Scope of Application
The WoodandHearts "Big Bridge" Swedish Ladder is a versatile sports equipment designed for exercises, developing coordination, balance, musculature, and improving strength and endurance. It is suitable for use by children under adult supervision. Incorrect assembly or use may lead to injuries. Please follow the instructions carefully for safe installation and use.
Recommended Age: 3 to 16 years
Maximum Load Capacity: 60 kg / 132 lbs
Terms of Use
- Before assembly, check the completeness of the set and notify the manufacturer of any missing parts via the provided email address.
- For indoor use only.
- The product has no expiration term, but replace it immediately if any damage occurs.
- Warranty: 2 years.
Notes:
- Warranty does not apply if the product is damaged due to weather conditions, as it is for indoor use only.
- The manufacturer reserves the right to make structural changes without prior notice, provided they do not affect functionality, safety, or key features.
- The manufacturer and seller are not responsible for damages incurred due to improper use or failure to comply with instructions.
- Responsibility for any damage incurred by children during play rests with the supervising adults. In case of injury, treat the wound and consult a doctor.
Safety Measures
- Assembly must be performed by an adult. Do not attempt assembly without following instructions; an improperly assembled product can be unstable and unsafe.
- The product contains small parts that pose a choking hazard when disassembled. Ensure all screws and fastenings are securely tightened after assembly. Keep spare screws out of reach of children.
- Use only under direct adult supervision. Never leave a child alone with the product.
- Tighten screws every 2 months and regularly check for signs of wear. Stop use immediately if wear or damage is visible.
- Do not exceed the maximum weight limit. To prevent overcrowding and ensure stability, limit the number of children using the climber at one time based on recommended weight, size, and design.
- Do not use on uneven or sloping walls.
- Do not use if the product has visible damage or is positioned abnormally.
- Do not use if the floor beneath is wet or contaminated.
- Place the product at least 2m away from windows, sharp corners, hard furniture, or other hazards. Ensure the area around the climber is clear and safe.
- Do not place near heat sources or in direct sunlight.
- Do not modify the ladder or add homemade extensions unless you are sure they are safe and compatible, as modifications can affect stability and safety.
- Ensure children wear appropriate footwear with good grip for physical activity.
- Do not let children climb onto the upper rail or horizontal bar.
- Ensure the product is securely attached to the wall for stability and to prevent falling.
Care and Maintenance
- To clean, wipe with a damp cloth or wet wipes.
- Avoid excessive moisture, as water can penetrate seams or microcracks and damage the wood. Wipe dry immediately if spillage occurs.
- Do not use abrasive sponges, aggressive detergents, alcohol, or acetone.
- Do not leave the product outdoors or near heat sources (radiators, fireplaces).
- For scuffs or fading, you can restore the varnish or paint layer using the same water-based substance used originally. Clean and lightly sand the surface before re-coating.
- If the product is not used for a long time, store it in a dry room with moderate humidity (40-60%); avoid damp or uninsulated areas.
Assembly Instructions
Parts List:
The manual details various parts labeled with numbers (1-18) and letters (a-h) for screws and tools. Key components include:
- Side stands (rope and wooden ladder types)
- Planks for rope and general use
- Monkey bar parts
- Mounting plank for wall
- Short and long rods
- Rope
- Various screws (6x50, 6x100, 6x70, 6.3x30)
- Dowel (10x80)
- Hex key (4mm)
- TORX key
Step-by-Step Assembly:
The assembly involves multiple steps, including:
- Attaching side stands using screws.
- Assembling the main structure by connecting rods to sidewalls and inserting planks.
- Inserting and securing ropes through holes and slots, tying knots at specified intervals.
- Repeating rope insertion and knot-tying for multiple rungs.
- Attaching monkey bar parts.
- Connecting mounting plank parts.
- Securing the monkey bar structure to the ladder sides.
- Fixing planks on the ladder sides.
Mounting to a Wall:
Mounting to a Drywall:
Fasten the structure only into the wooden studs of the wall using self-tapping screws (d).
Mounting to a Brick or Concrete Wall:
Attach the finished product to the wall using dowels (e) and self-tapping screws (d).
Possible Add-ons: Climbing Wall
The manual also describes optional climbing wall add-ons, including panels and climbing holds, with instructions for attachment using self-tapping screws. It advises mounting the climbing wall onto the wooden frame of the structure for drywall, and using wall plugs for brick or concrete walls.
Additional accessories mentioned include:
- Soft mat
- Rope with round platform
- Rope with spheres
- Gymnastic rings
- Rope ladder
Disposal and Environmental Information
Dispose of the product in accordance with local waste regulations. Components can be recycled where applicable.
Manufacturer
Look for manufacturer information on the product packaging.
