275W + 300W IP66 High Power Factor Weatherproof LED Driver
Product Overview
This document details the specifications for Havit Lighting's 275W and 300W IP66 High Power Factor Weatherproof LED Drivers.
Key Features
- Material: Aluminium
- Colour: Silver
- IP Rating: IP66 (Weatherproof)
- Input Voltage: 240v AC
- Output Voltage: Available in 12v DC or 24v DC
- Max Wattage: 275W or 300W (Recommended Max Wattage = 240W)
- Protection Class: 1 (Earth Required)
- Wiring: Parallel
- Number of Output Cables: 2
- Protections: Short Circuit, Overload, Over Temperature
- Warranty: 3 Years Replacement
Product Ordering
| Part Number | Output Voltage | Barcode |
|---|---|---|
| HV9658-12V275W | 12v DC Constant Voltage | 9350418005069 |
| HV9658-24V300W | 24v DC Constant Voltage | 9350418007841 |
Dimensions
The LED driver is constructed from aluminium with a silver finish. It is designed for outdoor and wet environments with an IP66 rating.
Visual Description of Dimensions: A diagram illustrates the product's form factor. The main body is rectangular with integrated heatsink fins along its length. Connection terminals for input and output are visible. Approximate overall dimensions are: Length approximately 277mm, Width approximately 95mm, and Height approximately 50mm.
Compatibility
This LED driver is compatible with a wide range of low voltage lighting applications:
- All Low Voltage Light Fittings
- LED Strip Lighting
- Garden Lighting
- Step Lighting
- And more
Technical Specifications
| Feature | HV9658-12V275W | HV9658-24V300W |
|---|---|---|
| DC Voltage | 12v DC | 24v DC |
| Voltage Tolerance | ± 4V | ± 2V |
| Rated Current | 23A | 12.5A |
| Rated Power | 275W | 300W |
| Line Regulation | ± 1% | ± 1% |
| No. Output Cables | 2 | 2 |
| Set up time | 2000ms, 50ms (at full load) 110V AC/230V AC | 2000ms, 50ms (at full load) 110V AC/230V AC |
| Holding time (Typ.) | 15ms (at full load) 110V AC/230V AC | 15ms (at full load) 110V AC/230V AC |
| Ripple and Noise (max) | 120mVp-p | 240mVp-p |
| Load Regulation | ± 2% | ± 2% |
| Voltage range Note 2 | 170~264V AC | 170~264V AC |
| Frequency Range | 47-63Hz | 47-63Hz |
| Power Factor (TYP.) @ Full Load | PF ≥ 0.90/230V | PF ≥ 0.90/230V |
| Efficiency (Typ.) @ Full Load | 91% | 91.5% |
| AC Current (Max) | 1.67A/230V AC | 1.67A/230V AC |
| Inrush Current (TYP.) | Cold start: 65A/230V AC | Cold start: 65A/230V AC |
| Leakage Current | <0.75mA/240V AC | <0.75mA/240V AC |
| Short Circuit | Hiccup mode, Recover automatically after fault condition is removed | Hiccup mode, Recover automatically after fault condition is removed |
| Overload | 110%-135% of the rated output power | 110%-135% of the rated output power |
| Over Temperature | Ta: 55°C ~ 65°C | Ta: 55°C ~ 65°C |
| Over Voltage | 13-18V | 24.5-35V |
| Working Temp. | Ta: -25°C ~ +50°C | Ta: -25°C ~ +50°C |
| Working Humidity | 10%~90% RH, non-condensing | 10%~90% RH, non-condensing |
| Storage TEMP. Humidity | -25°C ~+75°C, 5%~95% RH | -25°C ~+75°C, 5%~95% RH |
| TEMP. Coefficient | ± 0.05%/°c (0-40°c) | ± 0.05%/°c (0-40°c) |
| Vibration | 10~300Hz, 1G 10min./1 Cycle, Period for 60min, each along X,Y,Z axes | 10~300Hz, 1G 10min./1 Cycle, Period for 60min, each along X,Y,Z axes |
| Safety Standards | Compliance to EN61347-1, EN61347-2-13, AS/NZS61347-1, IP66 waterproof rating. | Compliance to EN61347-1, EN61347-2-13, AS/NZS61347-1, IP66 waterproof rating. |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100Mohms/500Vdc 25°C/70%RH | I/P-O/P, I/P-FG, O/P-FG: 100Mohms/500Vdc 25°C/70%RH |
| Withstand voltage | I/P-O/P: 3.75KVAC I/P-FG: 1.875KVAC O/P-FG: 0.5kVAC | I/P-O/P: 3.75KVAC I/P-FG: 1.875KVAC O/P-FG: 0.5kVAC |
| EMC Emission | Compliance to AS/NZS CISPR15 | Compliance to AS/NZS CISPR15 |
| EMC Immunity | Compliance to AS/NZS CISPR15 | Compliance to AS/NZS CISPR15 |
Visual Applications
The following descriptions are based on visual elements present in the original document:
- Image 1: A silver-colored, rectangular LED driver unit with prominent heatsink fins. It features an input/output terminal block and a small control panel with a display and buttons.
- Image 2: An interior scene showcasing modern architectural lighting, with light emanating from concealed sources within a ceiling structure.
- Image 3: An outdoor pathway with integrated step lighting and wall-mounted lights illuminating a garden area.
- Image 4: A close-up view of illuminated steps in an outdoor setting, highlighting the lighting effect.
- Image 5: An interior space with a high, vaulted ceiling featuring integrated lighting that follows the architectural lines.
