POWERTECH MB4102 1024Wh Power Station
Instruction Manual
Warnings & Safety Information
[WARNING]: The manufacturer is not responsible for any potential injury from misuse.
- Read this user manual carefully before using the product to ensure that you completely understand the product and can correctly use it. After reading this user manual, keep it properly for future reference.
- Improper use of this product may cause serious injury to yourself or others, or cause product damage and property loss. Once you use this product, it is deemed that you understand, approve and accept all the terms and content in this document.
- In compliance with laws and regulations, the Company reserves the right to final interpretation of this document and all documents related to this product. This document is subject to changes updates, revisions, or termination) without prior notice. Please visit the official website to obtain the latest product information.
- No compensation for losses caused by the use of non-standard connectors.
Before First Use
Prior to using your product, please read all the safety and operating instructions thoroughly. Please ensure you follow the steps below before using the product.
We recommend you keep the original packaging for storing the product when not in use.
Please pay close attention to the section entitled Warnings & Safety Information.
Find a safe and convenient place to keep this instruction manual for future reference.
Unpack the product but keep all packaging materials until you have made sure your new product is undamaged and in good working order. Ensure you have all accessories listed in this manual.
Box Contents
- Power Station: Image of the Powertech 1024Wh Power Station.
- Mains Charging Cable: Image of a mains charging cable with a standard plug.
- 12V Charging Cable: Image of a 12V car charger cable.
- Solar Charging Cable: Image of a solar charging cable with MC4 connectors.
- User Manual: Image of the user manual booklet.
Product Diagram
Diagram showing the front, top, and rear views of the Powertech 1024Wh Power Station with numbered ports and features.
- AC Outputs
- LCD Display
- 100W PD USB-C Outputs
- QC 3.0 USB-A Outputs
- AC Output Switch
- Main Power Switch
- 12V Cigarette Socket Output
- DC5521 Outputs
- DC Output Switch
- Extended Battery Socket
- High Current DC Input
- AC Charging Input
- Circuit Protection
LCD Screen Description
Diagram illustrating the Powertech 1024Wh Power Station's LCD screen, showing battery capacity percentage, battery capacity circle, fault/warning indicators, remaining discharge time, output power display, input power display, WiFi/Bluetooth connection status, and various protection indicators (low temperature, high temperature, cooling fan, car charge port, DC5521 port).
Usage Instructions
LCD battery capacity circle indicates battery level. The capacity circle is divided into six sections, accounting for approximately 17%~35%~51%~68%~85%~100% of the capacity. When in use, the LCD display automatically wakes up. When discharging, the blue capacity segment disappears from the display, indicating remaining capacity. When charging, the blue battery capacity circle flashes clockwise along the trajectory, which indicates that the device is currently charging. The number on the right side of the energy circle now displays the real-time input power. After full charging, all blue capacity segments will be illuminated and keep in stable. After charging is completed, please unplug the charger.
Press and hold the power button, the product will turn on, the LCD screen will light up, and the power button indicator light will turn to a steady state; press and hold the power button for about 3 seconds or more, the LCD screen will display the word "off" and then release it, the product will shut down, and the LCD display will turn off. When the main power button is turned on, lightly press the switch button of each functional area, and the corresponding function icons on the LCD screen will light up at the same time. At this time, the functions in this area can be used normally; tap the corresponding functional area button again, and the corresponding LCD screen icons will turn off. This area function stops working.
[NOTE]: After the product is turned on, short press the main power button. The LCD screen will turn off but the product will not shut down. If the product is not operated within 5 minutes, the product will automatically shut down.
[NOTE]: The default standby time of this product is 6 hours. If other output power keys are not turned on and no load is connected to the product, the product will automatically shut down after 6 hours. If the product is not operated within 5 minutes, the product will enter sleep state and the LCD screen will automatically turn off. When the product has load changes or operations, the LCD screen automatically lights up. The standby time can be set on the APP.
[NOTE]: In high-temperature environments, it is recommended to use loads below 1600W when the capacity is discharged from 100% to 30%. Otherwise, it may trigger the high-temperature protection of the battery cells.
Charging Instructions
AC Charging
Diagram showing the AC charging cable connected to a wall outlet and the power station's AC charging input port.
When the AC output of the product is turned off, the switch is in the 'SLOW' position for slow charging with an input power of 700W, and the switch is in the 'Fast' position for fast charging with an input power of 1400W;
[NOTE]: The product's fast and slow charging function must be turned off when switching.
Solar Charging
Diagram illustrating the connection of multiple 12V solar panels via a solar charging cable to the power station's solar input port.
Use the included solar cable to connect 12V solar panels to the device. Up to 3 standard solar panels can be connected.
[NOTE]: When using a suitable solar panel to charge this product, please make the connection according to the user manual specifications.
[WARNING]: Before connecting the solar panel, please confirm that the output open circuit voltage specification of the solar panel is within 80V to avoid damage to the product.
Car Charging
Diagram showing the power station being charged via a car charger cable connected to a vehicle's cigarette lighter socket.
Use the car charger port of your vehicle to charge this. At the same time, ensure that the car charger port and the cigarette lighter of the car charger input cable are in good connection.
[NOTE]: For protecting the car battery from losing power and unable to start, it is necessary to use the car charger to charge after the car is started.
Extended Battery Charging
Diagram showing the power station connected to an extended battery pack using a supplied cable.
Up to one extended battery can be connected to this product. Only use the supplied cable to connect the power station and the extended battery; the device will start to charge when a reading appears on the input power on the screen.
[NOTE]: Please make sure that both the product and the power pack are turned off Before connecting the extended battery to this product.
[NOTE]: After this product is connected to the extended battery, make sure that the LCD display of this product shows the input power, before turning on.
[WARNING]: Do not directly connect or remove the power pack during the charging and discharging process. If you need to connect or remove the power pack when using, please turn off the power before operating.
[WARNING]: Do not use your hands or other objects to touch the metal terminals at the connection port of the power pack. If there are foreign objects attached to the metal terminals, please lightly wipe with a dry cloth.
[WARNING]: The device only allows to plug in and unplug the battery pack in the shutdown status: with the device on, to plug or unplug battery packs will trigger the overcurrent protection. If damage under this situation, no warranty allowed.
Other Functions
Circuit Break Protection Function
Diagram showing the AC input port and the pop-up AC input overload protector button.
When the AC input current is continuously more than 10A, the device charge input port will protect itself. The AC input overload protector button will pop up automatically. After confirming that the product is not faulty, press the AC input overload protector to reset the circuit breaker.
FAQ
- What type of battery does the product use?
This product uses high-quality lithium iron phosphate batteries.
- What equipment can be connected to the AC output port of the product?
The AC output port of this product has a rated power of 2000W and a peak power of 4500W. It can power most household appliances. However, it is recommended that you confirm the power of the appliance before use and ensure that the sum of the power of all load devices is less than the rated power.
- How to know how long the product can provide power?
The LCD screen of this product will display the battery life, and devices with stable power consumption can be estimated based on this time.
- How to tell if the product is charging?
When charging, the LCD screen will display the remaining charging time, and the power indicator circle outside the battery power percentage will begin to rotate in a circular motion, and the input power will be displayed.
- How to clean this product?
Please use a dry, soft, clean cloth or paper towel to wipe this product.
- How to store the product?
When storing, please turn off this product first and then store it in a dry, ventilated place at room temperature. Do not place this product near water and fire sources. During long-term storage, it is recommended to charge and discharge the battery every three months to extend the service life of this product.
- Can this product be brought on board a plane?
No.
- Is the actual output capacity of the product consistent with the capacity specified in the user manual?
The capacity indicated in the user manual is the rated capacity of the battery pack of this product. Since this product has a certain efficiency loss during the charging and discharging process, the actual output capacity of the product is lower than the capacity specified in the user manual.
Error Codes
| FAULT CODE | FAULT INFORMATION | STATUS | REMARKS |
|---|---|---|---|
| E000 | AC output short circuit protection | Flashing, no output | Press the AC output power on/off button for recovery |
| E001 | Output overload protection | Flashing, no output | Flashing icons indicates which circuit overload. Overload protection needs to be restored manually, UPS function overload 2000W 1 sec. |
| E002 | AC Battery low voltage protection | The corresponding function icon flashes and the corresponding port has no output. | After protection, restart corresponding function keys to restore functions, and recharge it timely |
| E003 | AC output over-voltage and low voltage protection | Flashing, no AC output | You need to manually press the AC power button to recover |
| E004 | Abnormal AC input frequency | Flashing, no output | Automatically recover when frequency is normal |
| E005 | High and low bus voltage, over-current | Flashing, no output at all ports | You need to manually press the AC power button to recover |
| E006 | Inverter over-temperature charging over-temperature protection | Flashing,no output | Temperature lower down to normal level, it will recover automatically |
| E010 | Overload and short circuit of the cigarette lighter socket | Flashing,no output | You need to manually press the DC power button to recover |
| E011 | Overload and short circuit of the USB-A port | Flashing, no output at all ports | You need to manually press the DC power button to recover |
| E012 | Overload and short circuit of the USB-C port | Flashing, no output at all ports | You need to manually press the DC power button to recover |
| E016 | Overvoltage of the inverter input battery | E016 code + Flashing | You need to manually press the DC power button to recover |
| E020 | BMS communication failure | Flashing, no output at all ports | Check BMS communication cable |
| E021 | Battery cell high voltage alarm | E021 code flashing | Set the device aside and wait for the battery voltage to recover automatically |
| E022 | Battery cell low voltage alarm | Battery capacity percentage flashing | Connect the AC charging cable and keep charging until the voltage is normal |
| E023 | Total battery voltage is too high | E23 code flashing but output is normal | Set the device aside and wait for the battery voltage to recover automatically |
| E024 | Total battery voltage is too low | Flashing, no output at all ports | Connect the AC charging cable and keep charging until the voltage is normal |
| E025 | Battery high temperature | Flashing, no output at all ports | Automatically resumes after temperature recovery |
| E026 | Battery low temperature | Flashing, no output at all ports | Automatically resumes after temperature recovery |
| E027 | System overload | Flashing, AC output close, DC output is normal, the AC load is higher than 2100W or AC+DC load is higher than 2100W | You need to manually press the AC power ON/OFF button to recover |
| E028 | Charging over-temperature | Flashing, charging stop | Automatically resumes after temperature recovery |
| E029 | MOSFET over-temperature | Flashing, no output at all ports | Automatically resumes after temperature recovery |
| E030 | Abnormal battery pack connection | Battery pack connection error | Please replace with the standard battery pack |
Maintenance
- Please store the product away from water sources, heat sources, and metal objects.
- In order to extend the service life of the battery, it is recommended to use or store this product in an environment of 20°C to 30°C.
- If long-term storage is required, please charge and discharge this product once every 3 months (first discharge to 0%, then fully charge, then discharge to 60% for long-term storage); products that have not been charged or discharged for more than 6 months warranty will not be provided.
- For safety reasons, do not store this product in an environment above 45°C or below -10°C for a long time.
- If the product is seriously low on power and idle for too long, the product will enter deep sleep mode, and the product must be charged before use again.
Specifications
| Model | S01 |
| AC Output Rated Voltage | 230VAC |
| AC Output Rated Power | 2000W |
| AC Output Peak Power | 4500W |
| AC Output Frequency | 50Hz |
| DC 12V & Car Lighter Output Rated Voltage | 12V |
| DC 12V & Car Lighter Output Rated Current | 10A |
| USB-A Output | 5V/3A; 9V/2A; 12V/1.5A [18W Max] |
| USB-C Output | 5V/3A; 9V/3A; 12V/3A; 15V/3A; 20V/5A [100W Max] |
| AC Charge Input | 190~250Va.c 6.5A 1400W |
| Solar Input | 12~80Vd.c MPPT:18-75V/14A 800W Max |
| Car Lighter Input | 12~15Vd.c 8A |
| Rated Capacity | 1024Wh |
| Rated Voltage | 51.2 Vdc |
| Battery Type | LiFePO4 |
| IP Grade | IP21 |
| Working Temperature | 0°C~40°C |
| Dimension | 384 x 232 x 295mm |
| Net Weight | 12.6kg |
Warranty Information
Our product is guaranteed to be free from manufacturing defects for a period of 12 Months. If your product becomes defective during this period, Electus Distribution will repair, replace, or refund where a product is faulty; or not fit for intended purpose. This warranty will not cover modified product; misuse or abuse of the product contrary to user instructions or packaging label; change of mind and normal wear and tear. Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and failure does not amount to a major failure. To claim warranty, please contact the place of purchase. You will need to show receipt or other proof of purchase. Additional information may be required to process your claim. Any expenses relating to the return of your product to the store will normally have to be paid by you. The benefits to the customer given by this warranty are in addition to other rights and remedies of the Australian Consumer Law in relation to the goods or services to which this warranty relates.
This warranty is provided by: Electus Distribution Address 46 Eastern Creek Drive, Eastern Creek NSW 2766 Ph. 1300 738 555
