Manuals+

TC22 and TC27 Accessories Guide

The ultimate cost-effective tool for small businesses -- with big business features

Revised August 2025

Brand: Zebra

Introduction

This guide details the accessories available for the Zebra TC22 and TC27 mobile computers, designed to enhance productivity, protection, and power management for small businesses.

I. Accessories that POWER devices

1 Cradles

Single-slot charger cradle

SKU#: CRD-TC2L-BS1CO-01

Single-slot charge-only cradle for one TC22 / TC27 device.

  • Charges standard capacity battery from 0 to 80% in less than 2 hours 20 minutes.
  • Charges extended capacity battery from 0 to 80% in less than 3 hours 10 minutes.
  • Compatible with TC22 / TC27 units with hand straps, trigger handle or protective boot when shim is removed.

Sold separately: Requires power supply SKU# PWR-WUA5V12W0XX and USB-C cable SKU# CBL-TC5X-USBC2A-01.

Single-slot USB / Ethernet charger cradle

SKU#: CRD-TC2L-SE1ET-01

Single-slot charger and USB cradle. Charges a single device.

  • Charges standard capacity battery from 0 to 80% in less than 1 hour 20 minutes.
  • Charges extended capacity battery from 0 to 80% in less than 1 hour 50 minutes.
  • Compatible with TC22 / TC27 units with hand straps, trigger handle or protective boot when shim is removed.

Sold separately: Power supply SKU# PWR-BGA12V50W0WW, DC cable SKU# CBL-DC-388A1-01, and country-specific AC line cord. To charge and sync using USB port with a computer, purchase USB cable SKU# 25-124330-01R. To connect to Ethernet, purchase USB-to-Ethernet module SKU# MOD-MT2-EU1-01 with bracket SKU# BRKT-TC51-ENET1-02.

Single-slot device and battery charger cradle

SKU#: CRD-TC2L-BS11B-01

Single-slot charger charges a TC22 / TC27 device and its spare Li-Ion battery.

  • Charges Standard battery in device from 0 to 80% in less than 1 hour 20 minutes.
  • Charges Extended battery in device from 0 to 80% in less than 1 hour 50 minutes.
  • Compatible with TC22 / TC27 units with hand strap, trigger handle, or protective boot when shim is removed.

Sold separately: Power supply SKU# PWR-BGA12V50W0WW, DC cable SKU# CBL-DC-388A1-01, and country-specific AC line cord.

1.2 Multi-slot cradles

Five-slot charger cradle

SKU#: CRD-TC2L-BS5CO-01

Multi-slot cradle to charge up to five TC22 / TC27 devices.

  • Charges Standard Capacity battery from 0 to 80% in less than 1 hour 20 minutes.
  • Charges Extended Capacity battery from 0 to 80% in less than 1 hour 50 minutes.
  • Compatible with TC22 / TC27 units with hand straps, trigger handle, or protective boot when shim is removed.
  • Can be rack-mounted in a standard 19-inch server rack via mounting bracket SKU# BRKT-SCRD-SMRK-01.

Sold separately: Power supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, and country-specific AC line cord.

Five-slot charge / Ethernet cradle

SKU#: CRD-TC2L-SE5ET-01

Five-slot charge / Ethernet cradle. Charges five devices with network speeds of up to 1Gbps.

  • Charges Standard Capacity battery from 0 to 80% in less than 1 hour 20 minutes.
  • Charges Extended Capacity battery from 0 to 80% in less than 1 hour 50 minutes.
  • Compatible with TC22 / TC27 units with hand straps, trigger handle, or protective boot when shim is removed.
  • Can be rack-mounted in a standard 19-inch server rack via mounting bracket SKU# BRKT-SCRD-SMRK-01.

Sold separately: Power supply SKU# PWR-BGA12V108W0WW, DC cable SKU# CBL-DC-381A1-01, and country-specific AC line cord.

1.3 Cradle cups

Device cradle cup replacement kit

SKU#: CRDCUP-TC2L1C-01

One TC22 / TC27 device cradle cup replacement kit. Can be used to replace another device's cup purchased after 2019 on ShareCradle when upgrading to TC22 / TC27.

  • Also available as a 5-pack -- 5 device cradle cups -- SKU# CRDCUP-TC2L5C-01.
  • Not all five cups need to be used, therefore creating a multi-slot cradle supporting a mixed combination of devices (e.g., two TC22 / TC27 and three TC5X devices).

Charge and communication device cradle cup replacement kit

SKU#: CRDCUP-TC2L1E-01

One TC22 / TC27 charge and USB / Ethernet connection device cradle cup replacement kit. Can be used to replace another device's cup purchased after 2019 on ShareCradle when upgrading to TC22 / TC27.

  • Also available as a 5-pack -- 5 device cradle cups -- SKU# CRDCUP-TC2L5C-01.
  • Not all five cups need to be used, therefore creating a multi-slot cradle supporting a mixed combination of devices (e.g., two TC22 / TC27 and three TC5X devices).

1.4 Mounting options for chargers

Rack mounting for space optimization

Optimize available space by mounting any set of five-slot chargers for TC22 / TC27 on a standard, 19-inch server rack.

  • Ideal for customers that have several devices per location.
  • Compatible with all five-slot chargers for TC22 / TC27.

Mounting bracket

SKU#: BRKT-SCRD-SMRK-01

Use five-slot ShareCradle mounting bracket to attach five-slot TC22 / TC27 cradles to the wall or mount on a 19-inch server rack.

  • Offers cable routing slots and removable tray that stores / conceals power supply.
  • Adjustable orientations:
    • 25º angle for high-density (five-slot chargers).
    • Horizontal (single-slot or four-slot spare Li-ion charger).
  • Four 4-slot spare battery chargers can be mounted as shown with mounting bracket.
  • Use to mount to wall or with standard 19-inch server rack for more density and save space.

2 Batteries

2.1 Spare Li-on Bluetooth batteries

SKU#: BTRY-TC2L-2XMAXB-01

Standard capacity 3,800mAh PowerPrecision Li-Ion Battery with BLE Beacon.

  • Premium-grade battery cells with longer lifecycle and tested to meet rigorous controls and standards.
  • BLE beacon allows device with this battery to be located even if powered off using Zebra Guardian.

Sold separately: Zebra Device Tracker licenses for either 1-year SKU# SW-BLE-DT-SP-1YR or 3-years SKU# SW-BLE-DT-SP-3YR.

2.2 Spare Li-ion batteries

SKU#: BTRY-TC2L-2XMAXX-01

Standard capacity 3,800 mAh PowerPrecision Li-ion Battery.

  • Premium-grade battery cells with longer lifecycle and tested to meet rigorous controls and standards.

2.3 Spare battery chargers

SKU#: BTRY-TC2L-3XMAXX-01

Extended capacity 5,200 mAh PowerPrecision Li-ion battery.

  • Premium-grade battery cells with longer lifecycle and tested to meet rigorous controls and standards.

3 Power supply, cables, and adapters

3.1 Power supply and cable matrix

SKU# Description Note
PWR-BGA12V108W0WW Level VI AC/DC power supply brick. AC Input: 100-240V, 2.8A. DC Output: 12V, 9A, 108W. Sold separately. Use for: CRD-TC2L-BS5CO-01, CRD-TC2L-SE5ET-01
CBL-DC-381A1-01 DC line cord for running multi-slot cradles from a single Level VI power supply. Sold separately. Use for: CRD-TC2L-SE1ET-01, CRD-TC2L-BS11B-01, SAC-TC2L-4SCHG-01
PWR-BGA12V50WOWW Level VI AC/DC power supply brick. AC Input: 100-240V, 2.4A. DC Output: 12V, 4.16A, 50W. Sold separately. Use for: CRD-TC2L-SE1ET-01, CRD-TC2L-BS11B-01, SAC-TC2L-4SCHG-01
CBL-DC-388A1-01 DC line cord for running single-slot cradles or battery chargers from a single Level VI power supply. Sold separately. Use for: CRD-TC2L-SE1ET-01, CRD-TC2L-BS11B-01, SAC-TC2L-4SCHG-01
CBL-TC2X-USBC-01 USB-A to USB-C cable with an additional ferrite bead. Sold separately: Country-specific AC line cord.
KIT-PWR-12V50W Power supply kit for single-slot cradle including Power Supply SKU# PWR-BGA12V50WOWW and DC line cord SKU# CBL-DC-388A1-01.
CBL-DC-382A1-01 DC line cord for running five-slot cradles when using Level VI Efficiency power supply SKU# PWR-BGA12V108W0WW. Includes black extension tab for releasing the cable.
CBL-TC5X-USBC2A-01 USB C to USB A communications and charging cable, 1m long Sold separately. Use to: Directly charge TC22 / TC27 using a wall wart; Connect TC22 / TC27 to a computer (developer tools); Charge TC22 / TC27 in a vehicle (can be used with cigarette light adapter SKU# CHG-AUTO-USB1-01, if needed)
CBL-TC2Y-USBC90A-01 USB C to USB A cable with 90° bend in USB-C adapter Sold separately. Required for use with SKU# CRD-TC2L-SE1ET-01 if syncing with a computer is desired while TC22 / TC27 is in the charger.
25-124330-01R Micro USB active-sync cable for use with Single Slot USB/ Communication Cradle. Sold separately. Use to: Consolidate power supplies for multiple spare battery chargers proximally placed to each other.
CBL-DC-523A1-01 DC Y-line cord for running two 4-slot battery chargers to a single Level VI power supply SKU# PWR-BGA12V108WOWW. Sold separately. Use with a communications & charge cable to directly charge TC22/TC27 device drawing power from a wall socket.
PWR-WUA5V12W0XX USB type A power supply adaptor (wall wart). Replace 'XX' in SKU as follows to get the right plug style based on region: US (United States). GB (United Kingdom) EU (European Union) AU (Australia) • CN (China)• IN (India) • KR (Korea). BR (Brazil)

3.2 Country-specific AC line cords: grounded, 3-prong

SKU# Country / region Note
23844-00-00R North America (United States, Canada, Mexico) 7.5 feet long. Commonly used with chargers mounted in server racks.
50-16000-678R North America (United States, Canada, Mexico) 3 feet long
50-16000-221R North America (United States, Canada, Mexico) 6 feet long
50-16000-727R Brazil 1.8 meters (6 feet) long
50-16000-680R Argentina 1.8 meters (6 feet) long
50-16000-217R American Samoa, Australia, New Guinea 1.8 meters (6 feet) long
50-16000-218R Japan 1.8 meters (6 feet) long
50-16000-219R Antigua, Bermuda, Burma, Channel Islands, Hong Kong, Iraq, Ireland, Malaysia, North Ireland, Scotland, Singapore, United Kingdom, Wales 1.8 meters (6 feet) long
50-16000-257R China 1.8 meters (6 feet) long
50-16000-220R Europe, Abu Dhabi, Bolivia, Dubai, Egypt, Iran, Korea, Russia, Vietnam 1.8 meters (6 feet) long
50-16000-671R Italy 1.8 meters (6 feet) long
50-16000-669R India, S. Africa, Africa 1.8 meters (6 feet) long

Country-specific AC line cords: ungrounded, 2-prong

SKU# Country / region Note
50-16000-182R United States Type A NEMA 1-15 plug
50-16000-255R Europe, Abu Dhabi, Bolivia, Dubai, Egypt, Iran, Korea, Russia, Vietnam. Type C CEE7/16 plug
50-16000-670R Bermuda, Hong Kong, Iraq, Ireland, Malaysia, Singapore, United Kingdom.

II. Accessories that ENABLE productivity solutions

4 Headsets

4.1 Wired headsets and accessories for Workcloud Sync

SKU#: HDST-USBC-PTT1-01

PTT headset with USB-C connector; one-piece solution.

  • For Push-To-Talk (PTT) applications with volume up/volume down/PTT buttons. Compatible with PTT Express/PTT Pro.
  • Rotating earpiece allows for right or left ear configuration. Mono headset with microphone.
  • Includes clip for attaching PTT button to clothing.

4.1 Wired headsets for Workcloud Sync (3.5mm)

SKU#: HDST-35MM-PTVP-02

PTT and VoIP headset with 3.5mm standard jack.

  • For Push-To-Talk (PTT) and VoIP telephony. Compatible with PTT Express/PTT Pro.
  • Rotating earpiece allows for right or left ear configuration. Mono headset with microphone.
  • Includes clip for attaching PTT button to clothing.
  • Requires adapter SKU# ADP-USBC-35MM1-01.

4.2 Wired headsets and accessories for voice-directed picking

HS2100 rugged wired headset

Corded HD voice headset. Can be used with TC22/TC27 devices with adapters SKU# CBL-HS2100-3MS1-01 and SKU# ADP-USBC-35MM1-01.

  • Dustproof, spray proof, and waterproof.
  • Noise cancellation for a superior voice experience in the noisiest environments.
  • Swiveling boom mutes microphone allowing user to prevent voice pick applications from recognizing non-voice pick conversations.
  • Feather-light for extraordinary comfort.
SKU# Description
HS2100-OTH HS2100 Rugged Wired Headset Over-The-Head Headband includes HS2100 Boom Module and HSX100 OTH Headband Module
HS2100-BTN-L HS2100 Rugged Wired Headset (Behind-the-neck headband left)
HS2100-OTH-SB HS2100 Rugged Wired Headset (Over-the-head headband) includes HS2100 Shortened Boom Module and HSX100 OTH headband module
HS2100-BTN-LSB HS2100 Rugged Wired Headset (Behind-the-neck headband left) includes HS2100 Shortened Boom Module and HSX100 BTN headband module

4.3 Wireless headsets and accessories for voice-directed picking

HS3100 rugged Bluetooth headset

Bluetooth headset for voice-directed picking applications.

  • Noise cancellation tuned for Voice-Directed Picking applications.
  • Swap batteries on the fly — without losing the Bluetooth connection.
  • Split-second tap-to-pair simplicity using NFC. 15 hours of battery power.
SKU# Description
HS3100-OTH HS3100 Bluetooth Headset Over-The-Head Headband includes HS3100 Boom Module and HSX100 OTH Headband Module
HS3100-BTN-L HS3100 Bluetooth Headset (Behind-the-neck headband left)
HS3100-OTH-SB HS3100 Bluetooth Headset (Over-the-head headband) includes HS3100 Shortened Boom Module and HSX100 OTH headband module
HS3100-BTN-LSB HS3100 Bluetooth Headset (Behind-the-neck headband left) includes HS3100 Shortened Boom Module and HSX100 BTN headband module
HS3100-SBOOM-01 HS3100 Shortened Boom Module (includes microphone boom, battery and windscreen)

4.4 Cables and adapters

Cigarette lighter adapter plug

SKU#: CHG-AUTO-USB1-01

USB cigarette lighter adapter plug.

  • Used with USB C Cable SKU# CBL-TC5X-USBC2A-01 (sold separately) to provide in-vehicle charging.
  • Includes two USB-A ports providing higher current (5V, 2.5A) for faster charging.
HS2100 Standard cable

SKU#: CBL-HS2100-3MS1-01

HS2100 headset standard cable – 3.5mm jack.

  • 3.5mm barrel jack connector with cable length 43 inches or 1.1 meters.
  • For use with TC22 / TC27 or other devices using a 3.5mm barrel jack audio connector. Requires SKU# ADP-USBC-35MM1-01.
  • Rugged cable with rugged connectors that are keyed / collared for a locking failsafe connection.
  • Includes one clothing clip. Additional clips can be purchased separately.
Adapter cable

SKU#: ADP-USBC-35MM1-01

USB-C to 3.5mm adapter cable.

  • Allows headsets with 3.5mm jack to be connected to TC22/TC27.
  • Adapter provides push-to-talk (PTT) button, volume up / down buttons.
  • Adapter cable length is about 2.5 feet or 78 centimeters.
  • Clip on rear of adapter allows cable to be wrapped for length management.
  • PTT button functionality tested with headset SKU# HDST-35MM-PTVP-02 where both the PTT button the headset and the adapter may be used.
Snap-On USB Charge-Only Cable Adapter

SKU#: ADPTR-TC2L-USBC-01

  • Connects to charge contacts on the bottom of the device.
  • Only provides charging supports, no USB communication.
  • Compatible with devices with rugged boots by removing the shim.
  • Cable length is 7 inches (17.78 cm).

5 Wearable mounts and other accessories

5.1 Arm / wrist mounts

Arm mount with medium size length strap

SKU#: SG-TC2L-ARMNT-01

Arm mount with medium size length strap.

  • Enables the TC22 / TC27 to be mounted to the arm for hands free operation and can be used with the RS5100 / RS6100 (or similar) ring scanner.
  • Compatible with Standard or Extended Capacity battery.
  • Not compatible with Rugged Boot.
  • Includes: Medium length (30cm or 12 inches) Velcro wrist strap SKU# SG-TC2L-ARMSTRAP-01 and carrier comfort pad SKU# SG-TC2L-CMPD-01.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

Arm mount with large size length strap

SKU#: SG-TC2L-ARMNT-02

Arm mount with large size length strap.

  • Enables the TC22 / TC27 to be mounted to the arm for hands free operation and can be used with the RS5100 / RS6100 (or similar) ring scanner.
  • Compatible with Standard or Extended Capacity battery.
  • Not compatible with Rugged Boot.
  • Includes: Large sized (33cm or 13 inches) Velcro wrist strap SKU# SG-TC2L-ARMSTRAP-02 and carrier comfort pad SKU# SG-TC2L-CMPD-01.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

Arm mount with extended length strap

SKU#: SG-TC2L-WMADP1-02

  • Wrist mount with extended BOA dial-to-fit wrist strap.
  • Swivel design allows device to be viewed in portrait or landscape mode enabling hands-free functionality.
  • Velcro-free design uses non-absorbent materials that can be wiped down.
  • Strap length can be adjusted between 164 to 265mm (approx. 6.5 to 10.5").
  • Not compatible with Rugged Boot.
  • Includes: Carrier, Comfort Pad SKU# SG-TC2L-CMPD-01 and medium / large sized wrist strap SKU# SG-NGWT-WSTPLN-01.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

5.2 Replacement straps and arm sleeve

BOA Replacement wrist strap – standard size

SKU#: SG-NGWT-WSTPST-01

  • White dial and accent color on strap identify size as standard (small / medium).
  • Strap length can be adjusted between 128 to 191mm (approx. 5.0 to 7.5").

Please note this accessory is a consumable and may require replacement during the device's lifespan.

BOA Replacement wrist strap – extended size

SKU#: SG-NGWT-WSTPLN-01

  • Black dial and accent color on strap identify size as extended (medium / large).
  • Strap length can be adjusted between 164 to 265mm (approx. 6.5 to 10.5").

Please note this accessory is a consumable and may require replacement during the device's lifespan.

BOA Replacement wrist strap – extra-large size

SKU#: SG-NGWT-WSTPXL-01

  • Blue dial and accent color on strap identify size as extra-large.
  • Strap length can be adjusted between 218 to 375 mm (approx. 8.5 to 14.75").

Please note this accessory is a consumable and may require replacement during the device's lifespan.

Arm sleeve

SKU#: SG-WT4027050-01R

Arm sleeve – pack of 5.

  • Worn under wrist mount strap if worker is in short-sleeved shirt and wants extra sweat wicking / personal layer, comfort and slip-resistance.
  • Material will not snag. One size fits all.
  • Washable in mild detergent. Should be air dried.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

5.3 Replacement straps, hand strap, and comfort pad

Medium Velcro Replacement Strap

SKU#: SG-TC2L-ARMSTRAP-01

Replacement arm strap – size medium.

  • Replaces the Velcro strap included for SKU# SG-TC2L-ARMNT-01.
  • Comes in size large with strap length of 300mm or 12″.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

Large Velcro Replacement Strap

SKU#: SG-TC2L-ARMSTRAP-02

Replacement arm strap – size large.

  • Replaces the Velcro strap included for SKU# SG-TC2L-ARMNT-02.
  • Comes in size large with strap length of 330mm or 13″.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

Hand strap

SKU#: SG-TC2L-HSTRP1-01

Hand strap.

  • Allows device to be easily held in palm of hand.
  • Attaches directly to device, even with rugged boot installed.
  • Sold separately: Rugged boot SKU# SG-TC2L-BOOT-01.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

Replacement Comfort Pad

SKU#: SG-TC2L-CMPD-01

Comfort Pad for Arm Mount.

  • Replaces the Comfort Pad included on either SKU# SG-TC2L-ARMNT-01 or SKU# SG-TC2L-ARMNT-02 or SKU# SG-TC2L-WMADP1-02.
  • Soft Rubber material.
  • Easily removable and hygienic.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

5.4 Stylus and Tether

Stylus

SKU#: SG-STYLUS-TCX-MTL-03

Fiber tipped stylus – pack of 3.

  • Heavy-duty and made from stainless steel / brass. No plastic parts -- real pen feel. Can be used in rain.
  • Micro-knit, hybrid-mesh, fiber tip provides silent, smooth gliding use. 5" length.
  • Big improvement over rubber tipped or plastic tipped stylus.
  • Compatible with all capacitive touch screen devices.
  • Tether to device or hand strap using SKU# SG-TC5NGTC7NG-TETHR-03.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

Stylus tether

SKU#: SG-TC5NGTC7NG-TETHR-03

Stylus tether.

  • Can be attached to device tower bar.
  • String type tether prevents loss of stylus.
  • This tether is recommended when using Fiber Tipped Stylus (SG-STYLUS-TCX-MTL-03).

Please note this accessory is a consumable and may require replacement during the device's lifespan.

6 Trigger handles

6.1 Electronic trigger handle

SKU#: TRG-TC2L-SNP1-01

Pistol-grip trigger handle.

  • Uses electrical trigger via contacts on back side of TC22 / TC27.
  • Trigger handle accessory offers customers the option of using the product in a gun form factor, ideal for scan-intensive operations.
  • Requires rugged boot SKU# SG-TC2L-BOOT-01.
  • Does not block access to rear facing camera and flash allowing camera to be used while using the trigger handle.
  • Compatible with both standard and extended capacity batteries.
  • Not compatible with Hand Strap.

Wrist Strap

SKU#: 50-12500-066

  • Attaches to bottom of Snap-on Trigger Handle (SKU# TRG-TC2L-SNP1-01).

Please note this accessory is a consumable and may require replacement during the device's lifespan.

III. Accessories that PROTECT devices

7 Soft holsters, rugged boots, and screen protectors

7.1 Rugged boot

SKU#: SG-TC2L-BOOT-01

Rugged protective boot.

  • Boot increases drop spec of device to 5 ft. (1.5 m) and drop surface to concrete.
  • Compatible with devices using Standard or Extended Capacity battery.
  • Compatible with Hand Strap.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

Screen protector

SKU#: SG-TC2L-SCRNPT1-01

Screen protector.

  • Tempered glass.
  • Includes: Alcohol wipes, cleaning cloth, and instructions needed for screen protector installation.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

Soft holster

SKU#: SG-TC2L-HLSTR1-01

Soft holster.

  • Vertical orientation with open bucket design to accommodate TC22 / TC27 with optional trigger handle SKU# TRG-TC2L-SNP1-01.
  • Compatible with rugged boot SKU# SG-TC2L-BOOT-01 and hand strap SKU# SG-TC2L-HSTRP1-01.
  • Opening at bottom of holster for providing drainage and route for audio from device's speaker.
  • Nonrotating for maximum durability.
  • Compatible with devices using Standard or Extended Capacity battery.

Please note this accessory is a consumable and may require replacement during the device's lifespan.

IV. Workstation Connect Cradle

8 TC22 and TC27 Connect Cradle

Introducing the new Connect Cradles (Workstation and Point of Sale) for TC22 and T27 mobile computers. These accessories allow for the TC22 and TC27 mobile computer to connect to multiple purpose-built peripherals and enable Zebra Workstation Connect on an external monitor. The Connect Cradle offers connections for standard workstation setups (monitor, keyboard, mouse) while the point-of-sale configuration provides three additional powered USB ports for setups utilizing POS-specific peripherals such as a payment terminal, receipt printer, or scanner.

Connect Cradles

SKU#: CRD-TC2L-1SNWS-01 | SKU#: CRD-TC2L-1SNHP-01

Workstation | Point of Sale

  • Workstation (SKU #CRD-TC2L-1SNWS-01): This connect cradle allows users to use TC22 and TC27 device as a workstation or kiosk. Includes HDMI, Ethernet, USB-A (x4) ports, shims, and 3.5mm headset jack. Power supply, DC line cord and AC line cord are all sold separately.
  • Point of Sale (SKU# CRD-TC2L-1SNHP-01): This connect cradle allows users to use the TC22 and TC27 devices as a Point of Sale terminal. Includes HDMI, Ethernet, USB-A (x3), 24V Powered USB (x1), 12V Powered USB (x2) ports, shims, and 3.5mm headset jack. Power supply and AC line cord are all sold separately.

Power Supply & DC Line Cord for Workstation Connect Cradle

SKU#: PWR-BGA12V50W0WW | SKU#: CBL-DC-388A2-01

Power Supply | DC Line Cord

  • Power Supply PWR-BGA12V50W0WW for Connect Cradle : 100-240 VAC, 12VDC, 4.16A.
  • DC Line Cord CBL-DC-388A2-01 for above power supply: 12 VDC, 4.16A 1.8m length.
  • Requires: Country Specific AC grounded line cord.

Power Supply for Point-of-Sale Cradle

SKU#: PWR-BGA24V150W1WW

Power Supply for POS Cradle

  • Level VI AC/DC Power Supply Brick. AC Input: 100-240V, 2.0A. DC Output: 24V, 6.25A, 150W.
  • Requires: Country Specific AC grounded line cord.

V. Third Party Accessories for TC22/27

9 3rd Party Accessories for TC22 / 27

Note: Products sold that do not bear the Zebra brand name are serviced and supported exclusively by their manufacturers in accordance with terms and conditions packaged with the products. Zebra's Limited Warranty does not apply to products that are not Zebra branded, even if packaged or sold with Zebra products. Please contact the manufacturer directly for technical support and customer service.

ProClip Purpose-Built Mounts™ For Zebra TC22/TC27

ProClip cradles provide:

  • Easy one-handed docking and undocking
  • Tilt-swivel gives users an optimized viewing angle
  • Channeled sidewalls guide the device into the cradle and hold the device securely
  • Heavy-duty construction provides protection and longevity
  • Custom design to fit the device with or without the rugged boot
Part # Description
3PTY-PCLIP-712348 Charging Cradle with Cigarette Lighter Plug for Zebra TC22 / TC27 with Rugged Boot
3PTY-PCLIP-712347 Charging Cradle with Cigarette Lighter Plug for Zebra TC22 / 27 (Bare Device)
Part # Description
3PTY-PCLIP-713347 Charging Cradle with Hard-Wired Power Supply for Zebra TC22 / TC27 (Bare Device)
3PTY-PCLIP-713348 Charging Cradle with Hard-Wired Power Supply for Zebra TC22 / TC27 with Rugged Boot
Part # Description
3PTY-PCLIP-711348 Non-Charging Cradle with Tilt-Swivel for Zebra TC22 / 27 with Rugged Boot

RAM® Form-Fit Docks for Zebra TC22 / TC27 Handheld Computers

Protect your investment and stay hands-free in the field with RAM® Mounts spring-loaded docking solutions for the new Zebra TC22 & TC27 handheld computers. These docks are available with and without power, as well as non-locking and key-locking functions. Powered dock options offer a seamless experience by utilizing the device's pogo pad docking contacts and USB Type-A connector -- simply dock the device to keep it charging. Pair with any modular RAM® Mounts components to create a custom mounting solution for your forklift, truck, pick cart and more!

Zebra TC22 / TC27 RAM® Mounts Docks
PART NUMBER KEY LOCK USB TYPE-A POWER FOR BOOT
3PTY-RAM-HOL-ZE24U •
3PTY-RAM-HOL-ZE24PU • •
3PTY-RAM-HOL-ZE24PLU • • •
3PTY-RAM-HOL-ZE24-1U •
3PTY-RAM-HOL-ZE24P-1U • •
3PTY-RAM-HOL-ZE24PL-1U • • •

COMPATIBLE HARDWIRE CHARGER

3PTY-RAM-GDS-CHARGE-V8BU: GDS® 30-64V Hardwire Charger w/ USB Type-A

Product Highlights

  • Pogo Pin Charging: Protect the charge port and increase efficiency utilizing the device's pogo pad docking contacts -- simply dock the TC22/TC27 to keep the device charged. Each powered RAM® dock comes equipped with pogo pin technology for this seamless docking experience.
  • Removable Inserts ('-1U' Part Numbers Only): Part numbers ending in "-1U" indicate docks that include removable inserts. When installed, these inserts retain form-fit docking of the TC22/TC27 when the rugged boot is removed from the device.
  • Stylus Holder: Integrated snap-in stylus holder on all docks prevent lost or dangling styluses when on-the-go.
  • Mount It: With RAM® Compatibility™ customize your mount to your environment. Our recommended mount is the RAM-101U Drill-Down mount.

MOBILIS RUGGED BOOT ZEBRA TC22 - TC27

Increase the lifetime of your TC22 -TC27 device by protecting it with the MOBILIS® rugged boot!

The TC22 - TC27 Zebra is designed for intensive use in environments where drops and shocks are frequent. The MOBILIS® case offers unbeatable protection.

Features:

  • 40X MILITARY STANDARD
  • x1000 DROPS 1m50/5ft
  • AIRCELL SYSTEM: 4 air pockets to absorb shocks. Up to 1000 drops from 1.50m/5ft.
  • RESPONSIVES BUTTONS: High tactile reactivity.
  • ADVANCED RAISED EDGES: Design to protect the screen and camera lens in the event of falls.
  • HAND STRAP READY: Compatible with MOBILIS® hand strap.
  • HOT SWAP BATTERY COMPATIBLE
  • ECO-CONCEPTION: Case made with 30% recycled material & 100% recyclable.

COMPATIBLE DOCKING INSERTS/SHIM ZEBRA

  • Compatible with ZEBRA charging stations: CRD-TC2L-BS1CO-01 / CRD-TC2L-BS11B-01 / CRD-TC2L-SE1ET-01
  • Compatible with ZEBRA multiple charging stations: CRD-TC2L-SE5ET-01 / CRD-TC2L-BS5CO-01
  • Compatible extended battery ZEBRA: BTRY-TC2L-3XMAXX-01

Additional Products for TC22 - TC27

Part # Description
3PTY-MOB-065022 Case only
3PTY-MOB-065030 Trigger compatible
3PTY-MOB-052062 Yellow case + hand strap
Part # Description
3PTY-MOB-036302 SCREEN PROTECTOR
3PTY-MOB-001367 HAND STRAP
3PTY-MOB-031002 HOLSTER M
3PTY-MOB-001084 SHOULDER STRAP
3PTY-MOB-001054 STYLUS PACK OF 10 CAPACITIVE STYLUS WITH SPIRAL CORD
3PTY-MOB-030004 UNIVERSAL WRIST MOUNT ARMBAND 5-7" - HHD

BOOST YOUR BRAND VISIBILITY!

Customize your protective boots with your color and logo

EXPLORE OUR ZEBRA PRODUCTS

Models: CRD-TC2L-BS1CO-01, CRD-TC2L-SE1ET-01, CRD-TC2L-BS11B-01, CRD-TC2L-BS5CO-01, TC22 TC27 Mobile Computers, TC22 TC27, Mobile Computers, Computers

File Info : application/pdf, 27 Pages, 4.44MB

tc22-tc27-guide-accessory-en-us

References

Microsoft PowerPoint for Microsoft 365

Related Documents

Preview Zebra TC22 and TC27 Accessories Guide: Cradles, Batteries, Headsets, and More
Comprehensive guide to accessories for Zebra TC22 and TC27 mobile computers, including charging cradles, batteries, power supplies, headsets, wearable mounts, protective gear, and third-party solutions to enhance productivity and device functionality.
Preview Zebra FR55 Accessories Guide
Explore the comprehensive range of accessories for the Zebra FR55 mobile computer, designed to enhance productivity and protection for first responders. This guide details cradles, batteries, chargers, headsets, mounts, and protective gear.
Preview Zebra ET40 and ET45 Rugged Tablets: Comprehensive Accessories Guide
Explore the full range of accessories for Zebra ET40 and ET45 rugged tablets, including power solutions, protective gear, productivity enhancers, and third-party options. This guide details chargers, cradles, expansion backs, power packs, rugged boots, straps, stands, styluses, headsets, and mounting solutions.
Preview Zebra RS5100 Ring Scanner Accessories Guide
Comprehensive guide to accessories for the Zebra RS5100 Ring Scanner, detailing batteries, charging cradles, and trigger options with part numbers and specifications.
Preview Zebra WS501 Accessories Guide: Enhance Hands-Free Productivity
Comprehensive guide to Zebra WS501 accessories, including charging cradles, batteries, power supplies, cables, and wearable mounts designed to increase productivity through hands-free operation.
Preview Zebra TC73 and TC78 Accessories Guide
Explore the comprehensive range of accessories for Zebra's TC73 and TC78 rugged mobile computers. This guide details power solutions, mounting hardware, headsets, protective gear, and more to enhance device functionality and durability for enterprise use.
Preview Zebra RS5100 Ring Scanner Accessories Guide | Batteries, Chargers, Triggers
Explore the comprehensive range of accessories for the Zebra RS5100 Ring Scanner, including batteries, charging cradles, power supplies, and various trigger and hand mount options.
Preview Zebra MC3400 / MC3450 Accessories Guide - Enhance Your Data Collection
Comprehensive guide to accessories for Zebra MC3400 and MC3450 mobile computers, including cradles, batteries, power supplies, mounting solutions, protection accessories, and more.