Zigbang SHP-P51 Smart Door Lock User Manual
Safety Precautions
Warning: Read and follow all safety precautions to prevent accidents and property damage.
- Do not install or repair the product arbitrarily.
- Do not install if the gap between the door and frame is 5mm or more.
- Manage your PIN carefully to prevent others from knowing it, and change it periodically.
- Do not operate the product with wet hands, and prevent liquids like water or beverages from entering the product.
- Do not press the door lock buttons excessively or use sharp tools to press them.
- Always ensure the door is fully locked when leaving the house.
- When replacing batteries, replace all of them at once and do not mix old and new batteries.
- Do not install in locations with long-term exposure to direct sunlight, as it may cause cracks on the touchpad.
- Insert batteries carefully and correctly according to the product's polarity (+/-). Incorrect insertion may cause leakage or rupture.
- When cleaning the product, use a soft, dry cloth; do not use water, benzene, or alcohol.
- When the battery replacement alert melody sounds, replace the batteries with new ones immediately.
- This device may cause radio frequency interference and may receive harmful interference from other devices.
- This wireless equipment may cause interference during operation and cannot be used for services related to human safety.
- Battery consumption may increase depending on the wireless communication environment.
- Using the product in environments with heavy condensation may cause performance issues.
Note: The contents of this user manual may be changed without prior notice for product function improvement.
Product Identification
Model: SHP-P51
Manual Number: GC68-02548A
Exterior Components and Functions
The exterior unit features a numeric keypad for PIN entry, a card recognition area for RFID cards or key tags, a proximity sensor for detecting user approach, and a handle for opening the door. It also includes an emergency power contact point and indicator lamps for door lock status, double lock status, and battery replacement alerts.
- Numeric Keypad: For entering PIN codes.
- Card Recognition Area: For tapping RFID cards or key tags.
- Proximity Sensor: Detects user presence to activate the keypad.
- Handle: For opening the door after authentication.
- Emergency Power Contact: For connecting an external 9V battery.
- Indicator Lamps: Visual cues for door locked status, double lock status, and battery replacement alerts.
Interior Components and Functions
The interior unit includes a reset button, a battery cover release button, a volume control switch, an automatic/manual lock switch, a deadbolt mechanism, a latch bolt, and a door open sensor. It also has an 'Ansimi' (Safety) button.
- Reset Button: Used for system resets and initial setup.
- Battery Cover Release Button: Allows access to the battery compartment.
- Volume Control Switch: Adjusts the sound level of keypresses and alerts.
- Auto/Manual Lock Switch: Selects between automatic locking upon door closure and manual locking.
- Deadbolt: The primary locking mechanism.
- Latch Bolt: The spring-loaded bolt that keeps the door closed.
- Door Open Sensor: Detects if the door is open or closed.
- Ansimi (Safety) Button: For manual locking and other safety functions.
Mortise Components
The mortise is the internal mechanism that fits into the door edge. It includes the handle shaft, installation screws, strike plate, strike box, registration button, safety button, and springs for handle operation.
Key Features
- Welcome Function: Automatically activates authentication standby when a user approaches the door.
- Manner Function: Temporarily mutes key input and door opening sounds for quiet entry.
- Card Auto-Recognition: Convenient card reading without needing to touch the keypad first.
- Dual Authentication: Requires both card and PIN for enhanced security.
- Home Safety Function: Blocks external unlocking when someone is inside.
- Fire Detection Function: Automatically unlocks the door when high temperatures are detected.
Operation Instructions
Opening Door from Outside (PIN)
Touch the numeric keypad to activate it. If the door is in Dual Security Mode, press two specific illuminated numbers first. Then, enter your PIN code followed by the [*] button. To use the Manner Mode for quiet entry, press the [*] button before entering the PIN.
Note: Entering the PIN incorrectly 5 consecutive times will result in a 3-minute lockout.
Opening Door from Outside (Card/Key Tag)
Touch the registered card or key tag to the card recognition area. The door will unlock after a brief moment.
Opening Door from Inside
Push the interior handle to open the door.
Changing PIN
Open the battery cover. Press the [REG.] button. Enter the new PIN (4-12 digits) and press the [*] button. A confirmation beep will sound upon success. Only one PIN can be registered. It is recommended to use a PIN of 6 digits or more and change it periodically.
Registering Cards/Key Tags
Open the battery cover. Press the [REG.] button. Touch the card/key tag to the recognition area. Repeat for all cards/key tags within 20 seconds. Press the [REG.] button on the interior unit to finish. Note that all existing registrations are erased when starting this process. A maximum of 20 cards/key tags can be registered. Only Zigbang-provided key tags are supported.
Resetting All Settings
Open the battery cover. Press and hold the [REG.] button for 3 seconds. Enter '4560852580' on the keypad and press [*]. A confirmation beep will sound upon success. After reset, the PIN defaults to '1234', and all cards/key tags/remote controls need re-registration.
Door Lock Status Check
Briefly press the 'Ansimi' button on the interior unit. A red LED indicates the door is locked; a blue LED indicates it is unlocked.
Advanced Functions
Dual Security Mode
Enhances security by requiring two specific numbers to be illuminated and pressed before PIN entry. This mode helps prevent PIN exposure. To set: Open battery cover, press [REG.]. Press [7] then [] to set; press [9] then [] to unset.
Auto/Manual Lock Setting
Allows setting the door to lock automatically 1 second after closing (Auto) or requiring manual locking via the 'Ansimi' button or keypad (Manual). To set: Open battery cover, move the Auto/Manual switch to 'A' (Auto) or 'M' (Manual).
Door Closing Time Setting
Adjusts the delay before the deadbolt engages after the door is closed, useful for doors that close slowly to prevent jamming. To set: Open battery cover, press [REG.]. Press [51] to [59] for 1 to 9 seconds delay, then press [].
Intrusion Detection
Generates an alarm and temporarily disables the lock if the door is forced open from the outside. The alarm sounds for 5 minutes, and the exterior indicator flashes.
Fire Detection
Detects high temperatures (around 70°C ± 10°C) and triggers an alarm, flashing the red LED on the 'Ansimi' button. The door automatically unlocks after the alarm stops.
Emergency Battery Use
If batteries are depleted, a 9V battery (sold separately) can be connected to the external power contact point to temporarily power the lock for entry. Connect the 9V battery to the exterior contact point, then use PIN or card/key tag.
Battery Replacement
When the battery replacement alert melody sounds ('Für Elise'), replace all batteries immediately with new ones. Using the lock with low batteries can prevent normal operation. Check batteries periodically (e.g., every 6 months) for leakage.
Manner Mode
Press the [*] button before entering the PIN to temporarily mute keypress sounds and door opening sounds.
Welcome Function
The keypad automatically activates and enters standby mode when a user approaches the door, without needing to touch the keypad first. To set: Open battery cover, press [REG.]. Press [1]+[] to set Welcome & 1-min alarm, [2]+[] to set Welcome & disable alarm (default), [3]+[] to unset Welcome.
Home Safety Function
Prevents the door from being unlocked from the outside when activated from the inside. This is a security feature for when residents are home. To set: Press and hold the 'Ansimi' button for 3 seconds from the inside when locked. To unset: Push the interior handle to open the door.
Anti-Burglar Function
Activates an alarm if the door is operated from the inside while in 'outbound security' mode. The exterior indicator flashes, and an alarm sounds for 5 minutes. To set: After locking, press the [ ] button on the keypad within 3 seconds.
External Forced Unlock Prevention
A mechanical lock that prevents forced opening from the outside by securing the handle. This feature should only be used when no one is inside, as it can make it difficult for the elderly to open the door. To set: After setting the Anti-burglar function, press the [] button within 3 seconds. To unset: Press the 'Ansimi' button inside to release the mechanical lock, then push the handle.
Volume Control
Adjusts the sound level for key presses and door operations. Options range from mute (excluding alarms) to loud. To set: Open battery cover, set the volume switch to [0] (mute), [1] (low), or [2] (high), then close the cover.
Specifications
| Item | Specification |
|---|---|
| Rated Voltage | AA Alkaline Batteries (LR6) 1.5V x 4 (DC 6V) |
| Emergency Power | 9V Battery (6LF22) x 1 (sold separately) |
| Operation Method | Electronic control (PIN entry or Card/Key Tag recognition) |
| Weight | 4.1 kg (including exterior and interior units) |
| Dimensions (with handle) | Exterior: 88.1mm (W) x 392.4mm (H) x 64.5mm (D) |
| Interior: 88.5mm (W) x 357.6mm (H) x 69.3mm (D) |
RF Specifications
| Item | Frequency Band | Radio Wave Type | Modulation Type | Communication Type | Usage Type |
|---|---|---|---|---|---|
| RFID | 13.56MHz | A1D | ASK | Simplex | Security System |
| 447.2750MHz | F1D | FSK | Simplex | Wireless Data Communication System | |
| Zigbee | 2.4GHz | G1D | QPSK | Repeated Simplex |
Product Certification
Equipment Name: Specific Low Power Radio Equipment (Security System Radio Equipment), Specific Low Power Radio Equipment (Wireless Data Communication System Radio Equipment)
Model Name: SHP-P51
Certified Company: Zigbang Co., Ltd.
Manufacturer/Country of Origin: SOLITY VINA CO.,LTD./Vietnam
Certification Numbers: R-C-SDS-SHP-DP720A, R-C-SDS-SHP-DP720AG
Warranty Information
This warranty is valid only in Korea (Republic of Korea) and will not be reissued. Please keep it together with the user manual.
Service: Zigbang Co., Ltd. provides product warranty according to the Consumer Dispute Resolution Standards (Notified by the Fair Trade Commission).
In case of product malfunction: Contact your dealer. If dealer contact is not possible, contact the Zigbang Customer Center.
For free service without a manufacturing number: Proof of warranty or purchase receipt is required. Please check the manufacturing number upon purchase.
1) Non-Malfunction Cases (Service Fees May Apply):
- Requests for service when the product is not malfunctioning.
- Improper installation due to relocation or moving.
- Installation issues caused by customer's lack of skill.
- Customer unfamiliarity with usage methods (PIN, card, remote registration, etc.).
- Damage caused by foreign substances (coffee, milk, drinks, water, etc.) entering the product.
- Network or third-party program usage instructions.
- Re-installation required due to poor installation by the seller (excluding products purchased from Zigbang sales or designated stores).
2) Malfunctions Due to Consumer Negligence (Paid Service):
- Malfunctions caused by careless handling, unauthorized repair, or modification.
- Damage caused by external impact or drops.
- Malfunctions caused by repair by unauthorized personnel other than authorized dealers or Zigbang customer center technicians.
- Malfunctions caused by using incorrect electrical capacity.
- Malfunctions caused by using non-designated consumables or optional parts.
- Malfunctions caused by not following the 'Precautions' in the user manual.
3) Other Cases:
- Malfunctions due to natural disasters (lightning, fire, flood, etc.).
- Use with unstable power sources that cannot protect against surge voltage.
- End of lifespan for consumable parts (e.g., batteries).
Free service is available only for product malfunctions within 1 year of purchase (product warranty period). If the product is converted for commercial use, the warranty period is halved.
Consumer Damage Compensation Details:
- Within Warranty Period:
- For critical defects within 10 days of purchase: Exchange or refund.
- For critical defects within 1 month of purchase: Product exchange or free repair.
- For the same defect occurring up to 2 times: Free repair.
- For the same defect occurring up to 3 times: Product exchange or refund.
- For different defects occurring up to 5 times: Product exchange or refund.
- If repair is impossible (parts available): Product exchange or refund.
- If repair is impossible (parts unavailable, within parts availability period): Product exchange or refund, plus 5% of purchase price added to depreciated value.
- After Warranty Period:
- If repair is possible: Paid repair.
- If repair is impossible: Paid repair, then product exchange with depreciation applied.
Disclaimer: This product is for use in Korea only. If this product is used in countries outside of Korea, (1) Some functions of this product may be limited, restricted, or not be available, (2) The warranty policies shall not be applicable, and (3) After-sales (A/S) services may be limited, restricted, or not be available.
