Teltonika TRB140 Datasheet

Hardware Overview

The TRB140 is an industrial IoT gateway featuring a compact design with various connectivity options.

Front View

• Power Socket
• Ethernet Port
• Power LED

Back View

• Mobile Network Type LEDs (2G, 3G, 4G)
• SIM Card Slot (behind a removable panel)
• USB Port
• Mobile Antenna Connector
• Reset Button
• Mobile Signal Strength Indication LEDs

Power Socket Pinout

• Power / Red wire
• I/O / Green wire
• Ground / Black wire
• I/O / White wire

Features

Mobile

• 4G (LTE) - Cat 4 up to 150 Mbps
• 3G - Up to 42 Mbps
• 2G - Up to 236.8 kbps
• Signal strength monitoring (RSSI, SINR, RSRP, RSRQ, EC/IO, RSCP)
• SMS support (status, configuration, send/read via HTTP POST/GET, EMAIL to SMS, etc.)
• USSD support
• Operator black/white list
• Multiple PDN support
• Band lock and used band status display
• Auto APN
• Bridge mode
• Passthrough mode

Network

• Static routing
• Supports TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, SFTP, FTP, SMTP, SSL/TLS, ARP, VRRP, PPP, PPPOE, UPNP, SSH, DHCP, Telnet, SMPP, SNMP, MQTT, Wake On Lan (WOL)
• VoIP passthrough support (H.323 and SIP-alg protocol NAT helpers)
• Connection monitoring (Ping Reboot, Wget Reboot, Periodic Reboot, LCP and ICMP)
• Port forwarding, traffic rules, custom rules
• DHCP server and relay
• QoS / Smart Queue Management (SQM) for traffic priority
• DDNS support
• Network backup and load balancing over multiple WAN connections
• SSHFS for remote file system mounting

Security

• Authentication: Pre-shared key, digital certificates, X.509 certificates, TACACS+, Radius, IP & Login attempts block
• Firewall: Pre-configured rules, CLI configuration, DMZ, NAT, NAT-T
• Attack prevention: DDOS prevention (SYN flood, SSH attack, HTTP/HTTPS attack), port scan prevention
• VLAN: Port and tag-based VLAN separation
• Mobile quota control
• WEB filter (blacklist/whitelist)
• Access control for TCP, UDP, ICMP packets, MAC address filter

VPN

• OpenVPN: Multiple clients and server, 27 encryption methods
• IPsec: IKEv1, IKEv2, 14 encryption methods
• GRE: GRE tunnel, GRE tunnel over IPsec
• PPTP, L2TP: Client/Server instances, L2TPv3, L2TP over IPsec
• Stunnel: TLS encryption for clients/servers
• DMVPN: Scalable IPsec VPNs
• SSTP: SSTP client support
• ZeroTier: ZeroTier VPN client support
• WireGuard: WireGuard VPN client and server support
• Tinc: Encryption, authentication, and compression support

Modbus and IoT Platforms

Modbus TCP Slave

• ID range: [1;255] or any
• Remote access via WAN
• Custom registers for extended functionality

Modbus TCP Master

• Supported functions: 01, 02, 03, 04, 05, 06, 15, 16
• Supported data formats: 8-bit, 16-bit, 32-bit (various endianness)

Data to Server

• Protocols: HTTP(S), MQTT, Azure MQTT, Kinesis
• MQTT Gateway: For sending commands and receiving data
• DNP3: TCP Master, DNP3 Outstation modes

Monitoring & Management

• WEB UI: HTTP/HTTPS for status, configuration, FW update, CLI, logs
• FOTA: Firmware update from server, automatic notification
• SSH: SSH (v1, v2)
• SMS: SMS status, configuration, send/read via HTTP POST/GET
• Call: Reboot, Status, Mobile data control, Output control
• TR-069: Supports various ACS platforms
• MQTT: MQTT Broker, MQTT publisher
• SNMP: SNMP (v1, v2, v3), SNMP Trap
• JSON-RPC: Management API over HTTP/HTTPS
• MODBUS: MODBUS TCP status/control
• RMS: Teltonika Remote Management System (RMS)

IoT Platforms

• Cloud of Things, ThingWorx, Cumulocity, Azure IoT Hub: Monitoring capabilities for device data, mobile data, network info, etc.

System Characteristics

• CPU: ARM Cortex-A7 1.2 GHz
• RAM: 128 MB, DDR2
• FLASH storage: 512 MB, SPI Flash

Firmware / Configuration

• WEB UI: Update FW from file, check FW on server, configuration profiles, configuration backup
• FOTA: Firmware update
• RMS: Update FW/configuration for multiple devices
• Keep settings: Update FW without losing current configuration

Firmware Customization

• Operating system: RutOS (OpenWrt based Linux OS)
• Supported languages: Busybox shell, Lua, C, C++
• Development tools: SDK package with build environment

Input/Output

• Input: 1 x Digital Input (0-6V low, 8-30V high)
• Output: 1 x Digital Output (Open collector, max 30V, 300mA)
• Events: Email, RMS, SMS
• I/O juggler: Allows setting I/O conditions for events

Power

• Connector: 4-pin industrial DC power socket
• Input voltage range: 9-30 VDC (reverse polarity protection, surge protection >31 VDC 10us max)
• PoE (passive): Powers up through LAN1 port (not compatible with IEEE802.3af, 802.3at, 802.3bt standards, Mode B, 9-30 VDC)
• Power consumption: <5 W

Physical Interfaces

• Ethernet: 1 x RJ45 port, 10/100/1000 Mbps
• I/O's: 1 x Digital Input, 1 x Digital Output on 4-pin power connector
• Status LEDs: 3 x connection status, 5 x signal strength, 2 x LAN status, 1 x Power LED
• SIM: 1 x SIM slot (Mini SIM - 2FF), 1.8 V/3 V
• Power: 1 x 4-pin power connector
• Antennas: 1 x SMA for LTE
• USB: 1 x Virtual network interface via micro USB
• Reset: Reboot/User default reset/Factory reset button

Physical Specification

• Casing material: Aluminum housing
• Dimensions (W x H x D): 74.5 x 25 x 64.4 mm
• Weight: 134 g
• Mounting options: Bottom and sideways DIN rail, Flat surface

Operating Environment

• Operating temperature: -40 °C to 75 °C
• Operating humidity: 10% to 90% non-condensing
• Ingress Protection Rating: IP30

Regulatory & Type Approvals

• Regulatory: CE/RED, EAC, RoHS, WEEE

EMC Emissions & Immunity

• Standards: EN 301 489-1, EN 301 489-17, EN 301 489-19, EN 301 489-52, FCC Part 15B, ANSI C63.4
• ESD: EN 61000-4-2
• RS: EN 61000-4-3
• EFT: EN 61000-4-4
• Surge protection: EN 61000-4-5
• CS: EN 61000-4-6
• DIP: EN 61000-4-11

RF

• Standards: EN 300 511, EN 301 908-1, EN 301 908-2, EN 301 908-13

Safety

• Standards: IEC 62368-1, EN 62368-1, EN 50385, EN 62232

What's in the Box?

Standard package contents:

• TRB140 Gateway
• 9 W PSU
• 1x LTE antenna (magnetic mount, SMA male, 3 m cable)
• Micro-USB cable (0.8 m)
• 1x hex key
• LAN cable
• QSG (Quick Start Guide)
• Packaging box

Standard Order Codes

Available Versions

TRB140 0*****
Region (Operator): Europe¹, Middle East, Africa, Korea, Thailand, India, Malaysia
Frequency: 4G (LTE-FDD): B1, B3, B7, B8, B20, B28A; 4G (LTE-TDD): B38, B40, B41; 3G: B1, B8; 2G: B3, B8

TRB140 1*****
Region (Operator): South America, Australia, New Zealand, Taiwan, Malaysia
Frequency: 4G (LTE-FDD): B1, B22, B3, B4, B5, B7, B8, B28; 4G (LTE-TDD): B40; 3G: B1, B2, B5, B8; 2G: B2, B3, B5, B8

TRB140 4*****
Region (Operator): Japan
Frequency: 4G (LTE-FDD): B1, B3, B8, B18, B19, B26; 4G (LTE-TDD): B41; 3G: B1, B6, B8, B19

¹ Regional availability - excluding Russia & Belarus.

TRB140 Spatial Measurements & Weight

Main Measurements

• W x H x D dimensions: 74.5 x 25 x 64.4 mm
• Device housing: 74.5 x 25 x 64.4 mm
• Box: 173 x 71 x 148 mm

Top View Measurements

Diagram showing top view dimensions: 70.6 mm, 64.4 mm, 74.5 mm.

Right View Measurements

Diagram showing right view dimensions: 25.0 mm, 64.4 mm, 70.6 mm, 6.4 mm.

Mounting Space Requirements

Diagram illustrating approximate device dimensions with cables and antennas attached: 74.5 mm, 25.0 mm, 134.40 mm, 40.0 mm, 30.0 mm.

DIN Rail Mounting

Diagram showing protrusion measurements for DIN Rail attachment: 25.0 mm, 17.0 mm.