Sylvania KTS-1091 Bluetooth Speaker

Description of the Sylvania KTS-1091 Bluetooth Speaker: A tall, cylindrical speaker with a textured black finish. It features two prominent speaker grilles on the front, separated by a central section that appears to house controls or indicators. The Sylvania logo is visible at the top.

Instructions for Use

Getting Started

• Remove the unit from the box.
• Remove any packaging from the product.
• Place the original packaging inside the box and store it for safekeeping.

In the Box

• Bluetooth Speaker
• USB charging cable
• 3.5mm audio cable
• Instruction Manual

Features

• Bluetooth wireless connection functionality
• Built-in rechargeable battery
• Volume adjustment
• Support for USB/TF card playback
• Karaoke Function
• FM radio with search and record capabilities
• Aux-in jack

Safety Instructions

• Keep the unit away from heat sources, direct sunlight, humidity, water, and any other liquids.
• Do not use the unit if it has been dropped or damaged in any way.
• Repairs to electrical equipment should only be performed by a qualified electrician. Improper repairs may place the user at serious risk.
• Do not insert objects into any of the openings. Keep the unit free from dust, lint, etc.
• Do not use this unit for anything other than its intended purpose.
• Keep the unit out of reach of children.
• This product is not a toy.
• Do not use abrasive cleaning solvents to clean the unit.
• To minimize the risk of fire or electrical shock, avoid operating in wet conditions such as rain or humidity.
• Do not operate near water (e.g., in bathrooms, swimming pools, etc.).
• Do not expose to excessive heat such as direct sunshine or fire.
• Never immerse the unit in water or any other liquid for cleaning purposes.

Product Diagram

Diagram Key

• 1. DC 5V: Micro USB charging port. Connect the Micro USB cable here and the other end to a power source (DC 5V).
• 2. Aux: 3.5mm audio input jack. Use for connecting audio sources like PCs, digital media players, mobile phones, and other audio-visual products.
• 3. USB slot: For reading MP3 files in FAT32 format with a maximum size of 32GB.
• 4. TF slot: For reading MP3 files in FAT32 format with a maximum size of 32GB.
• 5. Play/Pause: Short press to play and pause music in USB/TF/Bluetooth modes.
• 6. M: Press to change modes (USB/TF, Bluetooth, FM, Aux-in). Press and hold to switch the light on and off.
• 7. PREV: In USB/TF/Bluetooth/FM mode, short press to move to the previous FM channel or track. Long press to decrease the volume.
• 8. NEXT: In USB/TF/Bluetooth/FM mode, short press to move to the next FM channel or track. Long press to increase the volume.
• 9. MIC-IN: Microphone input port for connecting a microphone.

Instruction for Use

Charging the Speaker

This unit features a built-in rechargeable battery. Before first use, it is recommended to fully charge the battery using the provided USB cable. Connect the USB charging cable to the USB port or a USB wall charger (not included) and the other end to the speaker's USB charging slot. The battery charging LED indicator illuminates while the speaker is charging and turns off when the battery is fully charged.

Pairing Your Device with the Bluetooth Speaker

To pair your Bluetooth device (phone or music device):

• Turn the speaker ON. The Bluetooth mode will activate automatically, and you will hear a tone.
• Place the speaker and your Bluetooth device so they are no further than 20 feet (6 meters) apart.
• Activate the Bluetooth function on your Bluetooth device. Please refer to your device's manufacturer's instructions for enabling Bluetooth.
• Once Bluetooth is activated on your device, select the pairing name "Sylvania SP962" from the list of available Bluetooth devices.
• If required, enter the password "0000" to confirm pairing.
• Upon successful pairing, you will hear a voice indicating pairing successful. You can now start using the speaker.

Once paired, the speaker will remember the device and will automatically pair when the device's Bluetooth is activated and within range. You do not need to re-pair previously connected devices. The speaker will attempt to automatically connect to the last device it was paired with when Bluetooth mode turns on. If you wish to pair it with a new device, turn off the Bluetooth on your last connected device, then use your new device to search and select the pairing name.

Once the speaker is paired with your device, music will transmit directly to the speaker. Please refer to your device's user manual for further information.

Function Summary

Listening to Music

Once paired with your device, you can stream music wirelessly through the portable speaker. Select your desired track, and it will stream to your Bluetooth speaker. You can use your device to control the volume and skip tracks.

USB/TF Card Playback

After turning the speaker on, insert a USB or TF card into the respective slot. Music will start playing automatically, and Bluetooth mode will be disconnected.

Using AUX-in

After turning the speaker on, press the 'M' button to switch to Aux mode. Connect one end of the 3.5mm audio cable to the AUX-in jack and the other end to your MP3 player, smartphone, or iPhone to play music.

FM Radio

Press the 'M' button to change to FM radio status. Press the 'PREV' or 'NEXT' buttons to scan for channels automatically. This operation scans all FM stations and pre-records them to memory. The scan procedure may take several minutes to complete and should not be interrupted. Once complete, short press the 'PREV' or 'NEXT' buttons to switch to the previous or next recorded frequency.

Karaoke Function

Insert a microphone into the speaker's MIC-IN port. Note: This function is not available in FM mode.

Please Note

• Not all mobile phones support all the functions listed above. Please refer to your cell phone's user manual for further information.
• Certain functions and indication tones may vary depending on your mobile phone.

Cleaning & Maintenance

Turn OFF the speaker if it is left unattended and before cleaning. Never immerse the speaker in water. Use a dry cloth for cleaning.

Storage

Turn OFF the power when not in use. Clean and store the unit safely.

Specifications

Warranty Information

90 Day Year Warranty

This product is warranted to be free from defects in material and workmanship for a period of ninety (90) days from the date of original purchase. During this period, your exclusive remedy is repair or replacement of this product or component found to be defective, at our option. However, you are responsible for all costs associated with returning the product to us. If the product or component is no longer available, we will replace it with a similar one of equal or greater value. Prior to a replacement being sent, the product must be rendered inoperable or returned to us.

This warranty does not cover glass, filters, wear from normal use, use not in conformity with the printed directions, or damage to the product resulting from accident, alteration, abuse, or misuse. This warranty extends only to the original consumer purchaser or gift recipient. Keep the original sales receipt as proof of purchase is required to make a warranty claim. This warranty is void if the product is used for other than single-family household use or subjected to any voltage and waveform other than as specified on the rating label (e.g., 120V~60Hz).

To make a warranty claim, do not return this product to the store. Please email support@curtiscs.com or call 1-800-968-9853.

FCC Statement

1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the FCC radio frequency exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.