Sylvania SP328-TURQUOISE Bluetooth Speaker
Instruction Manual
Model: SP328-TURQUOISE
Key Features & Controls
This portable Bluetooth speaker offers wireless audio streaming and hands-free calling.
- Bluetooth Connectivity: 蓝牙 (Connect via Bluetooth)
- Volume Up / Next Track: ? (Press to increase volume, press and hold for next track)
- Play/Pause / Pairing: ▶️/⏸️ (Press to play/pause music, press and hold for pairing mode)
- Volume Down / Previous Track: ? (Press to decrease volume, press and hold for previous track)
- Microphone: ? (For hands-free calls)
- DC IN Jack: [DC IN Jack] (For charging)
- AUX IN Jack: [AUX IN Jack] (For wired audio connection)
Important Safeguards
Please read and follow these safety instructions carefully:
- Read all instructions before using the product.
- Do not expose the speaker to rain or moisture.
- Keep the speaker away from heat sources such as radiators, stoves, or other appliances that produce heat.
- Do not attempt to disassemble or repair the speaker yourself.
- Handle the speaker with care to avoid damage.
- Ensure adequate ventilation around the speaker.
- Avoid dropping the speaker.
- Clean the speaker only with a soft, dry cloth.
- Do not use the speaker near flammable liquids or gases.
- Avoid prolonged exposure to direct sunlight.
Product Diagram and Components
The Sylvania SP328-TURQUOISE Bluetooth Speaker features the following components:
Front View:
- 1. Power Button: Used to turn the speaker on and off.
- 2. Volume Down / Previous Track Button: Press to decrease the volume. Press and hold to skip to the previous track.
- 3. Play/Pause / Pairing Button: Press to play or pause music playback. Press and hold to activate Bluetooth pairing mode.
- 4. Volume Up / Next Track Button: Press to increase the volume. Press and hold to skip to the next track.
- 5. Microphone: Integrated microphone for hands-free phone calls.
Rear View:
- 6. DC IN Jack: Connect the included charging cable here to charge the speaker's internal battery.
- 7. AUX IN Jack: Connect an external audio device using a 3.5mm audio cable for wired playback.
Troubleshooting
If you encounter issues with your speaker, try the following solutions:
No Sound
- Ensure the speaker is powered on and the volume is turned up on both the speaker and the connected device.
- Verify that the speaker is successfully connected to your Bluetooth device.
- Check the battery level; charge the speaker if necessary.
Low Volume
- Increase the volume level on both the Sylvania speaker and the connected audio source (e.g., smartphone, tablet).
Distorted Sound
- Lower the volume on the speaker and the connected device.
- Ensure the audio source is of good quality.
- Make sure the connected device is within the optimal Bluetooth range (typically up to 33 feet or 10 meters).
Cannot Connect to Bluetooth Device
- Ensure the speaker is in pairing mode (usually indicated by a flashing light or sound).
- Turn the Bluetooth function off and then on again on your connected device.
- Restart both the speaker and your Bluetooth device.
- Clear the Bluetooth pairing list on your device and try pairing again.
- Check for potential interference from other wireless devices.
Limited Product Warranty
Sylvania warrants this product against defects in materials and workmanship under normal use for a period of one (1) year from the date of original purchase.
This warranty does not cover:
- Damage resulting from accident, misuse, abuse, or neglect.
- Damage caused by operating the product outside the specified operating conditions.
- Damage resulting from unauthorized modification or repair.
- Cosmetic damage, including scratches or dents.
To obtain warranty service, please contact Sylvania customer support.