Anker Prime 100W GaN Wall Charger (3 Ports)
User Manual
Live Charged.
For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com
Follow us:
- @AnkerDeutschland
- @AnkerJapan
- @Anker
- @AnkerOfficial
- @Anker_JP
- @anker_official
- @anker_jp
Product Number: A2343
Attention
- The product is designed for use with IT equipment only.
- Naked flame sources, such as candles, must not be placed on the product.
- The disconnection from line voltage is made by AC plug.
- In case of broken cords or plugs, the product must be disposed of.
- If you want to clean the product, only use a dry cloth or brush.
- The socket-outlet shall be installed near the equipment and shall be easily accessible.
- The power supply is not intended to be repaired by service personnel in case of failure or component defect (the product can be disposed of).
- Fold slowly to avoid finger injury.
Using Your Product
The charger features three ports: USB-C1, USB-C2, and USB-A.
For the fastest and safest charge, use an Anker® cable, your device’s original cable or another certified cable (such as MFi).
Specifications
Input
Voltage/Frequency | 100V-240V~50/60Hz 2.1A |
Output
Port Configuration | Output |
---|---|
Use 1 Port Output | USB-C1/C2: 5V 3A/9V 3A/12V 3A/15V 3A/20V 5A (100W Max) USB-A: 4.5V 5A/5V 4.5A/5V 3A/9V 2A/12V 1.5A/10V 2.25A (22.5W Max) |
Use 2 Ports Output | USB-C1+USB-C2: 100W Max USB-C1+USB-A: 100W Max USB-C2+USB-A: 100W Max |
Use 3 Ports Output | 100W Max |
Total Output | 100W Max |
PPS Support | PPS |
Efficiency
Average active efficiency | 79.20% |
Efficiency at low load (10%) | 59.18% |
No-load power consumption | 0.27W |
Operating Temperature
Temperature | 0℃ -25℃ / 32℉ -77℉ |
Note: To ensure electrical safety and product performance, the output power may fluctuate based on the ActiveShield™ safety mechanism when the ambient temperature is between 26-35°C (78.8-95°F) with a high output load. ActiveShield™ enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices.
Declaration of Conformity
EU Declaration
Anker Innovations Limited declares that the product type A2343 is in compliance with Directive 2014/35/EU, 2014/30/EU, 2011/65/EU, 2009/125/EC & 2019/1782/EU.
The full text of the EU declaration of conformity is available at the following internet address: https://www.anker.com
GB Declaration
Anker Innovations Limited declares that the product type A2343 is in compliance with Electrical Equipment (Safety) Regulations 2016, Electromagnetic Compatibility Regulations 2016, The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012, and The Ecodesign for Energy-Related Products Regulations 2010.
The full text of the GB declaration of conformity is available at the following internet address: https://www.anker.com
Environmental Protection
This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. ♻️
Warranty & Support
Warranty
- 24-month limited warranty*
Technical Support
- Lifetime technical support
Contact Information
- Email: support@anker.com
- Customer Service Phone Numbers:
- US/CA: +1 (800) 988 7973
- UK: +44 (0) 1604 936200
- DE: +49 (0) 69 9579 7960
- Middle East & Africa: +971 42428633
- UAE: +971 8000320817
- KSA: +966 8008500030
- Kuwait: +965 22069086
- Egypt: +20 8000000826
- AU: +61 3 8331 4800
- TR: +90 (850) 460 14 14
- RU: +8 (800) 511-86-23
- China: +86 400 0550 036
- Japan: 03 4455 7823
- Korea: +82 02-1670-7098
*Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.