and magnet using the provided screws, brackets, 3M adhesive, wall nails, line holders, or ties.

Detailed diagrams show sensor placement: a sensor mounted on the wall, and a magnet mounted on the garage door, with a specified gap of 3-15mm.

Mounting options are illustrated: using screws and brackets on the door, or using 3M adhesive tape on the wall. Both methods can be used for added security.

App Functionality and Integrations

The app allows for device management, including renaming, sharing, and Over-The-Air (OTA) updates. Users can also manage groups, positions, and view device details like ID, IP, and MAC addresses. Notice for open/close alarms and operation records are available, along with fast single countdown timers and repeat timers.

Visual representation of app interface elements: "Rename/Share/OTA/Remove", "Manage Group/Position", "Device ID/IP/MAC/Feedback", "Notice: Open/Close Alarm", "Check the operation records", "For fast single countdown timer", "For single repeat timers", "Garage door-vdevo", "Tap here to enter the full function operation interface.", "Tap to turn ON/OFF".

Works With Voice Assistants:

Works With Alexa

To integrate with Amazon Alexa:

1. Open the Alexa App and navigate to the menu (☰).
2. Go to "Skills".
3. Search for "Tuya Smart" or "Smart Life" and select it.
4. Tap "Enable to Use".
5. Log in with your Tuya Smart or Smart Life account credentials to link it to your Amazon account. Select your country if using a phone number, or a random region code if using an email address.

Voice Commands:

• "Alexa, turn on {device name}"
• "Alexa, turn off {device name}"

Visuals of Amazon Echo devices.

Works With Google Home

To integrate with Google Assistant:

1. Launch the Google Home app and tap the menu (☰).
2. Tap "Home control".
3. Under "Devices", tap the "+" icon.
4. Search for and select "Tuya Smart" or "Smart Life".
5. Log in with your Tuya Smart or Smart Life account credentials to link it to your Google account. Select your country if using a phone number, or a random region code if using an email address.

Voice Commands:

• "Hey Google, turn on {device name}"
• "OK Google, turn off {device name)"

Visuals of Google Home devices.

Works With IFTTT

To integrate with IFTTT:

1. Launch the IFTTT app and tap "Search".
2. Search for "Tuya Smart" or "Smart Life" and navigate to their service page.
3. Log in to link your account.
4. Go to "My Applets" and tap "+" to create your own applets.

Visual of the IFTTT logo.

Support and Conclusion

Installation is designed to be quick and easy, typically taking about 30 minutes to complete.

For additional installation instructions or support, please contact iSecus.

Thank you for purchasing the Garage Door controller!