Teltonika RUTX14: Quick Start Guide

Device Overview

Front View

The front panel of the RUTX14 features several indicators and ports:

• WAN Type LEDs: Indicate the status of the WAN connection.
• SIM Needle: Used to eject the SIM card tray.
• Power Socket: Connection point for the power adapter.
• Power LED: Indicates the power status of the device.
• Reset Button: Used to reset the device to factory defaults or reboot.
• WiFi Band LEDs: Indicate the status of the 2.4 GHz and 5 GHz WiFi bands.
• LAN Ethernet Ports: Four Gigabit Ethernet ports for wired network connections.
• WAN Ethernet Port: One Gigabit Ethernet port for the Wide Area Network connection.
• SIM Holders: Two slots for SIM cards.
• Mobile Network Type LEDs: Indicate the current mobile network technology (e.g., 3G, 4G).
• Mobile Signal Strength Indication LEDs: Show the strength of the cellular signal.

Back View

The back panel provides connectors for antennas and other peripherals:

• Mobile MAIN Antenna Connector: SMA male connector for the primary cellular antenna.
• Mobile AUX Antenna Connectors: Two SMA male connectors for auxiliary cellular antennas.
• GPS Antenna Connector: SMA male connector for the GPS antenna.
• Grounding Screw: For proper grounding of the device.
• WiFi Antenna Connectors: Two RP-SMA male connectors for WiFi antennas.
• Bluetooth Antenna Connector: RP-SMA male connector for the Bluetooth antenna.
• USB Port: For connecting external devices or storage.

Power Socket Pinout

The power socket pinout is as follows:

• Power / Red wire
• Input / Green wire
• Ground / Black wire
• Output / White wire

Hardware Installation

1. Pull out the SIM needle from the front panel and use it to push the SIM holder button.
2. Pull out the SIM holder.
3. Insert your SIM card into the SIM holder.
4. Slide the SIM holder back into the router.
5. Attach all antennas to their respective connectors.
6. Connect the power adapter to the device's power socket and plug the adapter into a power outlet.
7. Connect to the device wirelessly using the SSID and password from the device information label, or use an Ethernet cable connected to a LAN port.

Login to Device

To access the router's Web interface (WebUI):

1. Open your web browser and navigate to http://192.168.1.1.
2. Enter the username and password provided on the device information label for authentication.
3. Upon first login, you will be prompted to change your password for security. The new password must be at least 8 characters long, including an uppercase letter, a lowercase letter, and a digit.
4. After changing the password, the Configuration Wizard will launch to help set up main operating parameters.
5. On the Overview page, check the Signal Strength indication. Adjust antennas or device location for optimal cellular performance.

Authentication Screen Example (Image A): Displays fields for username and password, with a "LOG IN" button.

Mobile Status Example (Image B): Shows connection status, signal strength (-50 dBm), state (Registered, 4G LTE), SIM card status (Ready), and data usage (Bytes received/sent).

Technical Information

Radio Specifications

Bundled Accessories Specifications

*Order code dependent.

**Higher gain antenna can be connected to compensate for cable attenuation when a cable is used. The user is responsible for the compliance with the legal regulations.

Safety Information

The RUTX14 router must be used in compliance with all applicable national and international laws and special restrictions. The full text of the EU declaration of conformity is available at: https://wiki.teltonika-networks.com/view/RUTX14_CE/RED

The document also contains declarations of conformity in multiple languages, including English: "Hereby, TELTONIKA NETWORKS declares that this RUTX14 is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU."

General Instructions

WEEE Symbol: This sign indicates that electronic and electric equipment should not be mixed with general household waste. ♻️

CE Mark: This sign indicates that the product meets the requirements of the applicable EU directives. ✅

For specific instructions in various languages, please refer to the original document. The English instruction is: "Connect the power adapter to turn on the device. Open 192.168.1.1 in your web browser to configure it."