Transcend DrivePro Body 30 User Manual

1. Introduction

The DrivePro Body 30 is a high-performance body camera designed for professional use. It features Full HD 1080P recording, a 130° wide-angle lens with an F2.0 aperture, built-in Wi-Fi, and GPS capabilities. It is ruggedized with an IP67 rating for dust and water resistance and meets MIL-STD-810G standards for shock resistance. The device supports up to 64GB of storage and offers long battery life.

Key Features:

• Full HD 1080P recording at 30fps
• 130° wide-angle lens, F2.0 aperture
• Built-in Wi-Fi for app connectivity
• GPS for location tracking
• IP67 dust and water resistance
• MIL-STD-810G compliant for shock resistance
• Long-lasting battery (up to 12 hours recording)
• Supports up to 64GB storage
• Includes DrivePro™ Body App and DrivePro™ Body Toolbox software

2. System Requirements

The DrivePro™ Body Toolbox software is compatible with the following operating systems:

• Windows 7, Windows 8, Windows 8.1, Windows 10
• macOS 10.14 or later

The DrivePro™ Body App is available for Apple iOS and Android devices.

3. Device Overview

3-1 Device Layout

The DrivePro Body 30 features several key components:

• Lens: Captures video and photos.
• Power Button: Turns the device on/off.
• Record Button: Starts and stops video recording.
• LED Indicator: Displays device status (e.g., power, recording, Wi-Fi).
• Status LED: Provides additional status information.
• 3.5mm Connector: For connecting accessories like microphones or docking stations.
• USB Port: For charging and data transfer.

3-2 LED Indicators

The device uses LED indicators to show its status:

• LED (Power/Status):
  • Solid Blue: Device is on and functioning normally.
  • Flashing Blue: Device is booting up or shutting down.
  • Solid Red: Device is recording video.
  • Flashing Red: Recording error or low battery.
  • Solid Yellow: Device is in standby mode or charging.
  • Flashing Yellow: Wi-Fi is active or connecting.
  • Off: Device is off or in deep sleep.
• LED (Battery Level):
  • Green: Battery level > 67%
  • Yellow: Battery level 31%-67%
  • Red: Battery level < 31%

3-3 Charging

To charge the DrivePro Body 30:

1. Connect the 3.5mm to USB cable to the device's 3.5mm port.
2. Connect the other end of the USB cable to a power source (e.g., USB adapter, computer).
3. The LED indicator will turn solid yellow while charging and turn off or blue when fully charged.

4. Basic Operation

4-1 Powering On/Off

To Power On: Press and hold the Power Button for a few seconds until the LED indicator turns blue.

To Power Off: Press and hold the Power Button until the LED indicator flashes blue and then turns off.

4-2 Recording Video

To Start Recording: Press the Record Button. The LED indicator will turn solid red.

To Stop Recording: Press the Record Button again. The LED indicator will return to its previous state (e.g., solid blue).

4-3 Taking Photos

While the device is on, press and hold the Record Button for approximately 5 seconds to take a photo. The LED indicator may flash briefly.

5. LED Indicators

Refer to Section 3-2 for a detailed explanation of the LED indicator statuses.

6. DrivePro™ Body App

The DrivePro™ Body App allows you to manage your DrivePro Body 30 from your smartphone or tablet.

6-1 Downloading and Installing the App

1. Search for "DrivePro Body" on the Apple App Store or Google Play Store.
2. Download and install the app on your compatible iOS or Android device.

6-2 Connecting to the Device

1. Ensure Wi-Fi is enabled on your DrivePro Body 30.
2. Open the DrivePro Body App.
3. Tap "Connect to Device" or a similar option.
4. On your mobile device, connect to the DrivePro Body 30's Wi-Fi network (SSID format: DPB30_XXXXXX, Password: 12345678).
5. The app will then connect to the camera.

6-3 Live View and Settings

The app provides a live view from the camera. You can adjust various settings, including:

• Video Resolution: Options like 1080p/30fps, 720p/30fps.
• Frame Rate: e.g., 30fps, 60fps.
• Field of View: Adjusting the wide-angle view.
• Loop Recording: Set recording duration (e.g., 3, 5, 10 minutes).
• Audio Recording: Enable/disable audio.
• Date and Time Stamp: Overlay date and time on recordings.
• LED Indicators: Control LED behavior.
• GPS Logging: Enable/disable GPS data recording.

6-4 File Management

View, download, and delete recorded videos and photos directly from the app.

6-5 Additional App Settings

The app also allows for device formatting, firmware updates, and setting preferences like date/time format (YY/MM/DD, MM/DD/YY, DD/MM/YY) and time format (24-hour, 12-hour).

7. DrivePro™ Body Toolbox

The DrivePro™ Body Toolbox is a Windows-based software application for managing your DrivePro Body 30 recordings and settings.

7-1 Installation

Download the latest version of the DrivePro™ Body Toolbox from the Transcend website: www.transcend-info.com/downloads. Run the installer and follow the on-screen instructions.

7-2 Features

The Toolbox allows you to:

• View and manage recorded video files (MOV/MP4 format).
• Adjust video settings (resolution, frame rate, loop recording duration).
• Configure device settings (LED indicators, date/time format, Wi-Fi settings).
• Format the internal storage.
• Update the device firmware.
• View GPS data and playback routes on a map.

7-3 File Management

Organize, play back, and export video files. You can filter files by date and time.

7-4 Settings

Configure various device parameters, including date/time formats, Wi-Fi settings, and LED behavior.

7-5 Firmware Update

Connect the DrivePro Body 30 to your computer via USB and use the Toolbox to check for and install firmware updates.

8. Docking Station

The optional docking station simplifies charging and data transfer.

Setup:

1. Connect the docking station to a power source using the provided adapter.
2. Connect the docking station to your computer via USB 3.0.
3. Place the DrivePro Body 30 into the docking station.
4. The device will automatically start charging and can be accessed via USB 3.0 or through the DrivePro™ Body Toolbox.

Accessing the Device via Docking Station:

1. Connect the docking station to your computer.
2. The DrivePro Body 30 will appear as a removable drive.
3. Alternatively, access the device's IP address (default: 10.10.0.100) via a web browser to manage settings. The default login is admin/12345678.

9. Specifications

DrivePro Body 30:

• Model: DPB30
• Lens: Wide-angle 130°, F2.0 aperture
• Video Resolution: Full HD (1920 x 1080) @ 30fps
• Video Format: MOV (H.264)
• Storage: Built-in 64GB eMMC
• Battery: 3120mAh rechargeable Li-ion battery
• Battery Life: Up to 12 hours recording (may vary based on settings and usage)
• Connectivity: Wi-Fi, USB 2.0
• Durability: IP67 rated, MIL-STD-810G compliant
• Operating Temperature: -20°C to 65°C (-4°F to 149°F)
• Storage Temperature: 5°C to 35°C (41°F to 95°F)
• Dimensions: 95.9mm x 52.2mm x 27.6mm
• Weight: 130g
• Power Input: DC 5V 2A
• Certifications: CE, FCC, BSMI, MIC, EAC

10. IP67 Rating

The DrivePro Body 30 is rated IP67, meaning it is protected against dust ingress and can withstand immersion in water up to 1 meter for 30 minutes. This ensures reliable operation in various environmental conditions.

11. Connecting to a Computer

Connect the DrivePro Body 30 to a computer using the provided 3.5mm to USB cable or the docking station. The device will appear as a removable drive, allowing you to transfer recorded files.

12. Specifications Summary

13. FAQ

• Q: Can I connect the DrivePro Body 30 to a computer via USB?
  A: Yes, you can connect it using the provided 3.5mm to USB cable or the docking station.
• Q: Does the DrivePro Body 30 work with Mac computers?
  A: Yes, the device can be connected to Mac computers via USB for file transfer. The DrivePro™ Body Toolbox software is Windows-based, but files can be managed manually on macOS.
• Q: What is the USB standard used?
  A: The device uses USB 2.0 for connectivity.
• Q: Is the DrivePro Body 30 waterproof?
  A: The device has an IP67 rating, meaning it is dustproof and can withstand immersion in water up to 1 meter for 30 minutes. It also meets MIL-STD-810G standards for drop resistance.

14. Recycling and Battery Disposal

Product Recycling (WEEE): This product is covered by European Directive 2002/96/EC. It is designed with recyclable components. Please dispose of it separately from household waste according to local regulations for electrical and electronic products to prevent negative environmental and health impacts.

Battery Disposal: The product contains a built-in rechargeable battery covered by European Directive 2006/66/EC. Do not dispose of batteries with normal household waste. Follow local regulations for separate battery collection. Incorrect battery replacement carries a risk of explosion; dispose of used batteries according to instructions. Attempting to remove non-exchangeable batteries will void the warranty.

15. Warranty Information

Transcend offers a Two-year Limited Warranty for this product. The warranty covers failures under normal use within two years from the original purchase date. Transcend will repair or replace the product at its discretion. Software, digital content, LCD panels, rechargeable batteries, and accessories are not covered. The warranty is voided by accidents, abuse, misuse, alteration, unauthorized repair, or physical damage. Proof of purchase is required for warranty service. For full details, visit www.transcend-info.com/warranty.

16. GNU General Public License (GPL)

Firmware and software incorporated into this product may be licensed under the GPL. Source code for GPL Software may be downloaded or obtained from Customer Support within three years of purchase. Users may copy, redistribute, and modify the GPL Software under the terms of the GNU General Public License. GPL Software is provided "AS IS" without warranty. Transcend does not provide support for GPL software.

17. End-User License Agreement (EULA)

By using the software and/or firmware ("Licensed Software") with the Transcend product, you agree to the terms of this End-User License Agreement. Transcend grants a personal, non-exclusive license to use the Licensed Software. Intellectual property rights belong to Transcend or its suppliers. Users may not reverse engineer, decompile, or modify the software, nor distribute or transfer it. Transcend disclaims all warranties and limits liability for the Licensed Software.

18. FCC Compliance

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it may not cause harmful interference, and (2) it must accept any interference received. This equipment has been tested and found to comply with Class B digital device limits. For RF Exposure Information (SAR), the device meets government requirements and its SAR information is available on the FCC website (FCC ID: A4Z-B001E).

19. NCC Compliance

This section details compliance with Taiwan's National Communications Commission (NCC) regulations, including specific statements and requirements for radio frequency devices.