Anko Bluetooth Wireless Charging Speaker
User Manual
Includes:
- Bluetooth Wireless Charging Speaker
- USB-A to USB-C Charging Cable
- User Manual
Function Overview
The speaker features a wireless charging pad, control buttons, indicator lights, and a microphone. Key components are:
- 1. Wireless Charging Pad/Phone Holder
- 2. Volume Up/Next Song button
- 3. Power ON/OFF, Play/Pause, Answer/End/Reject Call button
- 4. Volume Down/Previous Song button
- 5. Charging Indicator/Bluetooth Indicator light
- 6. MIC (Microphone)
- 7. Wireless Charging Indicator light
- 8. USB-C Input port
How to Use This Speaker
Function Operation
- Power ON/OFF: Long press button 3 [power-button] for 3 seconds.
- Play/Pause: Short press button 3 [play-pause-button].
- Previous Song: Long press button 4 [previous-song-button] for 3 seconds to skip the track.
- Next Song: Long press button 2 [next-song-button] for 3 seconds to skip the track.
- Volume Down: Short press button 4 [volume-down-button] to decrease the volume.
- Volume Up: Short press button 2 [volume-up-button] to increase the volume.
- Answer/End/Reject Call: Short press button 3 [call-button] when a call comes in or during a call.
Specifications:
| Model no: | EBA1-240026A |
| Version: | Bluetooth V5.3 |
| Working distance: | 10 Meters |
| Output: | RMS 8W (THD≤10%) |
| USB-C input: | 9V-3A |
| Battery capacity: | 3.7V 1500mAh |
| Charge time: | Approx 3 hours |
| Music time: | Approx 4 hours (80% volume) |
| Magnetic mobile phone wireless charging output: | 5W/7.5W(iPhone)/10W(Samsung need with magnetic accessory) |
Note: The wireless charging function can only be used when connected to the power supply.
Detailed Functions
Power ON Button Function
Press and hold button 3 for 3 seconds to turn on the device. The blue indicator light on the left will first stay on constantly, and then start flashing rapidly, indicating Bluetooth pairing mode. If no Bluetooth device is connected within 5 minutes, the device will automatically shut down.
Bluetooth Mode
Once the speaker is powered on, it automatically enters Bluetooth mode (blue indicator light flashes). Search for "anko43559749" in your device's Bluetooth menu and connect. Upon successful pairing, the indicator light will stay solid blue. The speaker will automatically reconnect to the last connected device when powered on again.
Phone Holder
The charging pad doubles as a phone holder, adjustable up to approximately 60 degrees. The phone's display angle can be adjusted after placing a magnetic phone on the pad.
TWS Function
- Connect Pairing: Double-click button 3 on either speaker to initiate TWS pairing. Pairing completes within 15 seconds. The host speaker's left indicator light flashes blue, while the secondary speaker's left indicator light turns off. Once paired, search for "anko43559749" on your Bluetooth-enabled device to connect. All actions (song switching, volume, Play/Pause) on one speaker apply to both.
- Disconnect Pairing: Double-click button 3 on either speaker to disconnect TWS. The host speaker remains connected via Bluetooth, while the secondary speaker disconnects and enters pairing mode.
- Re-connection after disconnection: Double-click button 3 on the disconnected speaker to re-enter TWS pairing; it will automatically reconnect to the other speaker (both must be in Bluetooth mode). Subsequent uses will auto-connect if TWS was previously established.
Magnetic Phone Wireless Charger
1. After connecting the power supply, the left and right indicator lights will be solid red. If Bluetooth is connected, the left indicator will be solid blue and red.
2. Place your wireless charging-enabled device on the charging pad to begin charging.
3. When a mobile phone is placed correctly, the right indicator light will be solid blue.
4. If a metal foreign object is detected on the charging pad, the right indicator light will flash red, and wireless charging will stop. Remove the foreign object.
Charging
This speaker uses a rechargeable Lithium battery. Use the provided USB-C cable for charging. Connect the USB-C end to the device and the USB-A end to a charger with a minimum output of 9V/3A. The left indicator light turns red while charging and turns off when fully charged.
Operating Environment & Storage Environment
- Operating environment: Temperature: -5 °C to 45 °C
- Storage environment: Temperature: -20 °C to 60 °C
12 Month Warranty
Thank you for your purchase. This product is warranted against defects in materials and workmanship for 12 months from the date of purchase, provided it is used according to instructions. This warranty is in addition to your rights under the Australian Consumer Law and New Zealand legislation.
Kmart Australia Ltd. or Target Australia Pty Ltd. will provide a refund, repair, or exchange if the product becomes defective within the warranty period. Reasonable expenses for claiming the warranty will be borne by the business. The warranty is void if defects result from alteration, accident, misuse, abuse, or neglect.
Retain your receipt as proof of purchase. Contact Customer Service for any product difficulties. Warranty claims and return expenses can be addressed to the respective Customer Service Centre.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if they fail to be of acceptable quality and the failure does not amount to a major failure.
Important Statements and Safety Information
- This product shall not be connected to a power supply source exceeding PS1 (5V d.c. 1A).
- The battery cannot be subjected to high or low extreme temperatures, or low air pressure at high altitudes during use, storage, or transportation.
- Do not dispose of the battery in fire or a hot oven, or crush or cut it mechanically, as this can result in an explosion.
- Leaving the battery in extremely high temperatures can result in an explosion or leakage of flammable liquid or gas.
- Extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.
- The apparatus is only suitable for mounting at height < 2m.
- Refer to the marking located on the bottom of the apparatus.
Contact Information
For Kmart purchases:
Kmart Australia Ltd.
C/- Customer Service Centre
690 Springvale Road, Mulgrave Vic 3170
Customer Service: 1800 124 125 (Australia) or 0800 945 995 (New Zealand)
Online: kmart.com.au
For Target purchases:
Target Australia Pty Ltd
C/- Customer Service Centre
2 Kendall Street, Williams Landing, Vic, 3027
Customer Service: 1300 753 567
Online: target.com.au/help/contact-us
