Anker Prime 240W GaN Desktop Charger (4 Ports)

Safety Precautions

⚠️ The product is designed for use with IT equipment only.

⚠️ Naked flame sources, such as candles, must not be placed on the product.

The disconnection from line voltage is made by AC plug.

In case of broken plugs, the product must be disposed of.

If you want to clean the product, only use a dry cloth or brush.

The socket-outlet shall be installed near the equipment and shall be easily accessible.

The power supply is not intended to be repaired by service personnel in case of failure or component defect; the product can be disposed of.

Connect your charger to a 2021 Apple MacBook Pro (16") using a USB-C to MagSafe 3 cable to achieve max power (28V 5A) from a single port.

Using Your Product

The Anker Prime 240W GaN Desktop Charger is designed for efficient and fast charging of compatible devices.

Port Configuration: The charger features four ports:

• USB-C1
• USB-C2
• USB-C3
• USB-A

Charging Recommendations:

• For the fastest and safest charge, use an Anker® cable, your device's original cable, or another certified cable (such as MFi).
• When charging two laptops simultaneously, it is recommended to use the USB-C1 and USB-C2 ports.

Power plugs can differ depending on the region.

Specifications

Input

• 100-240V~ 3.5A, 50-60Hz

Output

Total Output

Single Port Output

• USB-C1: 5V 3A / 9V 3A / 15V 3A / 20V 5A / 28V 5A (140W Max)
• USB-C2 / USB-C3: 5V 3A / 9V 3A / 15V 3A / 20V 5A (100W Max)
• USB-A: 5V 3A / 5V 4.5A / 9V 2A / 12V 1.5A / 4.5V 5A / 10V 2.25A (22.5W Max)

Dual Port Output

• USB-C1 + USB-C2/C3: 140W + 100W Max
• USB-C2 + USB-C3: 100W Max
• USB-C1 + USB-A: 140W + 22.5W Max
• USB-C2/C3 + USB-A: 100W Max

Triple Port Output

• USB-C1 + (USB-C2 + USB-C3): 140W + 100W Max
• USB-C1 + (USB-C2 + USB-A): 140W + 100W Max
• USB-C1 + (USB-C3 + USB-A): 140W + 100W Max
• USB-C2 + USB-C3 + USB-A: 100W Max

Quad Port Output

• Total Output: 240W Max

Efficiency

• Average Active Efficiency: 86.06%
• Efficiency at Low Load (10%): 76.49%

Power Consumption

• No-Load Power Consumption: 0.25W

Operating Temperature

• 0-25°C / 32-77°F

Note: To ensure electrical safety and product performance, the output power may fluctuate based on the ActiveShield™ safety mechanism when the ambient temperature is between 26-35°C (78.8-95°F) with a high output load. ActiveShield™ enhances protection by intelligently monitoring temperature and adjusting power output to safeguard your connected devices.

Warranty and Support

Warranty

24-month limited warranty. Please note that your rights under applicable law governing the sale of consumer goods remain unaffected by the warranties given in this Limited Warranty.

Technical Support

Lifetime technical support.

Contact Information

For FAQs and more information, please visit: anker.com/support

For tutorial videos, FAQs, manuals, and more information, please visit: https://support.anker.com

Customer Service Phone Numbers:

• US/CA: +1 (800) 988 7973
• UK: +44 (0) 1604 936200
• DE: +49 (0) 69 9579 7960
• Middle East & Africa: +971 529750842
• UAE: +971 8000320817
• KSA: +966 8008500030
• Kuwait: +965 22069086
• Egypt: +20 8000000826
• AU: +61 3 8331 4800
• TR: +90 0850 460 14 14
• RU: +8 (800) 511-86-23
• India: +91 18003138831
• China: +86 400 0550 036
• Japan: 03 4455 7823
• Korea: +82 02-1661-9246

Email: support@anker.com, support.mea@anker.com (For Middle East and Africa Only)

Social Media: [Facebook] @anker_official, [Facebook] @AnkerDeutschland, [Facebook] @AnkerOfficial, [Twitter] @anker_jp, [Twitter] @AnkerJapan, [Twitter] @Anker_JP, [Instagram] @Anker

Compliance Information

FCC Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio / TV technician for help.

IC Statement

This digital apparatus complies with CAN ICES-003(B)/NMB-003(B).

Declaration of Conformity

Anker Innovations Limited declares that the product type A2342 is in compliance with Directive 2014/35/EU & 2014/30/EU & 2011/65/EU & 2009/125/EC & 2019/1782/EU. The full text of the EU declaration of conformity is available at: https://www.anker.com

Anker Innovations Limited declares that the product type A2342 is in compliance with Electrical Equipment (Safety) Regulations 2016 & Electromagnetic Compatibility Regulations 2016 & The Restriction of the Use of Certain Hazardous Substances in Electrical and Electronic Equipment Regulations 2012 & The Ecodesign for Energy-Related Products Regulations 2010. The full text of the GB declaration of conformity is available at: https://www.anker.com.

Product Details

Product Number: A2342

Importer (Responsible Party for FCC matters): Fantasia Trading LLC, 5350 Ontario Mills Pkwy, Suite 100, Ontario, CA 91764

Importer (Responsible Party for EU and UK matters): Anker Innovations Deutschland GmbH, Georg-Muche-Strasse 3, 80807 Munich, Germany; Anker Technology (UK) Limited, GNR8, 49 Clarendon Road, Watford, Hertfordshire, WD17 1HP, United Kingdom

Manufacturer: Anker Innovations Limited, Room 1318-19, Hollywood Plaza, 610 Nathan Road, Mongkok, Kowloon, Hong Kong

Indoor use only. For use at altitudes up to 2000m.

[Recycling] This symbol indicates that this product shall not be treated as household waste. Instead, it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.