KIVIK Chaise Lounge Assembly Instructions
This document provides detailed step-by-step instructions for assembling the IKEA KIVIK chaise lounge. Please read all instructions carefully before beginning assembly.
Important Information & Warnings
- ? Two people may be required for assembly.
- ⚠️ Ensure all parts are present and undamaged before starting. Compare with the parts list.
- ⚠️ Follow instructions precisely to avoid damage or incorrect assembly.
- ? Unpack all components and dispose of packaging responsibly. Keep small parts away from children.
Parts List
- Bolt (100471): 6 pieces
- Nut (100712): 5 pieces
- Washer (100854): 7 pieces
- Washer (100851): 4 pieces
- Hex Key (100002): 1 piece
- Screw (111374): 4 pieces
- Screw (121365): 4 pieces
- Tool (120202): 1 piece
- Foot (121236): 4 pieces
- Frame Part (121227): 1 piece
- Frame Part (121228): 2 pieces
- Frame Part (121230): 1 piece
- Bracket (121231): 1 piece
Assembly Steps
Step 1: Prepare the Base Frame
Attach the four feet (121236) to the underside of the main frame base. Secure them using the provided screws (121365) and the hex key (100002). Ensure they are firmly attached.
Visual Description: The image shows a person attaching square feet to the corners of a large rectangular frame.
Step 2: Attach Support Brackets
Connect the main support brackets to the frame. Use bolts (100471), washers (100854), and nuts (100712). Tighten using the tool (120202) and hex key (100002).
Visual Description: A person is shown using a T-shaped tool to tighten a bolt and nut assembly, with washers in place, onto the frame.
Step 3: Apply the Main Cover
Carefully unfold the main fabric cover for the chaise frame. Drape it over the frame, aligning it correctly. Secure the cover by tucking it in and zipping it closed where applicable. Ensure a snug fit.
Visual Description: A person is shown unfolding a large fabric cover and pulling it over the chaise frame. A close-up shows a zipper being closed.
Step 4: Secure Internal Structure
Insert the internal spring or slatted support structure into the main frame. Ensure it is correctly oriented and seated.
Visual Description: A person is shown placing a large, flexible, spring-like structure into the main sofa frame.
Step 5: Attach Side Support Mechanism
Attach the side support mechanism (121230) to the main frame. Use bolts (100471), washers (100854), and nuts (100712). Tighten using the tool (120202) and hex key (100002).
Visual Description: A person is shown attaching a metal frame piece to the side of the main unit using bolts, washers, and nuts, tightened with a tool.
Step 6: Connect Armrest/Back Support Mechanism
Attach the armrest or back support connecting bracket (121231) to the frame. Use screws (111374) and the hex key (100002). Ensure it is securely fastened.
Visual Description: A person is shown attaching a metal bracket to the frame using screws, tightened with a hex key.
Step 7: Attach Additional Support
Connect the additional frame part (121227) to the structure. Use screws (121365) and the hex key (100002). Ensure a firm connection.
Visual Description: A person is shown attaching a flat metal bar to the frame using screws and a hex key.
Step 8: Attach Final Frame Components
Attach the remaining frame parts (121228) to the sides of the main unit. Use screws (111374) and the hex key (100002).
Visual Description: A person is shown attaching side panels or support pieces to the main frame using screws.
Step 9: Secure Chaise Section
Align and attach the chaise section to the main sofa frame. This may involve connecting specific brackets or mechanisms. Use the provided hardware and tool (120202) for tightening.
Visual Description: An image shows the chaise section being brought towards the main sofa frame, indicating a connection point. A close-up shows a tool tightening a bolt.
Step 10: Final Tightening
Go back and ensure all bolts and screws are fully tightened. Use the tool (120202) and hex key (100002) as needed.
Visual Description: A close-up view of a hand using a tool to tighten a bolt and nut assembly.
Step 11: Integrate Chaise Cushion
Place the large chaise cushion onto the chaise frame. Ensure it sits correctly and is aligned with the frame.
Visual Description: Two people are shown lifting and positioning the large chaise cushion onto the assembled frame.
Step 12: Apply Seat and Back Cushions
Place the main seat cushions and back cushions onto the sofa and chaise sections. Adjust them for a neat appearance.
Visual Description: A person is shown placing the main seat cushion onto the sofa frame. Another image shows placing the back cushion.
Step 13: Fit Cushion Covers
Carefully fit the fabric covers onto the seat and back cushions. Zip them closed securely. Ensure the zippers are fully closed to prevent the cushions from shifting.
Visual Description: A person is shown pulling a fabric cover over a cushion and then zipping it closed. A close-up shows the zipper mechanism.
Step 14: Final Placement and Adjustment
Position the assembled KIVIK chaise lounge in its desired location. Adjust the backrest and cushions for comfort.
Visual Description: The fully assembled KIVIK chaise lounge is shown. A person is shown adjusting the back cushion.
Care and Maintenance
- ? For fabric care, refer to the care label on the product. The symbol [ironing symbol] indicates ironing is permitted at low temperatures.
- ⚠️ Avoid placing hot items directly on the furniture surface.
Product Details
- Product Name: KIVIK Chaise Lounge
- Brand: IKEA
- Document ID: AA-449713-6
- Copyright: © Inter IKEA Systems B.V. 2009
