150W IP66 High Power Factor Weatherproof LED Driver
Product Overview
This document details the Havit Lighting 150W IP66 High Power Factor Weatherproof LED Driver, designed for reliable power supply to low voltage LED lighting systems.
Key Features:
- Material: Aluminium
- Colour: Silver
- IP Rating: IP66 (waterproof and dustproof)
- Input Voltage: 240v AC
- Output Voltage: Available in 12v DC Constant Voltage or 24v DC Constant Voltage
- Max Wattage: 150W (Recommended Max Wattage = 120W)
- Protection Class: Class 1 (Earth Required)
- Wiring: Parallel
- No. Output Cables: 1
- Protections: Short Circuit, Overload, Over Temperature
- Warranty: 3 Years Replacement
The LED driver unit is a silver, rectangular device featuring input and output cables. It is CE certified and meets IP66 waterproof standards.
Applications
This driver is compatible with all low voltage light fittings and is suitable for various lighting applications, including:
- LED Strip Lighting: Ideal for interior accent lighting, such as in bathrooms and vanities, providing subtle illumination.
- Garden Lighting: Enhances outdoor spaces with reliable power for landscape lighting.
- Step Lighting & more: Versatile for illuminating staircases and other architectural features.
The product is designed for diverse lighting environments, from indoor residential spaces to outdoor garden settings.
Product Ordering
| Part Number | Output Voltage | Barcode |
|---|---|---|
| HV9658-12V150W | 12v DC Constant Voltage | 9350418008039 |
| HV9658-24V150W | 24v DC Constant Voltage | 9350418008046 |
Dimensions
The LED driver is a rectangular unit with input and output connections. Overall dimensions are approximately 247mm in length, with a body length of 233mm. The width is 67.5mm and the height is 40mm. The output cables have a diameter of approximately Ø5mm.
Technical Specifications
| Parameter | HV9658-12V150W | HV9658-24V150W |
|---|---|---|
| Output | ||
| DC Voltage | 12v DC | 24v DC |
| Voltage Tolerance | ± 4V | ± 2V |
| Rated Current | 12.5A | 6.25A |
| Rated Power | 150W | 150W |
| Line Regulation | ± 1% | ± 1% |
| No. Output Cables | 1 | 1 |
| Set up time | 2000ms, 50ms(at full load) 110V AC / 230V AC | |
| Holding time (Typ.) | 15ms(at full load) 110V AC / 230V AC | |
| Ripple and Noise(max) | 120mVp-p | 240mVp-p |
| Load Regulation | ± 2% | ± 2% |
| Input | ||
| Voltage range Note 2 | 170~264V AC | |
| Frequency Range | 47 - 63Hz | |
| Power Factor (TYP.) @ Full Load | PF ≥ 0.90 / 230V (at full load) | |
| Efficiency(Typ.)@ Full Load | 89.5% | 90.5% |
| AC Current (Max) | 1.0A / 230V AC | |
| Inrush Current (TYP.) | Cold start: 50A / 230V AC | |
| Leakage Current | <0.75mA / 240V AC | |
| Protections | ||
| Short Circuit | Hiccup mode, Recover automatically after fault condition is removed | |
| Overload | 110% - 130% of the rated output power | |
| Over Temperature | Ta: 55°C ~ 65°C | |
| Over Voltage | 13-18V | 24.5-35V |
| Environment | ||
| Working Temp. | Ta: -25°C ~ +50°C | |
| Working Humidity | 10%~90% RH, non-condensing | |
| Storage TEMP. Humidity | -25°C ~ +75°C, 5%~95% RH | |
| TEMP. Coefficient | ± 0.05%/°C (0-40°C) | |
| Vibration | 10~300Hz, 1G 10min./ 1 Cycle, Period for 60min, each along X,Y,Z axes | |
| Safety & EMC | ||
| Safety Standards | Compliance to EN61347-1, EN61347-2-13, AS/NZS61347-1, IP66 waterproof rating. [certified product] | |
| Isolation Resistance | I/P-O/P, I/P-FG, O/P-FG: 100Mohms/500Vdc 25°C /70%RH | |
| Withstand voltage | I/P-O/P: 3.75KVAC I/P-FG: 1.875KVAC O/P-FG: 0.5kVAC | |
| EMC Emission | Compliance to AS/NZS CISPR15 | |
| EMC Immunity | Compliance to AS/NZS CISPR15 | |
