Nestera Aspen Medium Model FRL01-06 Assembly Instructions
Model: FRL01-06
Brand: Nestera
About the Nestera Aspen Medium Model
This document provides detailed instructions for assembling the Nestera Aspen Medium Model, a durable and eco-friendly nesting box. Constructed from recycled materials, it is designed to withstand UV light, atmospheric pollutants, and extreme weather, offering a longer lifespan than traditional timber. The product is easy to assemble and maintain.
Product Parts
| Part No. | Description | Quantity |
|---|---|---|
| 1 | Roof | 1 |
| 2 | Front Panel | 1 |
| 3 | Back Panel | 1 |
| 4 | NB Wall | 1 |
| 5 | Base | 1 |
| 6 | Back Door | 1 |
| 7 | Upper Back Wall | 1 |
| 8 | Roof Support-Short | 1 |
| 9 | Lower Back Wall | 1 |
| 11 | Ramp | 1 |
| 12 | Ramp Brace -Left | 1 |
| 13 | Ramp Brace -Right | 1 |
| 14 | Top Ladder Step | 1 |
| 15 | Chicken Door | 1 |
| 16 | Door Support | 1 |
| 17 | Rain Guard | 1 |
| 18 | Upper Straight Door Channel Cover | 1 |
| 19 | Upper Door Spacer | 1 |
| 20 | Lower Straight Door Channel Cover | 1 |
| 21 | Vent Cover-Back | 1 |
| 22 | Back Door Handle-Right | 1 |
| 23 | Roof Retainers-Left | 4 |
| 24 | Roof Retainers-Right | 4 |
| 25 | Front Door Handle | 1 |
| 26 | Back Door Handle-Left | 1 |
| 27 | Vent Cover-Front | 1 |
| 28 | NB Roof | 1 |
| 29 | NB Side Wall-Left | 1 |
| 30 | NB Side Wall-Right | 1 |
| 31 | NB Divider | 1 |
| 32 | NB Front Trim | 1 |
| 33 | NB Trim-Sides | 2 |
| 34 | Lower Door Spacer | 1 |
| 35 | NB Front | 1 |
| 36 | NB Floor | 1 |
| 37 | Perches | 2 |
| 38 | Rain Guard Twist Locks | 2 |
| 39 | Access Door Locks | 2 |
| 40 | Perch Holders x2 | 2 |
Fixing Parts
| Part No. | Description | Quantity |
|---|---|---|
| F1 | Lynch Pin | 17 |
| F2 | Pi Clip | 77 |
| F4 | Clevis Pin 25mm | 4 |
| F5 | R Clip (Clevis) | 4 |
| F7 | M6 30mm Screws | 12 |
| F9 | M6 Small Washer | 26 |
| F11 | M6 Nylock Nuts | 20 |
| F14 | M6 16mm Countersunk Screws | 8 |
| F25 | M4 12mm Screw | 2 |
| F27 | Handwheel Lock Bolt | 1 |
Assembly Instructions
-
Step 1: Attaching Front and Rear Panels
Attach the front and rear panels to the base. Ensure the base is fitted with the shiny side up. Secure these panels using four (4) 'Pi Clips' (F2). Note: Only insert four 'Pi Clips' at this stage.
-
Step 2: Attaching Side Panels
Attach the lower and upper right side panels. Secure these panels using thirteen (13) 'Pi Clips' (F2) on both sides.
-
Step 3: Attaching Nest Box Wall
Attach the nest box wall. Secure the nest box panel using seventeen (17) 'Pi Clips' (F2) on both sides.
-
Step 4: Attaching Roof Supports
Attach the roof supports. Ensure the textured side faces towards the nesting area. Secure the roof support using two (2) 'Pi Clips' (F2).
-
Step 5: Attaching Access Door Locks
Insert the access door locks. Rotate all access door locks to a 90-degree position.
-
Step 6: Attaching the Access Door
Attach the access door. Secure the door using two (2) 'Lynch Pins' (F1).
-
Step 7: Securing Access Door Handles
Secure the access door handles using four (4) 'Pi Clips' (F2).
-
Step 8: Assembling the Nest Box
Assemble the nest box. Secure the nest box parts using fourteen (14) 'Pi Clips' (F2). Ensure the base is fitted with the shiny side up.
-
Step 9: Attaching the Nest Box
Attach the nest box. Secure the nest box assembly using five (5) 'Lynch Pins' (F1).
-
Step 10: Attaching Nest Box Roof Braces
Attach the nest box roof braces. Secure these braces using seven (7) 'Pi Clips' (F2).
-
Step 11: Attaching the Rain Guard
Attach the rain guard (17) to the top of the nest box. Ensure the shiny side faces outwards.
-
Step 12: Attaching Nest Box Rain Guard Twist Locks
Attach the nest box rain guard twist locks (38). Insert the end of the twist lock into the nest box wall slot. Rotate all twist locks into a vertical position. Apply slight pressure on the rain guard during insertion to aid installation.
-
Step 13: Attaching the Nest Box Roof
Attach the nest box roof. Secure the nest box roof using two (2) 'Lynch Pins' (F1).
-
Step 14: Attaching Roof Retainers
Attach the roof retainers. Secure the roof retainers using eight (8) 'Pi Clips' (F2).
-
Step 15: Attaching Front Vent Cover
Attach the front vent cover. Use four (4) 'M6 Small Washers' (F9), two (2) 'M6 Nylock Nuts' (F11), and two (2) 'M6 16mm Countersunk Screws' (F14).
-
Step 16: Attaching Rear Vent Cover
Attach the rear vent cover. Use four (4) 'M6 Small Washers' (F9), two (2) 'M6 Nylock Nuts' (F11), and two (2) 'M6 16mm Countersunk Screws' (F14).
-
Step 17: Attaching Front Perch Holders
Attach the front perch holders. Use four (4) 'M6 Small Washers' (F9), four (4) 'M6 Nylock Nuts' (F11), and two (2) 'M6 16mm Countersunk Screws' (F14).
-
Step 18: Attaching Rear Perch Holders
Attach the rear perch holders. Use four (4) 'M6 Small Washers' (F9), four (4) 'M6 Nylock Nuts' (F11), and two (2) 'M6 16mm Countersunk Screws' (F14).
-
Step 19: Attaching Door Handle
Attach the door handle. Use two (2) 'M6 Small Washers' (F9), two (2) 'M6 Nylock Nuts' (F11), and two (2) 'M4 12mm Screws' (F25).
-
Step 20: Attaching the Door
Attach the door. Use four (4) 'M6 16mm Countersunk Screws' (F14), four (4) 'M6 Small Washers' (F9), four (4) 'M6 Nylock Nuts' (F11), two (2) 'M6 30mm Screws' (F7), and two (2) 'R Clips' (F5).
-
Step 21: Attaching Lower Door Retainers
Attach the lower door retainers. Use four (4) 'M6 30mm Screws' (F7) and four (4) 'M6 Small Washers' (F9).
-
Step 22: Attaching Upper Door Retainers and Handwheel Lock Bolt
Attach the upper door retainers and the handwheel lock bolt. Use four (4) 'M6 30mm Screws' (F7), four (4) 'M6 Small Washers' (F9), and one (1) 'Handwheel Lock Bolt' (F27).
-
Step 23: Insert Perches
Insert the perches (37).
-
Step 24: Attaching the Roof
Attach the roof. Secure the roof using eight (8) 'Lynch Pins' (F1).
-
Step 25: Assembling the Ladder
Assemble the ladder. Secure the ramp parts using eight (8) 'Pi Clips' (F2).
-
Step 26: Attaching the Ladder
Attach the ladder. Use two (2) 'Clevis Pins' (F4) and two (2) 'R Clips' (F5).
Recycling and Sustainability
Nestera is committed to sustainability, utilizing recycled materials whenever possible for its products. The plastic used is durable, weather-resistant, and requires no preservative treatment, offering a longer lifespan than timber. Metal components are rust-resistant and recyclable. Packaging and literature are also made from recycled materials, making the products eco-friendly.
