Anker Zolo Charger (140W, 4-Port, PD 3.1)

Using Your Product

Live Charged.

This guide provides instructions for using your Anker Zolo Charger.

The charger features four ports:

• USB-C1
• USB-C2
• USB-C3
• USB-A

Product Functions

Single Press: Toggle screen display.

Long Press: Rotate screen display 180°.

Attention & Safety Information

Important Notes:

• This product is designed for use with IT equipment only.
• The product is intended to be operated up to 2000 meters above sea level.
• Disconnection from line voltage is made by the AC plug.

Warnings:

• To prevent fire, explosion, or injury, immediately stop using the product if you observe any of the following: damage, water exposure, foreign objects in ports, swelling, smoke, strange smells or noises, abnormal heating, liquid leakage, or charging abnormalities.
• Do not use or store the product in environments that may lead to fire, explosion, or injury, such as: under direct sunlight, inside a hot car, near open flames, in humid or wet locations.
• Do not subject the product to excessive impact, disassemble, modify, or attempt to repair it, as this may lead to fire, explosion, or injury.
• Ensure the power plug is fully and securely inserted into the outlet.
• Remove any dust or foreign objects from the power plug and product output ports before use.
• Do not insert metal objects (e.g., pins) into the input/output ports to prevent short circuits. Avoid carrying or storing the product with metal items like necklaces or hairpins.

Further Information

Scan the QR code provided in the original document for power distribution details and screen display guide.

For tutorial videos, FAQs, manuals, and more information, please visit:

https://support.anker.com

Declaration of Conformity

Anker Innovations Limited declares that this product is in compliance with relevant EU directives (2014/35/EU, 2014/30/EU, 2011/65/EU, 2009/125/EC, 2019/1782/EU). The full text of the EU declaration of conformity is available at:

https://support.anker.com/s/articleRecommend?otherType=Anker_EN_Extemal_Manual_and_Download&secondType=doc

Anker Innovations Deutschland GmbH: Georg-Muche-Strasse 3, 80807 Munich, Germany

Anker Technology (UK) Limited: GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio / TV technician for help.

Responsible Party (for FCC matters): Fantasia Trading LLC, 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764, Tel: +1 (800) 988 7973

IC Statement

This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

Industrie Canada Declaration: Cet appareil numérique est conforme à la norme NMB-003 du Canada.

Usage Restrictions

Indoor use only.

Environmental Disposal

This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Specifications

Warranty Information

For Australian and New Zealand customers, please visit www.anker.com/au/support/warranty or scan the QR code for warranty information.

Product Compatibility

This product is designed to supply power for audio/video, information, and communication technology equipment from the following brands:

Apple, Samsung, Huawei, Xiaomi, Oppo, Vivo, HP, Lenovo, Dell, HONOR, Redmi, Realme, Oneplus, Meizu, iqoo, NOKIA, duoqin, AGM, KTouch, SONY.

Contact Information

Email: support@anker.com

Phone Support:

• (US/CA): +1 (800) 988 7973
• (UK): +44 (0) 1604 936 200
• (DE): +49 (0) 69 9579 7960
• (UAE): +971 8000 320 817
• (KSA): +966 8008 500 030
• (Kuwait): +965 2206 9086
• (Egypt): +20 8000 000 826
• (TR): +90 (850) 460 1414
• (RU): +8 (800) 511 8623
• (India): 000-8000-504-414
• (China): +86 400 0550 036
• (Japan): +81 34455 7823
• (Korea): +82 02-1661-9246

Anker Innovations Limited: Unit 56, 8th Floor, Tower 2, Admiralty Centre, 18 Harcourt Road, Hong Kong