Anko Portable Bluetooth Speaker (Model 21YX48) - Operating Instructions and Warranty

12 Month Warranty

Thank you for your purchase. Your new product is warrantied to be free from defects in materials and workmanship for the period stated, from the date of purchase, provided it is used in accordance with recommendations or instructions. This warranty is in addition to your Australian Consumer Law rights and statutory rights under New Zealand legislation for New Zealand customers.

Anko will provide a refund, repair (where possible), or exchange (availability dependent) for this product if it becomes defective within the warranty period. The business will bear the reasonable expense of claiming the warranty. This warranty will no longer apply where the defect is a result of alteration, accident, misuse, abuse, or neglect.

Please retain your receipt as proof of purchase. For any difficulties with your product, contact the Customer Service Centre listed below for the entity you purchased this product from. Warranty claims and claims for expense incurred in returning this product can be addressed to the respective Customer Service Centre.

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and compensation for any other reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Important Statements:

Do not connect to a power supply exceeding 5V DC, 1A.
Avoid exposing the battery to extreme temperatures, low air pressure at high altitudes during use, storage, or transportation.
Do not dispose of the battery in fire or a hot oven, or crush or cut it, as this can cause an explosion.
Do not leave the battery in extremely high temperatures, which can cause an explosion or leakage of flammable liquid or gas.
Do not expose the battery to extremely low air pressure, which may cause an explosion or leakage of flammable liquid or gas.
The apparatus is suitable for mounting at heights below 2 meters.
Refer to the marking on the bottom of the apparatus.

Product Overview

This document provides operating instructions for the Anko Portable Bluetooth Speaker (Model: 21YX48).

What's Included:

Bluetooth speaker
Charging cable
User manual

Function Overview

The speaker features the following components:

LED indicator ?
Volume Down / Previous Track button (-)
Power / Multifunction Button
Microphone ?
Charge port ?
Volume Up / Next Track button (+)

How to Use This Speaker

Function Operation:

Pause/Play: Click the Power/Multifunction Button.
Next Song: Press and hold the Volume Up (+) button.
Previous Song: Press and hold the Volume Down (-) button.
Volume Up: Click the Volume Up (+) button. You will hear a tone notification when the volume reaches maximum.
Volume Down: Click the Volume Down (-) button.

Power ON/OFF:

Power ON: Press and hold the Power/Multifunction Button for 2 seconds. You will hear a voice indication tone.
Power OFF: Press and hold the Power/Multifunction Button for 2 seconds. You will hear a voice indication tone.

Specifications

Model No:	21YX48
Version:	V5.0
Support profiles:	A2DP, AVRCP, HFP
Working Distance:	10 meters
Music Time:	12 Hours
Talk time:	12 Hours
Standby time:	>100 Hours
Charging voltage:	5V d.c.
Charge time:	3 Hours
Pairing window time:	5 minutes

Pairing the Speaker with Bluetooth Devices

Once powered on, the speaker enters pairing mode (LED flashes) and attempts to connect to the last paired device.
Pair the speaker via your mobile phone's Bluetooth menu. Upon successful pairing, you will hear a tone, and the LED will flash periodically.
Bluetooth Name: 'anko43351329' or 'anko43351312'.

Phone Calls:

To answer or end a call: Click the Power/Multifunction Button.
To reject a call: Press and hold the Power/Multifunction Button for 1 second.

Playing Music:

Once connected via Bluetooth, enjoy music wirelessly through the speaker.

Battery Charging

This speaker is powered by a rechargeable Li-ion battery. Use the included USB cable to recharge the battery.

Insert the USB charging cable into a suitable USB port.
Connect the other end of the cable to the speaker's USB port.
The LED indicator turns RED while charging.
The LED indicator turns off when the battery is fully charged.
A full charge takes approximately 3 hours.

True Wireless Mode (TWS) (Bluetooth Mode Only)

Entering TWS Mode:

With both speakers in Bluetooth mode, press the Power/Multifunction Button on either speaker to establish a true wireless connection. You will hear a pairing tone once connected. Connect to the speaker's Bluetooth name on your mobile device.

If one speaker is already connected to a Bluetooth device, press the Power/Multifunction Button on the second speaker (also in Bluetooth mode) to connect them in TWS mode.

After the initial successful pairing, the two speakers will automatically connect when both are powered on.

Disabling TWS Mode:

Click the Power/Multifunction Button three times on either speaker to disable TWS mode.

Contact Information

Contact for Kmart Purchases:

Kmart Australia Ltd.
C/- Customer Service Centre
690 Springvale Road,
Mulgrave Vic 3170
Customer Service: 1800 124 125 (Australia) or 0800 945 995 (New Zealand)
Website: kmart.com.au

Contact for Target Purchases:

Target Australia Pty Ltd
C/- Customer Service Centre
2 Kendall Street, Williams Landing, Vic, 3027
Customer Service: 1300 753 567
Website: target.com.au/help/contact-us

Legal Notice

The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth® SIG, Inc. Kmart Australia uses these marks under license.

	Anko Portable Bluetooth Speaker 21YX48 - Operating Instructions & Warranty Anko Portable Bluetooth Speaker (Model 21YX48) operating instructions, including setup, usage, battery charging, and TWS mode. Features 12-month warranty information for Australia and New Zealand.
	Anko RGB Tower Speaker 43237838 User Manual, Specifications, and Warranty Comprehensive user manual for the Anko RGB Tower Speaker (Model 43237838) by Kmart. Includes setup instructions, functionality details, Bluetooth pairing, TWS mode, AUX-in, music playback, hands-free calling, technical specifications, and 12-month warranty information.
	Anko PORT BT PARTY SPEAKER 42939740: User Manual & Features Comprehensive guide for the Anko PORT BT PARTY SPEAKER (Model 42939740). Learn about setup, functions, Bluetooth, TWS, microphone use, and warranty.
	Anko Bluetooth Portable Pro Speaker: Operating Instructions & Specifications Comprehensive operating instructions, specifications, and warranty information for the Anko Bluetooth Portable Pro Speaker (Models 42976608, 43567751). Learn how to pair, use features, and care for your device.
	Anko Bluetooth® Light Up Speaker Operating Instructions User manual for the Anko Bluetooth® Light Up Speaker (Model 42963516). Provides detailed operating instructions, function overview, pairing guide, safety precautions, and technical specifications. Includes 12-month Kmart warranty information.
	Anko Bluetooth Speaker: Operating Instructions and Safety Guide Comprehensive operating instructions and safety guide for the Anko Bluetooth Speaker (Model 42-750-444). Learn how to pair, use functions, charge, and maintain your speaker.
	Anko Bluetooth Port Speaker Barrel 42764717 User Manual User manual for the Anko Bluetooth Port Speaker Barrel (Model 42764717), covering safety instructions, charging, pairing, FM mode, music playback, hands-free calling, specifications, and warranty information.
	Anko 43303441 Portable Party Speaker with Lights - Operating Instructions Comprehensive operating instructions for the Anko 43303441 Portable Party Speaker with Lights. Learn how to connect via Bluetooth, use the microphone, playback modes (USB, TF, AUX), and special features like M.PRI and TWS pairing. Model KM43303441.

Anko Portable Bluetooth Speaker