Lutron NRCS-1, NTRCS-1 Momentary Switch Installation Instructions

P/N 0301763 Rev. A 12/2014

Important Notes

Please read before installing.

  1. WARNING: Shock Hazard. May result in serious injury or death. Turn off power before installation or maintenance.
  2. WARNING: Shock Hazard. May result in serious injury or death. Do not run Class 1 and IEC PELV/NEC® Class 2 wires together in the same conduit.
  3. Install in accordance with national and local electrical codes.
  4. Do not connect to line voltage.
  5. cUL® Listed for use with Lutron® devices only.
  6. IEC PELV/NEC® Class 2 wiring: 14 AWG to 22 AWG (0.5 mm² to 2.5 mm²)

NRCS-1, NTRCS-1 Momentary Switch

24 V-/24 V~ 60 Hz 1.0 A IEC PELV/NEC® Class 2

IEC PELV/NEC® Class 2 Wiring (for applications with Lutron® devices)

Diagram Description: The diagram shows two wiring configurations for the momentary switch. The first shows an external momentary switch with a black wire labeled 'Common' connected to the switch. A yellow wire labeled 'Raise' and a red wire labeled 'Lower' are also shown connected to the switch.

The second diagram shows an internal momentary switch with a black wire labeled 'Common' connected to the switch. A yellow wire labeled 'Raise' and a red wire labeled 'Lower' are also shown connected to the switch.

Worldwide Technical and Sales Assistance

If you have questions concerning the installation or operation of this product, call the Lutron Technical Support Center. Please provide the exact model number when calling.

Limited Warranty

(Valid only in U.S.A., Canada, Puerto Rico, and the Caribbean.)

Lutron will, at its option, repair or replace any unit that is defective in materials or manufacture within one year after purchase. For warranty service, return unit to place of purchase or mail to Lutron at 7200 Suter Rd., Coopersburg, PA 18036-1299, postage pre-paid.

This warranty is in lieu of all other express warranties, and the implied warranty of merchantability is limited to one year from purchase. This warranty does not cover the cost of installation, removal or reinstallation, or damage resulting from misuse, abuse, or damage from improper wiring or installation. This warranty does not cover incidental or consequential damages. LUTRON'S LIABILITY ON ANY CLAIM FOR DAMAGES ARISING OUT OF OR IN CONNECTION WITH THE MANUFACTURE, SALE, INSTALLATION, DELIVERY, OR USE OF THE UNIT SHALL NEVER EXCEED THE PURCHASE PRICE OF THE UNIT.

This warranty gives you specific legal rights, and you may have other rights which vary from state to state. Some states do not allow the exclusion or limitation of incidental or consequential damages, or limitation on how long an implied warranty may last, so the above limitations may not apply to you.

Lutron and Nova T* are registered trademarks of Lutron Electronics Co., Inc. NEC is a registered trademark of the National Fire Protection Association, Quincy, Massachusetts.

©2014 Lutron Electronics Co., Inc.

Lutron Electronics Co., Inc. 7200 Suter Road Coopersburg, PA 18036-1299 U.S.A.

PDF preview unavailable. Download the PDF instead.

0301763 Install Guide Adobe PDF Library 10.0.1

Related Documents

Preview Lutron Service and Support Options for Contractors and Installers
Lutron offers comprehensive service and support options for contractors and installers, including pre-wire verification, post-wire termination verification, integration services, and startup options for commercial lighting and controls solutions.
Preview Caséta Wireless In-Wall Fan Control: Quick-Start Installation and Setup Guide
Comprehensive guide to installing and setting up the Lutron Caséta Wireless in-wall fan control (PD-FSQN). Learn about wiring, pairing with Pico remotes and the Lutron app, favorite settings, and troubleshooting for your smart home fan.
Preview Lutron Sunnata RF Switch HRST-8ANS Installation and Wiring Guide
Detailed installation and wiring guide for the Lutron Sunnata RF Switch (HRST-8ANS) and Companion Switch (HRST-RS). Covers single, two, and three-way switch configurations, load types, operation, system setup, and troubleshooting. Includes FCC/IC information.
Preview Lutron Athena Edge Processor Conversion Kit Specifications
Detailed specifications for the Lutron Athena Edge Processor Conversion Kit, enabling the upgrade of existing Quantum Light Management Hubs to the new Athena Edge processor. Includes features, compatibility, technical specifications, and wiring diagrams.
Preview Lutron RadioRA 2 Integration Guide for Luxor Controllers
A comprehensive guide detailing the integration of Lutron RadioRA 2 systems with Luxor Controllers, covering system requirements, setup procedures, device configuration, programming keypads, project transfer, and troubleshooting common issues.
Preview Lutron Vive Hub Installation Guide
Comprehensive installation instructions for the Lutron Vive Hub, including wiring, mounting, and programming details. Covers flush-mount and surface-mount options.
Preview Lutron Caseta Wireless In-wall Dimmer PRO Quick-Start Guide & Installation
This quick-start guide from Lutron provides essential instructions for installing and setting up the Caseta Wireless In-wall Dimmer PRO (PD-10NXD). Learn about smart lighting control, wireless setup, pairing with Pico remotes, and compatibility with various bulb types.
Preview Lutron PDT-T-DV-MF Multi-Feed DIN Module Terminal Kit Installation Guide
Detailed installation instructions for the Lutron PDT-T-DV-MF Multi-Feed DIN Module Terminal Kit. This guide covers safety precautions, component identification, and step-by-step wiring and mounting procedures for integrating the module into Lutron lighting control systems.