SONOFF TH Origin / Elite

Product Introduction

The SONOFF TH Origin/Elite is a smart switch with temperature and humidity monitoring capabilities, designed to work with compatible temperature and humidity sensors. It allows for automatic control of connected devices based on preset environmental thresholds.

Diagrams show the front view of the TH Origin and TH Elite devices. The TH Origin diagram labels the sensor interface, buttons, protective cover, and mounting base. The TH Elite diagram includes these components plus a screen display and a dry contact interface.

Buttons Instructions

LED Indicator Status Instruction

Features

• ?️ Temperature and humidity monitoring
• ? Temperature and humidity history data
• ⚙️ Automatic Mode
• ? Share Control
• ⚡ Inching Mode
• ? Voice Control
• ⏰ Smart Timer/Delay
• ? LAN Control
• ? Dry contact (TH Elite)
• ?️ Screen Display (TH Elite)

Device Installation

Safety Warning: ⚠️ Please install and maintain the device by a professional electrician. To avoid electric shock hazard, do not operate any connection or contact the terminal connector while the device is powered on!

• 1. Power off: Ensure the device is powered off before installation.
• 2. Wiring Instruction: A diagram illustrates the wiring for a light bulb connection. It shows AC power input (100-240V) with Live (L) and Neutral (N) lines connected to the device, and an output for the load.
• Dry contact wiring method: Press the white button on the top of the wire connecting hole to insert the wire, then release. Wire conductor size: 0.13-0.5mm², wire stripping length: 9-10mm. Ensure all wires are connected correctly.
• 35mm Rail Installation: A diagram shows the device being mounted onto a 35mm DIN rail. First, fix the guide rail, then slide the device base buckle against the side of the guide rail.
• Insert the Sensor: A diagram shows a sensor being plugged into the sensor interface port on the device.
• Compatible SONOFF sensors: DS18B20, MS01, THS01, AM2301, Si7021.
• Compatible sensor extension cables: RL560.
• Note: Some old version sensors need to be used with the accompanying adapter.

Device Pairing

• 1. Download the eWeLink App: Download the eWeLink App from your app store. A QR code is provided for easy access to Android™ & iOS versions.
• 2. Power On: After powering on, the device will enter Bluetooth Pairing Mode. The Wi-Fi LED indicator will flash in a cycle of two short and one long flash. The device exits pairing mode after 3 minutes if no pairing is done. To re-enter pairing mode, long press the device button for 5 seconds until the Wi-Fi LED indicator shows the pairing pattern.
• 3. Add Device:
  • Method 1: Bluetooth Pairing. Tap '+' in the app, select 'Bluetooth Pairing', and follow the on-screen prompts.
  • Method 2: Scan QR code. In pairing mode, tap 'Scan QR code' in the app and scan the QR code on the back of the device.

Voice Control Instructions

• Alexa:
  • 1. Download the Amazon Alexa App and sign up.
  • 2. Add Amazon Echo Speaker on the Alexa App.
  • 3. Account Linking: Link your Alexa account with your eWeLink account. Follow the prompts in both apps to complete the linking process.
  • 4. After linking, discover devices in the Alexa App.
• Account linking for Google Assistant, Xiaodu, Tmall Genie, Mate Xiaoai, and others is similar. Refer to the respective app guides.

Specifications

LAN Control

A communication method to control devices directly via Wi-Fi without using the cloud. Requires smartphone and device on the same Wi-Fi network.

Note: Operation notifications, operation records, firmware upgrades, smart scenes, device sharing, and deletion are not supported when there is no external network connection.

Control Modes

• Manual mode: Turn the device on/off via the App or the device button.
• Auto mode: Automatically turn the device on/off by setting temperature and humidity thresholds. You can set up to 8 automatic control programs with specific time periods.
• Manual control and Auto mode can operate simultaneously. In Auto mode, manual overrides are possible, and Auto mode will resume based on sensor readings after a period.

Factory Reset

Deleting the device from the eWeLink app restores it to factory settings.

Common Problems

• Fail to pair Wi-Fi devices to eWeLink APP:
  • 1. Ensure the device is in pairing mode. It exits automatically after 3 minutes of inactivity.
  • 2. Enable location services and grant location permission. This is needed to scan for Wi-Fi networks.
  • 3. Use a 2.4GHz Wi-Fi network.
  • 4. Verify the Wi-Fi SSID and password are correct and do not contain special characters.
  • 5. Keep the device close to the router during pairing for a strong signal.
• Wi-Fi devices "Offline" issue: Check the Wi-Fi LED indicator status:
  • LED blinks once every 2s (Fail to connect to router): Check Wi-Fi SSID/password (no special characters), router capacity, or Wi-Fi signal strength.
  • LED flashes twice (Fail to connect to server): Check internet connection or router capacity (number of connected devices).
• If problems persist, submit a request via help&feedback in the eWeLink App.

FCC Warning

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Declaration of Conformity

Shenzhen Sonoff Technologies Co., Ltd. declares that the radio equipment type THR316, THR320, THR316D, THR320D are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following internet address: https://sonoff.tech/usermanuals

Operation frequency Range: 2402-2480MHz(BLE), 2412-2472MHz(Wi-Fi)

RF Output Power: 8.36dBm(BLE), 18.56dBm(802.11b), 17.93dBm(802.11g), 19.23dBm(802.11n20), 19.44dBm(802.11n 40)(Wi-Fi)