Anker Prime Charger (100W, 3 Ports, GaN) - Quick Start Guide

Live Charged.

Attention

The product is designed for use with IT equipment only.

The product is intended to be operated up to 2000m above sea level.

The disconnection from line voltage is made by AC plug.

Safety Precautions (Japanese):

To prevent fire, explosion, or injury, stop using immediately if there are defects such as damage, water exposure, foreign object in product input/output ports, swelling, smoke, unusual smell, unusual noise, abnormal heat, liquid leakage, or abnormal charging.
To prevent fire, explosion, or injury, do not use or store in environments with direct sunlight, inside a hot car, near fire, in humid places, or in wet areas.
To prevent fire, explosion, or injury, do not apply excessive impact, disassemble, modify, or repair the product.
Ensure the power plug is fully inserted into the outlet.
If dust or foreign objects are attached to the power plug or product output port, remove them before use.
To prevent short circuits, do not insert metal objects such as pins into the input/output ports. Do not carry or store with metal necklaces or hairpins.

Declaration of Conformity

Anker Innovations Limited declares that this product complies with Directive 2014/35/EU, 2014/30/EU, 2011/65/EU, 2009/125/EC, and 2019/1782/EU.

The full text of the EU declaration of conformity is available at: https://support.anker.com/s/articleRecommend?otherType=Anker_EN_Extemal_Manual_and_Download&secondType=doc

Using Your Product

For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com

Or scan the QR code below:

[QR Code]

Specifications

Input

100-240V~, 2.1A, 50-60Hz

Output

USB-C1 (Top Port):

One Port in Use: 100.0W Max
USB-C1 / C2: 5.0V 3.0A, 15.0W / 9.0V 3.0A, 27.0W / 15.0V 3.0A, 45.0W / 20.0V 5.0A, 100.0W (100.0W Max)

USB-A:

5.0V 3.0A, 15.0W / 9.0V 2.0A, 18.0W / 10.0V 2.25A, 22.5W / 12.0V 1.5A, 18.0W (22.5W Max)

Multiple Ports in Use:

Two Ports in Use: 100.0W Max
Three Ports in Use: 89.0W Max
Total Output: 100.0W Max

Average Active Efficiency

85.00%

Efficiency at Low Load (10%)

80.37%

No-Load Power Consumption

0.20W

Operating Temperature

0-25℃ / 32-77 ℉

*ActiveShield™ enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices. High temperatures will reduce charging speed and restrict power, which happens to all chargers.

Recycling Information

This symbol indicates that this product shall not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

Contact Information

Australian and New Zealand customers: Visit www.anker.com/au/support/warranty or scan the QR code for warranty information.

Support Email: support@anker.com

Phone Support:

(US/CA) +1 (800) 988 7973
(UK) +44 (0) 1604 936200
(DE) +49 (0) 69 9579 7960
(Middle East & Africa) +971 529750842
(UAE) +971 8000320817
(KSA) +966 8008500030
(Kuwait) +965 22069086
(Egypt) +20 8000000826
(TR) +90 0850 460 14 14
(RU) +8 (800) 511-86-23
(India) +91 18003138831
(中国) +86 400 0550 036
(日本) 03 4455 7823
(한국) +82 02-1661-9246

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio / TV technician for help.

The following importer is the responsible party (for FCC matters only):

Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764
Telephone: +1 (800) 988 79733

Industry Canada Statement

This device complies with Industry Canada license-ICES-003. Operation is subject to the following two conditions: (1) This device may not cause interference, and (2) This device must accept any interference, including interference that may cause undesired operation.

Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence. L'exploitation est autorisée aux deux conditions suivantes : (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

IC Statement: This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

Déclaration d'Industrie Canada: Cet appareil numérique est conforme à la norme NMB-003 du Canada.

Important Information

High Temperature Warning:

Indoor use only.

	Anker Prime 100W GaN Wall Charger (3 Ports) User Manual User manual for the Anker Prime 100W GaN Wall Charger (3 Ports), model A2343. Provides safety precautions, usage instructions, detailed specifications, declaration of conformity, warranty, and customer support information.
	Anker Prime 100W GaN Wall Charger (3 Ports) User Manual User manual for the Anker Prime 100W GaN Wall Charger. Provides detailed information on product features, specifications, safety precautions, compliance, and customer support. Learn how to safely and efficiently charge your devices.
	Anker Prime 240W GaN Desktop Charger (4 Ports) User Manual User manual for the Anker Prime 240W GaN Desktop Charger, detailing specifications, usage, safety precautions, warranty information, and support contacts. Features 4 ports for fast charging multiple devices.
	Anker Prime 240W GaN Desktop Charger (4 Ports) User Manual User manual for the Anker Prime 240W GaN Desktop Charger, detailing its features, specifications, usage instructions, warranty, and support information.
	Anker Prime 250W 6-Port GaNPrime Charger User Guide and Safety Information Comprehensive user guide and safety information for the Anker Prime 250W 6-Port GaNPrime Charger (Model A2345). Includes specifications, operating instructions, and compliance details.
	Anker Prime Charger (200W, 6 Ports, GaN) Quick Start Guide Quick start guide for the Anker Prime Charger, a 200W 6-port GaN charging station. This guide provides essential information on product usage, specifications, and safety precautions.
	Anker 737 Charger (120W GaNPrime) User Manual \| Features, Specs, and Safety User manual for the Anker 737 Charger (120W GaNPrime). Provides detailed information on product usage, safety guidelines, technical specifications, input/output power, efficiency, operating temperature, warranty, and customer support contact details.
	Anker 335 Charger (67W) User Manual - Fast Charging Guide Comprehensive user manual for the Anker 335 Charger (67W, Model A2673). Learn about safety precautions, product usage, specifications, charging outputs, and warranty information.